| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20180720151527.16038-3-miquel.raynal@bootlin.com>
Date: Fri, 20 Jul 2018 17:14:54 +0200
From: Miquel Raynal <miquel.raynal@...tlin.com>
To: Wenyou Yang <wenyou.yang@...rochip.com>,
Josh Wu <rainyfeeling@...look.com>,
Tudor Ambarus <Tudor.Ambarus@...rochip.com>,
Boris Brezillon <boris.brezillon@...tlin.com>,
Miquel Raynal <miquel.raynal@...tlin.com>,
Richard Weinberger <richard@....at>,
David Woodhouse <dwmw2@...radead.org>,
Brian Norris <computersforpeace@...il.com>,
Marek Vasut <marek.vasut@...il.com>,
Nicolas Ferre <nicolas.ferre@...rochip.com>,
Alexandre Belloni <alexandre.belloni@...tlin.com>,
Kamal Dasu <kdasu.kdev@...il.com>,
Masahiro Yamada <yamada.masahiro@...ionext.com>,
Han Xu <han.xu@....com>,
Harvey Hunt <harveyhuntnexus@...il.com>,
Vladimir Zapolskiy <vz@...ia.com>,
Sylvain Lemieux <slemieux.tyco@...il.com>,
Xiaolei Li <xiaolei.li@...iatek.com>,
Matthias Brugger <matthias.bgg@...il.com>,
Maxime Ripard <maxime.ripard@...tlin.com>,
Chen-Yu Tsai <wens@...e.org>,
Marc Gonzalez <marc.w.gonzalez@...e.fr>,
Mans Rullgard <mans@...sr.com>, Stefan Agner <stefan@...er.ch>
Cc: linux-mtd@...ts.infradead.org,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
bcm-kernel-feedback-list@...adcom.com,
linux-mediatek@...ts.infradead.org
Subject: [PATCH v4 02/35] mtd: rawnand: cafe: convert driver to nand_scan()
Two helpers have been added to the core to make ECC-related
configuration between the detection phase and the final NAND scan. Use
these hooks and convert the driver to just use nand_scan() instead of
both nand_scan_ident() and nand_scan_tail().
Signed-off-by: Miquel Raynal <miquel.raynal@...tlin.com>
---
drivers/mtd/nand/raw/cafe_nand.c | 130 +++++++++++++++++++++++----------------
1 file changed, 76 insertions(+), 54 deletions(-)
diff --git a/drivers/mtd/nand/raw/cafe_nand.c b/drivers/mtd/nand/raw/cafe_nand.c
index ac0be933a490..c303c261dd8d 100644
--- a/drivers/mtd/nand/raw/cafe_nand.c
+++ b/drivers/mtd/nand/raw/cafe_nand.c
@@ -71,7 +71,9 @@ struct cafe_priv {
unsigned char *dmabuf;
};
-static int usedma = 1;
+#define CAFE_DEFAULT_DMA 1
+
+static int usedma = CAFE_DEFAULT_DMA;
module_param(usedma, int, 0644);
static int skipbbt = 0;
@@ -593,6 +595,76 @@ static int cafe_mul(int x)
return gf4096_mul(x, 0xe01);
}
+static int cafe_nand_attach_chip(struct nand_chip *chip)
+{
+ struct mtd_info *mtd = nand_to_mtd(chip);
+ struct cafe_priv *cafe = nand_get_controller_data(chip);
+ int err = 0;
+
+ cafe->dmabuf = dma_alloc_coherent(&cafe->pdev->dev, 2112,
+ &cafe->dmaaddr, GFP_KERNEL);
+ if (!cafe->dmabuf)
+ return -ENOMEM;
+
+ /* Set up DMA address */
+ cafe_writel(cafe, lower_32_bits(cafe->dmaaddr), NAND_DMA_ADDR0);
+ cafe_writel(cafe, upper_32_bits(cafe->dmaaddr), NAND_DMA_ADDR1);
+
+ cafe_dev_dbg(&cafe->pdev->dev, "Set DMA address to %x (virt %p)\n",
+ cafe_readl(cafe, NAND_DMA_ADDR0), cafe->dmabuf);
+
+ /* Restore the DMA flag */
+ usedma = CAFE_DEFAULT_DMA;
+
+ cafe->ctl2 = BIT(27); /* Reed-Solomon ECC */
+ if (mtd->writesize == 2048)
+ cafe->ctl2 |= BIT(29); /* 2KiB page size */
+
+ /* Set up ECC according to the type of chip we found */
+ mtd_set_ooblayout(mtd, &cafe_ooblayout_ops);
+ if (mtd->writesize == 2048) {
+ cafe->nand.bbt_td = &cafe_bbt_main_descr_2048;
+ cafe->nand.bbt_md = &cafe_bbt_mirror_descr_2048;
+ } else if (mtd->writesize == 512) {
+ cafe->nand.bbt_td = &cafe_bbt_main_descr_512;
+ cafe->nand.bbt_md = &cafe_bbt_mirror_descr_512;
+ } else {
+ dev_warn(&cafe->pdev->dev,
+ "Unexpected NAND flash writesize %d. Aborting\n",
+ mtd->writesize);
+ err = -ENOTSUPP;
+ goto out_free_dma;
