| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20180719230026.8741-33-miquel.raynal@bootlin.com>
Date: Fri, 20 Jul 2018 01:00:25 +0200
From: Miquel Raynal <miquel.raynal@...tlin.com>
To: Wenyou Yang <wenyou.yang@...rochip.com>,
Josh Wu <rainyfeeling@...look.com>,
Tudor Ambarus <Tudor.Ambarus@...rochip.com>,
Boris Brezillon <boris.brezillon@...tlin.com>,
Miquel Raynal <miquel.raynal@...tlin.com>,
Richard Weinberger <richard@....at>,
David Woodhouse <dwmw2@...radead.org>,
Brian Norris <computersforpeace@...il.com>,
Marek Vasut <marek.vasut@...il.com>,
Nicolas Ferre <nicolas.ferre@...rochip.com>,
Alexandre Belloni <alexandre.belloni@...tlin.com>,
Kamal Dasu <kdasu.kdev@...il.com>,
Masahiro Yamada <yamada.masahiro@...ionext.com>,
Han Xu <han.xu@....com>,
Harvey Hunt <harveyhuntnexus@...il.com>,
Vladimir Zapolskiy <vz@...ia.com>,
Sylvain Lemieux <slemieux.tyco@...il.com>,
Xiaolei Li <xiaolei.li@...iatek.com>,
Matthias Brugger <matthias.bgg@...il.com>,
Maxime Ripard <maxime.ripard@...tlin.com>,
Chen-Yu Tsai <wens@...e.org>,
Marc Gonzalez <marc.w.gonzalez@...e.fr>,
Mans Rullgard <mans@...sr.com>, Stefan Agner <stefan@...er.ch>
Cc: linux-mtd@...ts.infradead.org,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
bcm-kernel-feedback-list@...adcom.com,
linux-mediatek@...ts.infradead.org
Subject: [PATCH v3 32/33] mtd: rawnand: do not export nand_scan_[ident|tail]() anymore
Both nand_scan_ident() and nand_scan_tail() helpers used to be called
directly from controller drivers that needed to tweak some ECC-related
parameters before nand_scan_tail(). This separation prevented dynamic
allocations during the phase of NAND identification, which was
inconvenient.
All controller drivers have been moved to use nand_scan(), in
conjunction with the chip->ecc.[attach|detach]_chip() hooks that
actually do the required tweaking sequence between both ident/tail
calls, allowing programmers to use dynamic allocation as they need all
across the scanning sequence.
Signed-off-by: Miquel Raynal <miquel.raynal@...tlin.com>
---
drivers/mtd/nand/raw/nand_base.c | 60 +++++++++++++++++++++++++++++++---------
include/linux/mtd/rawnand.h | 11 ++------
2 files changed, 50 insertions(+), 21 deletions(-)
diff --git a/drivers/mtd/nand/raw/nand_base.c b/drivers/mtd/nand/raw/nand_base.c
index dea41fa25be1..dfee2556a8a8 100644
--- a/drivers/mtd/nand/raw/nand_base.c
+++ b/drivers/mtd/nand/raw/nand_base.c
@@ -5151,6 +5151,7 @@ static int nand_flash_detect_onfi(struct nand_chip *chip)
{
struct mtd_info *mtd = nand_to_mtd(chip);
struct nand_onfi_params *p;
+ char *model;
char id[4];
int i, ret, val;
@@ -5225,8 +5226,15 @@ static int nand_flash_detect_onfi(struct nand_chip *chip)
sanitize_string(p->manufacturer, sizeof(p->manufacturer));
sanitize_string(p->model, sizeof(p->model));
- strncpy(chip->parameters.model, p->model,
- sizeof(chip->parameters.model) - 1);
+ model = kmemdup(p->model, sizeof(p->model), GFP_KERNEL);
+ if (!model) {
+ ret = -ENOMEM;
+ goto free_onfi_param_page;
+ }
+
+ chip->parameters.model = model;
+ if (!mtd->name)
+ mtd->name = chip->parameters.model;
mtd->writesize = le32_to_cpu(p->byte_per_page);
@@ -5306,6 +5314,7 @@ static int nand_flash_detect_jedec(struct nand_chip *chip)
struct nand_jedec_params *p;
struct jedec_ecc_info *ecc;
int jedec_version = 0;
+ char *model;
char id[5];
int i, val, ret;
@@ -5356,8 +5365,16 @@ static int nand_flash_detect_jedec(struct nand_chip *chip)
sanitize_string(p->manufacturer, sizeof(p->manufacturer));
sanitize_string(p->model, sizeof(p->model));
- strncpy(chip->parameters.model, p->model,
- sizeof(chip->parameters.model) - 1);
+ model = kzalloc(sizeof(p->model), GFP_KERNEL);
+ if (!p) {
+ ret = -ENOMEM;
+ goto free_jedec_param_page;
+ }
+
+ strncpy(model, p->model, sizeof(model) - 1);
+ chip->parameters.model = model;
+ if (!mtd->name)
+ mtd->name = chip->parameters.model;
mtd->writesize = le32_to_cpu(p->byte_per_page);
@@ -5924,7 +5941,7 @@ static int nand_dt_init(struct nand_chip *chip)
}
/**
- * nand_scan_ident - [NAND Interface] Scan for the NAND device
+ * nand_scan_ident - Scan for the NAND device
* @mtd: MTD device structure
* @maxchips: number of chips to scan for
* @table: alternative NAND ID table
@@ -5932,9 +5949,13 @@ static int nand_dt_init(struct nand_chip *chip)
* This is the first phase of the normal nand_scan() function. It reads the
* flash ID and sets up MTD fields accordingly.
