linux-kernel - [PATCH v3 16/33] mtd: rawnand: nandsim: convert driver to nand

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20180719230026.8741-17-miquel.raynal@bootlin.com>
Date:   Fri, 20 Jul 2018 01:00:09 +0200
From:   Miquel Raynal <miquel.raynal@...tlin.com>
To:     Wenyou Yang <wenyou.yang@...rochip.com>,
        Josh Wu <rainyfeeling@...look.com>,
        Tudor Ambarus <Tudor.Ambarus@...rochip.com>,
        Boris Brezillon <boris.brezillon@...tlin.com>,
        Miquel Raynal <miquel.raynal@...tlin.com>,
        Richard Weinberger <richard@....at>,
        David Woodhouse <dwmw2@...radead.org>,
        Brian Norris <computersforpeace@...il.com>,
        Marek Vasut <marek.vasut@...il.com>,
        Nicolas Ferre <nicolas.ferre@...rochip.com>,
        Alexandre Belloni <alexandre.belloni@...tlin.com>,
        Kamal Dasu <kdasu.kdev@...il.com>,
        Masahiro Yamada <yamada.masahiro@...ionext.com>,
        Han Xu <han.xu@....com>,
        Harvey Hunt <harveyhuntnexus@...il.com>,
        Vladimir Zapolskiy <vz@...ia.com>,
        Sylvain Lemieux <slemieux.tyco@...il.com>,
        Xiaolei Li <xiaolei.li@...iatek.com>,
        Matthias Brugger <matthias.bgg@...il.com>,
        Maxime Ripard <maxime.ripard@...tlin.com>,
        Chen-Yu Tsai <wens@...e.org>,
        Marc Gonzalez <marc.w.gonzalez@...e.fr>,
        Mans Rullgard <mans@...sr.com>, Stefan Agner <stefan@...er.ch>
Cc:     linux-mtd@...ts.infradead.org,
        linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
        bcm-kernel-feedback-list@...adcom.com,
        linux-mediatek@...ts.infradead.org
Subject: [PATCH v3 16/33] mtd: rawnand: nandsim: convert driver to nand_scan()

Two helpers have been added to the core to make ECC-related
configuration between the detection phase and the final NAND scan. Use
these hooks and convert the driver to just use nand_scan() instead of
both nand_scan_ident() and nand_scan_tail().

Signed-off-by: Miquel Raynal <miquel.raynal@...tlin.com>
---
 drivers/mtd/nand/raw/nandsim.c | 82 +++++++++++++++++++++++-------------------
 1 file changed, 45 insertions(+), 37 deletions(-)

diff --git a/drivers/mtd/nand/raw/nandsim.c b/drivers/mtd/nand/raw/nandsim.c
index 8a3b36cfe5ea..62162b4f223c 100644
--- a/drivers/mtd/nand/raw/nandsim.c
+++ b/drivers/mtd/nand/raw/nandsim.c
@@ -2192,6 +2192,48 @@ static void ns_nand_read_buf(struct mtd_info *mtd, u_char *buf, int len)
 	return;
 }
 
+static int ns_attach_chip(struct nand_chip *chip)
+{
+	unsigned int eccsteps, eccbytes;
+
+	if (!bch)
+		return 0;
+
+	if (!mtd_nand_has_bch()) {
+		NS_ERR("BCH ECC support is disabled\n");
+		return -EINVAL;
+	}
+
+	/* Use 512-byte ecc blocks */
+	eccsteps = nsmtd->writesize / 512;
+	eccbytes = ((bch * 13) + 7) / 8;
+
+	/* Do not bother supporting small page devices */
+	if (nsmtd->oobsize < 64 || !eccsteps) {
+		NS_ERR("BCH not available on small page devices\n");
+		return -EINVAL;
+	}
+
+	if (((eccbytes * eccsteps) + 2) > nsmtd->oobsize) {
+		NS_ERR("Invalid BCH value %u\n", bch);
+		return -EINVAL;
+	}
+
+	chip->ecc.mode = NAND_ECC_SOFT;
+	chip->ecc.algo = NAND_ECC_BCH;
+	chip->ecc.size = 512;
+	chip->ecc.strength = bch;
+	chip->ecc.bytes = eccbytes;
+
+	NS_INFO("Using %u-bit/%u bytes BCH ECC\n", bch, chip->ecc.size);
+
+	return 0;
+}
+
+static struct nand_controller_ops ns_controller_ops = {
+	.attach_chip = ns_attach_chip,
+};
+
 /*
  * Module initialization function
  */
@@ -2276,44 +2318,10 @@ static int __init ns_init_module(void)
 	if ((retval = parse_gravepages()) != 0)
 		goto error;
 
-	retval = nand_scan_ident(nsmtd, 1, NULL);
+	chip->dummy_controller.ops = &ns_controller_ops;
+	retval = nand_scan(nsmtd, 1);
 	if (retval) {
-		NS_ERR("cannot scan NAND Simulator device\n");
-		goto error;
-	}
-
-	if (bch) {
-		unsigned int eccsteps, eccbytes;
-		if (!mtd_nand_has_bch()) {
-			NS_ERR("BCH ECC support is disabled\n");
-			retval = -EINVAL;
-			goto error;
-		}
-		/* use 512-byte ecc blocks */
-		eccsteps = nsmtd->writesize/512;
-		eccbytes = (bch*13+7)/8;
-		/* do not bother supporting small page devices */
-		if ((nsmtd->oobsize < 64) || !eccsteps) {
-			NS_ERR("bch not available on small page devices\n");
-			retval = -EINVAL;
-			goto error;
-		}
-		if ((eccbytes*eccsteps+2) > nsmtd->oobsize) {
-			NS_ERR("invalid bch value %u\n", bch);
-			retval = -EINVAL;
-			goto error;
-		}
-		chip->ecc.mode = NAND_ECC_SOFT;
-		chip->ecc.algo = NAND_ECC_BCH;
-		chip->ecc.size = 512;
-		chip->ecc.strength = bch;
-		chip->ecc.bytes = eccbytes;
-		NS_INFO("using %u-bit/%u bytes BCH ECC\n", bch, chip->ecc.size);
-	}
-
-	retval = nand_scan_tail(nsmtd);
-	if (retval) {
-		NS_ERR("can't register NAND Simulator\n");
+		NS_ERR("Could not scan NAND Simulator device\n");
 		goto error;
 	}
 
-- 
2.14.1