| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Fri, 20 Jul 2018 17:15:11 +0200
From: Miquel Raynal <miquel.raynal@...tlin.com>
To: Wenyou Yang <wenyou.yang@...rochip.com>,
Josh Wu <rainyfeeling@...look.com>,
Tudor Ambarus <Tudor.Ambarus@...rochip.com>,
Boris Brezillon <boris.brezillon@...tlin.com>,
Miquel Raynal <miquel.raynal@...tlin.com>,
Richard Weinberger <richard@....at>,
David Woodhouse <dwmw2@...radead.org>,
Brian Norris <computersforpeace@...il.com>,
Marek Vasut <marek.vasut@...il.com>,
Nicolas Ferre <nicolas.ferre@...rochip.com>,
Alexandre Belloni <alexandre.belloni@...tlin.com>,
Kamal Dasu <kdasu.kdev@...il.com>,
Masahiro Yamada <yamada.masahiro@...ionext.com>,
Han Xu <han.xu@....com>,
Harvey Hunt <harveyhuntnexus@...il.com>,
Vladimir Zapolskiy <vz@...ia.com>,
Sylvain Lemieux <slemieux.tyco@...il.com>,
Xiaolei Li <xiaolei.li@...iatek.com>,
Matthias Brugger <matthias.bgg@...il.com>,
Maxime Ripard <maxime.ripard@...tlin.com>,
Chen-Yu Tsai <wens@...e.org>,
Marc Gonzalez <marc.w.gonzalez@...e.fr>,
Mans Rullgard <mans@...sr.com>, Stefan Agner <stefan@...er.ch>
Cc: linux-mtd@...ts.infradead.org,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
bcm-kernel-feedback-list@...adcom.com,
linux-mediatek@...ts.infradead.org
Subject: [PATCH v4 19/35] mtd: rawnand: sh_flctl: move all NAND chip related setup in one function
Prepare the conversion of the sh_flctl driver to nand_scan() by moving
all the configuration that must be made after nand_scan_ident() in one
single function. Create a pdata entry in the controller structure for
that.
Signed-off-by: Miquel Raynal <miquel.raynal@...tlin.com>
---
drivers/mtd/nand/raw/sh_flctl.c | 38 +++++++++++++++++++-------------------
include/linux/mtd/sh_flctl.h | 1 +
2 files changed, 20 insertions(+), 19 deletions(-)
diff --git a/drivers/mtd/nand/raw/sh_flctl.c b/drivers/mtd/nand/raw/sh_flctl.c
index c7abceffcc40..d37d1d3ccbf9 100644
--- a/drivers/mtd/nand/raw/sh_flctl.c
+++ b/drivers/mtd/nand/raw/sh_flctl.c
@@ -1007,6 +1007,16 @@ static int flctl_chip_init_tail(struct mtd_info *mtd)
struct sh_flctl *flctl = mtd_to_flctl(mtd);
struct nand_chip *chip = &flctl->chip;
+ if (chip->options & NAND_BUSWIDTH_16) {
+ /*
+ * NAND_BUSWIDTH_16 may have been set by nand_scan_ident().
+ * Add the SEL_16BIT flag in pdata->flcmncr_val and re-assign
+ * flctl->flcmncr_base to pdata->flcmncr_val.
+ */
+ flctl->pdata->flcmncr_val |= SEL_16BIT;
+ flctl->flcmncr_base = flctl->pdata->flcmncr_val;
+ }
+
if (mtd->writesize == 512) {
flctl->page_size = 0;
if (chip->chipsize > (32 << 20)) {
@@ -1122,7 +1132,6 @@ static int flctl_probe(struct platform_device *pdev)
struct sh_flctl *flctl;
struct mtd_info *flctl_mtd;
struct nand_chip *nand;
- struct sh_flctl_platform_data *pdata;
int ret;
int irq;
@@ -1150,11 +1159,11 @@ static int flctl_probe(struct platform_device *pdev)
}
if (pdev->dev.of_node)
- pdata = flctl_parse_dt(&pdev->dev);
+ flctl->pdata = flctl_parse_dt(&pdev->dev);
else
- pdata = dev_get_platdata(&pdev->dev);
+ flctl->pdata = dev_get_platdata(&pdev->dev);
- if (!pdata) {
+ if (!flctl->pdata) {
dev_err(&pdev->dev, "no setup data defined\n");
return -EINVAL;
}
@@ -1165,9 +1174,9 @@ static int flctl_probe(struct platform_device *pdev)
nand_set_flash_node(nand, pdev->dev.of_node);
flctl_mtd->dev.parent = &pdev->dev;
flctl->pdev = pdev;
- flctl->hwecc = pdata->has_hwecc;
- flctl->holden = pdata->use_holden;
- flctl->flcmncr_base = pdata->flcmncr_val;
+ flctl->hwecc = flctl->pdata->has_hwecc;
+ flctl->holden = flctl->pdata->use_holden;
+ flctl->flcmncr_base = flctl->pdata->flcmncr_val;
flctl->flintdmacr_base = flctl->hwecc ? (STERINTE | ECERB) : STERINTE;
/* Set address of hardware control function */
@@ -1183,7 +1192,7 @@ static int flctl_probe(struct platform_device *pdev)
nand->set_features = nand_get_set_features_notsupp;
nand->get_features = nand_get_set_features_notsupp;
- if (pdata->flcmncr_val & SEL_16BIT)
+ if (flctl->pdata->flcmncr_val & SEL_16BIT)
nand->options |= NAND_BUSWIDTH_16;
pm_runtime_enable(&pdev->dev);
@@ -1195,16 +1204,6 @@ static int flctl_probe(struct platform_device *pdev)
if (ret)
goto err_chip;
- if (nand->options & NAND_BUSWIDTH_16) {
- /*
- * NAND_BUSWIDTH_16 may have been set by nand_scan_ident().
- * Add the SEL_16BIT flag in pdata->flcmncr_val and re-assign
- * flctl->flcmncr_base to pdata->flcmncr_val.
- */
- pdata->flcmncr_val |= SEL_16BIT;
- flctl->flcmncr_base = pdata->flcmncr_val;
- }
-
ret = flctl_chip_init_tail(flctl_mtd);
if (ret)
goto err_chip;
@@ -1213,7 +1212,8 @@ static int flctl_probe(struct platform_device *pdev)
if (ret)
goto err_chip;
- ret = mtd_device_register(flctl_mtd, pdata->parts, pdata->nr_parts);
+ ret = mtd_device_register(flctl_mtd, flctl->pdata->parts,
+ flctl->pdata->nr_parts);
if (ret)
goto cleanup_nand;
diff --git a/include/linux/mtd/sh_flctl.h b/include/linux/mtd/sh_flctl.h
index c759d403cbc0..c9f486c6c019 100644
--- a/include/linux/mtd/sh_flctl.h
+++ b/include/linux/mtd/sh_flctl.h
@@ -148,6 +148,7 @@ struct sh_flctl {
struct dev_pm_qos_request pm_qos;
void __iomem *reg;
resource_size_t fifo;
+ struct sh_flctl_platform_data *pdata;
uint8_t done_buff[2048 + 64]; /* max size 2048 + 64 */
int read_bytes;
--
2.14.1
Powered by blists - more mailing lists