Message-Id: <20180723055959eucas1p15a381f2a1287a28e4f78f1fb5fc8e37d~D6gOgxXLK0412704127eucas1p1R@eucas1p1.samsung.com>
Date:   Mon, 23 Jul 2018 07:59:57 +0200
From:   Marek Szyprowski <m.szyprowski@...sung.com>
To:     "Rafael J. Wysocki" <rafael@...nel.org>
Cc:     Tomasz Figa <tfiga@...omium.org>,
        Vivek Gautam <vivek.gautam@...eaurora.org>,
        "Rafael J. Wysocki" <rjw@...ysocki.net>,
        "list@....net:IOMMU DRIVERS" <iommu@...ts.linux-foundation.org>,
        Joerg Roedel <joro@...tes.org>,
        Rob Herring <robh+dt@...nel.org>,
        Mark Rutland <mark.rutland@....com>,
        Robin Murphy <robin.murphy@....com>,
        Will Deacon <will.deacon@....com>,
        "devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
        Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
        Alex Williamson <alex.williamson@...hat.com>,
        Rob Clark <robdclark@...il.com>,
        Linux PM <linux-pm@...r.kernel.org>,
        freedreno <freedreno@...ts.freedesktop.org>,
        Stephen Boyd <sboyd@...nel.org>,
        Sricharan R <sricharan@...eaurora.org>,
        Archit Taneja <architt@...eaurora.org>,
        linux-arm-msm <linux-arm-msm@...r.kernel.org>,
        Jordan Crouse <jcrouse@...eaurora.org>
Subject: Re: [PATCH v12 1/4] iommu/arm-smmu: Add pm_runtime/sleep ops

Hi Rafael,

On 2018-07-11 22:36, Rafael J. Wysocki wrote:
> On Wed, Jul 11, 2018 at 3:40 PM, Marek Szyprowski
> <m.szyprowski@...sung.com> wrote:
>> Hi Tomasz,
>>
>> On 2018-07-11 14:51, Tomasz Figa wrote:
>>> On Wed, Jul 11, 2018 at 8:11 PM Rafael J. Wysocki <rafael@...nel.org> wrote:
>>>> On Wed, Jul 11, 2018 at 12:55 PM, Vivek Gautam
>>>> <vivek.gautam@...eaurora.org> wrote:
>>>>> On Wed, Jul 11, 2018 at 3:20 PM, Rafael J. Wysocki <rjw@...ysocki.net> wrote:
>>>>>> On Sunday, July 8, 2018 7:34:10 PM CEST Vivek Gautam wrote:
>>>>>>> From: Sricharan R <sricharan@...eaurora.org>
>>>>>>>
>>>>>>> The smmu needs to be functional only when the respective
>>>>>>> master's using it are active. The device_link feature
>>>>>>> helps to track such functional dependencies, so that the
>>>>>>> iommu gets powered when the master device enables itself
>>>>>>> using pm_runtime. So by adapting the smmu driver for
>>>>>>> runtime pm, above said dependency can be addressed.
>>>>>>>
>>>>>>> This patch adds the pm runtime/sleep callbacks to the
>>>>>>> driver and also the functions to parse the smmu clocks
>>>>>>> from DT and enable them in resume/suspend.
>>>>>>>
>>>>>>> Signed-off-by: Sricharan R <sricharan@...eaurora.org>
>>>>>>> Signed-off-by: Archit Taneja <architt@...eaurora.org>
>>>>>>> [vivek: Clock rework to request bulk of clocks]
>>>>>>> Signed-off-by: Vivek Gautam <vivek.gautam@...eaurora.org>
>>>>>>> Reviewed-by: Tomasz Figa <tfiga@...omium.org>
>>>>>>> ---
>>>>>>>
>>>>>>>    - No change since v11.
>>>>>>>
>>>>>>>    drivers/iommu/arm-smmu.c | 60 ++++++++++++++++++++++++++++++++++++++++++++++--
>>>>>>>    1 file changed, 58 insertions(+), 2 deletions(-)
>>>>>>>
>>>>>>> diff --git a/drivers/iommu/arm-smmu.c b/drivers/iommu/arm-smmu.c
>>>>>>> index f7a96bcf94a6..a01d0dde21dd 100644
>>>>>>> --- a/drivers/iommu/arm-smmu.c
>>>>>>> +++ b/drivers/iommu/arm-smmu.c
>>>>>>> @@ -48,6 +48,7 @@
>>>>>>>    #include <linux/of_iommu.h>
>>>>>>>    #include <linux/pci.h>
>>>>>>>    #include <linux/platform_device.h>
>>>>>>> +#include <linux/pm_runtime.h>
>>>>>>>    #include <linux/slab.h>
>>>>>>>    #include <linux/spinlock.h>
>>>>>>>
>>>>>>> @@ -205,6 +206,8 @@ struct arm_smmu_device {
>>>>>>>         u32                             num_global_irqs;
>>>>>>>         u32                             num_context_irqs;
>>>>>>>         unsigned int                    *irqs;
>>>>>>> +     struct clk_bulk_data            *clks;
>>>>>>> +     int                             num_clks;
>>>>>>>
>>>>>>>         u32                             cavium_id_base; /* Specific to Cavium */