+ }
+
+ cafe->nand.ecc.mode = NAND_ECC_HW_SYNDROME;
+ cafe->nand.ecc.size = mtd->writesize;
+ cafe->nand.ecc.bytes = 14;
+ cafe->nand.ecc.strength = 4;
+ cafe->nand.ecc.write_page = cafe_nand_write_page_lowlevel;
+ cafe->nand.ecc.write_oob = cafe_nand_write_oob;
+ cafe->nand.ecc.read_page = cafe_nand_read_page;
+ cafe->nand.ecc.read_oob = cafe_nand_read_oob;
+
+ return 0;
+
+ out_free_dma:
+ dma_free_coherent(&cafe->pdev->dev, 2112, cafe->dmabuf, cafe->dmaaddr);
+
+ return err;
+}
+
+static void cafe_nand_detach_chip(struct nand_chip *chip)
+{
+ struct cafe_priv *cafe = nand_get_controller_data(chip);
+
+ dma_free_coherent(&cafe->pdev->dev, 2112, cafe->dmabuf, cafe->dmaaddr);
+}
+
+static const struct nand_controller_ops cafe_nand_controller_ops = {
+ .attach_chip = cafe_nand_attach_chip,
+ .detach_chip = cafe_nand_detach_chip,
+};
+
static int cafe_nand_probe(struct pci_dev *pdev,
const struct pci_device_id *ent)
{
@@ -600,7 +672,6 @@ static int cafe_nand_probe(struct pci_dev *pdev,
struct cafe_priv *cafe;
uint32_t ctrl;
int err = 0;
- int old_dma;
/* Very old versions shared the same PCI ident for all three
functions on the chip. Verify the class too... */
@@ -708,62 +779,15 @@ static int cafe_nand_probe(struct pci_dev *pdev,
cafe_readl(cafe, GLOBAL_CTRL),
cafe_readl(cafe, GLOBAL_IRQ_MASK));
- /* Do not use the DMA for the nand_scan_ident() */
- old_dma = usedma;
+ /* Do not use the DMA during the NAND identification */
usedma = 0;
/* Scan to find existence of the device */
- err = nand_scan_ident(mtd, 2, NULL);
+ cafe->nand.dummy_controller.ops = &cafe_nand_controller_ops;
+ err = nand_scan(mtd, 2);
if (err)
goto out_irq;
- cafe->dmabuf = dma_alloc_coherent(&cafe->pdev->dev, 2112,
- &cafe->dmaaddr, GFP_KERNEL);
- if (!cafe->dmabuf) {
- err = -ENOMEM;
- goto out_irq;
- }
-
- /* Set up DMA address */
- cafe_writel(cafe, lower_32_bits(cafe->dmaaddr), NAND_DMA_ADDR0);
- cafe_writel(cafe, upper_32_bits(cafe->dmaaddr), NAND_DMA_ADDR1);
-
- cafe_dev_dbg(&cafe->pdev->dev, "Set DMA address to %x (virt %p)\n",
- cafe_readl(cafe, NAND_DMA_ADDR0), cafe->dmabuf);
-
- /* Restore the DMA flag */
- usedma = old_dma;
-
- cafe->ctl2 = 1<<27; /* Reed-Solomon ECC */
- if (mtd->writesize == 2048)
- cafe->ctl2 |= 1<<29; /* 2KiB page size */
-
- /* Set up ECC according to the type of chip we found */
- mtd_set_ooblayout(mtd, &cafe_ooblayout_ops);
- if (mtd->writesize == 2048) {
- cafe->nand.bbt_td = &cafe_bbt_main_descr_2048;
- cafe->nand.bbt_md = &cafe_bbt_mirror_descr_2048;
- } else if (mtd->writesize == 512) {
- cafe->nand.bbt_td = &cafe_bbt_main_descr_512;
- cafe->nand.bbt_md = &cafe_bbt_mirror_descr_512;
- } else {
- pr_warn("Unexpected NAND flash writesize %d. Aborting\n",
- mtd->writesize);
- goto out_free_dma;
- }
- cafe->nand.ecc.mode = NAND_ECC_HW_SYNDROME;
- cafe->nand.ecc.size = mtd->writesize;
- cafe->nand.ecc.bytes = 14;
- cafe->nand.ecc.strength = 4;
- cafe->nand.ecc.write_page = cafe_nand_write_page_lowlevel;
- cafe->nand.ecc.write_oob = cafe_nand_write_oob;
- cafe->nand.ecc.read_page = cafe_nand_read_page;
- cafe->nand.ecc.read_oob = cafe_nand_read_oob;
-
- err = nand_scan_tail(mtd);
- if (err)
- goto out_free_dma;
-
pci_set_drvdata(pdev, mtd);
mtd->name = "cafe_nand";
@@ -775,8 +799,6 @@ static int cafe_nand_probe(struct pci_dev *pdev,
out_cleanup_nand:
nand_cleanup(&cafe->nand);
- out_free_dma:
- dma_free_coherent(&cafe->pdev->dev, 2112, cafe->dmabuf, cafe->dmaaddr);
out_irq:
/* Disable NAND IRQ in global IRQ mask register */
cafe_writel(cafe, ~1 & cafe_readl(cafe, GLOBAL_IRQ_MASK), GLOBAL_IRQ_MASK);
--
2.14.1
Powered by blists - more mailing lists