linux-kernel - [PATCH V1 2/3] Documentation: sdhci-msm: Add entries for passing load values

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <1532083566-43215-3-git-send-email-vviswana@codeaurora.org>
Date:   Fri, 20 Jul 2018 16:16:05 +0530
From:   Vijay Viswanath <vviswana@...eaurora.org>
To:     adrian.hunter@...el.com, ulf.hansson@...aro.org,
        robh+dt@...nel.org, mark.rutland@....com
Cc:     linux-mmc@...r.kernel.org, linux-kernel@...r.kernel.org,
        shawn.lin@...k-chips.com, linux-arm-msm@...r.kernel.org,
        georgi.djakov@...aro.org, devicetree@...r.kernel.org,
        asutoshd@...eaurora.org, stummala@...eaurora.org,
        venkatg@...eaurora.org, jeremymc@...hat.com,
        vviswana@...eaurora.org, bjorn.andersson@...aro.org,
        riteshh@...eaurora.org, vbadigan@...eaurora.org,
        evgreen@...omium.org, dianders@...gle.com, sayalil@...eaurora.org
Subject: [PATCH V1 2/3] Documentation: sdhci-msm: Add entries for passing load values

The load a particular sdhc controller should request from a regulator
is device specific and hence each device should individually vote for
the required load.

Signed-off-by: Vijay Viswanath <vviswana@...eaurora.org>
---
 Documentation/devicetree/bindings/mmc/sdhci-msm.txt | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/Documentation/devicetree/bindings/mmc/sdhci-msm.txt b/Documentation/devicetree/bindings/mmc/sdhci-msm.txt
index 502b3b8..ee34f28 100644
--- a/Documentation/devicetree/bindings/mmc/sdhci-msm.txt
+++ b/Documentation/devicetree/bindings/mmc/sdhci-msm.txt
@@ -26,6 +26,11 @@ Required properties:
 	"cal"	- reference clock for RCLK delay calibration (optional)
 	"sleep"	- sleep clock for RCLK delay calibration (optional)
 
+Optional properties:
+- <supply>-current-level - specifies load levels for supply during BUS_ON
+			and BUS_OFF states in power irq. Should be specified in
+			pairs (lpm, hpm), for BUS_OFF and BUS_ON respectively.
+			Units uA.
 Example:
 
 	sdhc_1: sdhci@...24900 {
@@ -37,6 +42,7 @@ Example:
 
 		vmmc-supply = <&pm8941_l20>;
 		vqmmc-supply = <&pm8941_s3>;
+		vqmmc-current-level = <200 22000>;
 
 		pinctrl-names = "default";
 		pinctrl-0 = <&sdc1_clk &sdc1_cmd &sdc1_data>;
-- 
 Qualcomm India Private Limited, on behalf of Qualcomm Innovation Center, Inc. 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, a Linux Foundation Collaborative Project.