[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20180721125128.31498-2-simon@lineageos.org>
Date: Sat, 21 Jul 2018 22:50:49 +1000
From: Simon Shields <simon@...eageos.org>
To: linux-samsung-soc@...r.kernel.org
Cc: Simon Shields <simon@...eageos.org>,
Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Kukjin Kim <kgene@...nel.org>,
Krzysztof Kozlowski <krzk@...nel.org>,
devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-kernel@...r.kernel.org
Subject: [PATCH 1/5] ARM: dts: exynos: add max77693 pinctrl config for midas
Currently, we assume that the bootloader has correctly configured
the interrupt pin for max77693. This might not actually be the case -
so it's better to configure it explicitly.
Signed-off-by: Simon Shields <simon@...eageos.org>
---
arch/arm/boot/dts/exynos4412-midas.dtsi | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/arch/arm/boot/dts/exynos4412-midas.dtsi b/arch/arm/boot/dts/exynos4412-midas.dtsi
index f12372509061..ee7cda1432f7 100644
--- a/arch/arm/boot/dts/exynos4412-midas.dtsi
+++ b/arch/arm/boot/dts/exynos4412-midas.dtsi
@@ -156,6 +156,8 @@
compatible = "maxim,max77693";
interrupt-parent = <&gpx1>;
interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&max77693_irq>;
reg = <0x66>;
regulators {
@@ -1124,6 +1126,11 @@
pinctrl-names = "default";
pinctrl-0 = <&sleep1>;
+ max77693_irq: max77693-irq {
+ samsung,pins = "gpx1-5";
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
hdmi_hpd: hdmi-hpd {
samsung,pins = "gpx3-7";
samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
--
2.18.0
Powered by blists - more mailing lists