*
+ * This helper used to be called directly from controller drivers that needed
+ * to tweak some ECC-related parameters before nand_scan_tail(). This separation
+ * prevented dynamic allocations during this phase which was unconvenient and
+ * as been banned for the benefit of the ->init_ecc()/cleanup_ecc() hooks.
*/
-int nand_scan_ident(struct mtd_info *mtd, int maxchips,
- struct nand_flash_dev *table)
+static int nand_scan_ident(struct mtd_info *mtd, int maxchips,
+ struct nand_flash_dev *table)
{
int i, nand_maf_id, nand_dev_id;
struct nand_chip *chip = mtd_to_nand(mtd);
@@ -6008,7 +6029,11 @@ int nand_scan_ident(struct mtd_info *mtd, int maxchips,
return 0;
}
-EXPORT_SYMBOL(nand_scan_ident);
+
+static void nand_scan_ident_cleanup(struct nand_chip *chip)
+{
+ kfree(chip->parameters.model);
+}
static int nand_set_ecc_soft_ops(struct mtd_info *mtd)
{
@@ -6385,14 +6410,14 @@ static bool nand_ecc_strength_good(struct mtd_info *mtd)
}
/**
- * nand_scan_tail - [NAND Interface] Scan for the NAND device
+ * nand_scan_tail - Scan for the NAND device
* @mtd: MTD device structure
*
* This is the second phase of the normal nand_scan() function. It fills out
* all the uninitialized function pointers with the defaults and scans for a
* bad block table if appropriate.
*/
-int nand_scan_tail(struct mtd_info *mtd)
+static int nand_scan_tail(struct mtd_info *mtd)
{
struct nand_chip *chip = mtd_to_nand(mtd);
struct nand_ecc_ctrl *ecc = &chip->ecc;
@@ -6716,7 +6741,6 @@ int nand_scan_tail(struct mtd_info *mtd)
return ret;
}
-EXPORT_SYMBOL(nand_scan_tail);
static int nand_attach(struct nand_chip *chip)
{
@@ -6754,11 +6778,18 @@ int nand_scan_with_ids(struct mtd_info *mtd, int maxchips,
ret = nand_attach(chip);
if (ret)
- return ret;
+ goto cleanup_ident;
ret = nand_scan_tail(mtd);
if (ret)
- nand_detach(chip);
+ goto detach_chip;
+
+ return 0;
+
+detach_chip:
+ nand_detach(chip);
+cleanup_ident:
+ nand_scan_ident_cleanup(chip);
return ret;
}
@@ -6790,6 +6821,9 @@ void nand_cleanup(struct nand_chip *chip)
/* Free controller specific allocations after chip identification */
nand_detach(chip);
+
+ /* Free identification phase allocations */
+ nand_scan_ident_cleanup(chip);
}
EXPORT_SYMBOL_GPL(nand_cleanup);
diff --git a/include/linux/mtd/rawnand.h b/include/linux/mtd/rawnand.h
index a20c78e25878..5723d940a47d 100644
--- a/include/linux/mtd/rawnand.h
+++ b/include/linux/mtd/rawnand.h
@@ -36,14 +36,9 @@ static inline int nand_scan(struct mtd_info *mtd, int max_chips)
}
/*
- * Separate phases of nand_scan(), allowing board driver to intervene
- * and override command or ECC setup according to flash type.
+ * Unregister the MTD device and free resources held by the NAND device, must be
+ * called on error after a successful nand_scan().
*/
-int nand_scan_ident(struct mtd_info *mtd, int max_chips,
- struct nand_flash_dev *table);
-int nand_scan_tail(struct mtd_info *mtd);
-
-/* Unregister the MTD device and free resources held by the NAND device */
void nand_release(struct mtd_info *mtd);
/* Internal helper for board drivers which need to override command function */
@@ -487,7 +482,7 @@ struct onfi_params {
*/
struct nand_parameters {
/* Generic parameters */
- char model[100];
+ const char *model;
bool supports_set_get_features;
DECLARE_BITMAP(set_feature_list, ONFI_FEATURE_NUMBER);
DECLARE_BITMAP(get_feature_list, ONFI_FEATURE_NUMBER);
--
2.14.1
Powered by blists - more mailing lists