>>>>>>>
>>>>>>> @@ -1897,10 +1900,12 @@ static int arm_smmu_device_cfg_probe(struct arm_smmu_device *smmu)
>>>>>>>    struct arm_smmu_match_data {
>>>>>>>         enum arm_smmu_arch_version version;
>>>>>>>         enum arm_smmu_implementation model;
>>>>>>> +     const char * const *clks;
>>>>>>> +     int num_clks;
>>>>>>>    };
>>>>>>>
>>>>>>>    #define ARM_SMMU_MATCH_DATA(name, ver, imp)  \
>>>>>>> -static struct arm_smmu_match_data name = { .version = ver, .model = imp }
>>>>>>> +static const struct arm_smmu_match_data name = { .version = ver, .model = imp }
>>>>>>>
>>>>>>>    ARM_SMMU_MATCH_DATA(smmu_generic_v1, ARM_SMMU_V1, GENERIC_SMMU);
>>>>>>>    ARM_SMMU_MATCH_DATA(smmu_generic_v2, ARM_SMMU_V2, GENERIC_SMMU);
>>>>>>> @@ -1919,6 +1924,23 @@ static const struct of_device_id arm_smmu_of_match[] = {
>>>>>>>    };
>>>>>>>    MODULE_DEVICE_TABLE(of, arm_smmu_of_match);
>>>>>>>
>>>>>>> +static void arm_smmu_fill_clk_data(struct arm_smmu_device *smmu,
>>>>>>> +                                const char * const *clks)
>>>>>>> +{
>>>>>>> +     int i;
>>>>>>> +
>>>>>>> +     if (smmu->num_clks < 1)
>>>>>>> +             return;
>>>>>>> +
>>>>>>> +     smmu->clks = devm_kcalloc(smmu->dev, smmu->num_clks,
>>>>>>> +                               sizeof(*smmu->clks), GFP_KERNEL);
>>>>>>> +     if (!smmu->clks)
>>>>>>> +             return;
>>>>>>> +
>>>>>>> +     for (i = 0; i < smmu->num_clks; i++)
>>>>>>> +             smmu->clks[i].id = clks[i];
>>>>>>> +}
>>>>>>> +
>>>>>>>    #ifdef CONFIG_ACPI
>>>>>>>    static int acpi_smmu_get_data(u32 model, struct arm_smmu_device *smmu)
>>>>>>>    {
>>>>>>> @@ -2001,6 +2023,9 @@ static int arm_smmu_device_dt_probe(struct platform_device *pdev,
>>>>>>>         data = of_device_get_match_data(dev);
>>>>>>>         smmu->version = data->version;
>>>>>>>         smmu->model = data->model;
>>>>>>> +     smmu->num_clks = data->num_clks;
>>>>>>> +
>>>>>>> +     arm_smmu_fill_clk_data(smmu, data->clks);
>>>>>>>
>>>>>>>         parse_driver_options(smmu);
>>>>>>>
>>>>>>> @@ -2099,6 +2124,14 @@ static int arm_smmu_device_probe(struct platform_device *pdev)
>>>>>>>                 smmu->irqs[i] = irq;
>>>>>>>         }
>>>>>>>
>>>>>>> +     err = devm_clk_bulk_get(smmu->dev, smmu->num_clks, smmu->clks);
>>>>>>> +     if (err)
>>>>>>> +             return err;
>>>>>>> +
>>>>>>> +     err = clk_bulk_prepare(smmu->num_clks, smmu->clks);
>>>>>>> +     if (err)
>>>>>>> +             return err;
>>>>>>> +
>>>>>>>         err = arm_smmu_device_cfg_probe(smmu);
>>>>>>>         if (err)
>>>>>>>                 return err;
>>>>>>> @@ -2181,6 +2214,9 @@ static int arm_smmu_device_remove(struct platform_device *pdev)
>>>>>>>
>>>>>>>         /* Turn the thing off */
>>>>>>>         writel(sCR0_CLIENTPD, ARM_SMMU_GR0_NS(smmu) + ARM_SMMU_GR0_sCR0);
>>>>>>> +
>>>>>>> +     clk_bulk_unprepare(smmu->num_clks, smmu->clks);
>>>>>>> +
>>>>>>>         return 0;
>>>>>>>    }
>>>>>>>
>>>>>>> @@ -2197,7 +2233,27 @@ static int __maybe_unused arm_smmu_pm_resume(struct device *dev)
>>>>>>>         return 0;
>>>>>>>    }
>>>>>>>
>>>>>>> -static SIMPLE_DEV_PM_OPS(arm_smmu_pm_ops, NULL, arm_smmu_pm_resume);
>>>>>>> +static int __maybe_unused arm_smmu_runtime_resume(struct device *dev)
>>>>>>> +{
>>>>>>> +     struct arm_smmu_device *smmu = dev_get_drvdata(dev);
>>>>>>> +
>>>>>>> +     return clk_bulk_enable(smmu->num_clks, smmu->clks);
>>>>>>> +}
>>>>>>> +
>>>>>>> +static int __maybe_unused arm_smmu_runtime_suspend(struct device *dev)
>>>>>>> +{
>>>>>>> +     struct arm_smmu_device *smmu = dev_get_drvdata(dev);
>>>>>>> +
>>>>>>> +     clk_bulk_disable(smmu->num_clks, smmu->clks);
>>>>>>> +
>>>>>>> +     return 0;
>>>>>>> +}
>>>>>>> +
>>>>>>> +static const struct dev_pm_ops arm_smmu_pm_ops = {
>>>>>>> +     SET_SYSTEM_SLEEP_PM_OPS(NULL, arm_smmu_pm_resume)
>>>>>> This is suspicious.
>>>>>>
>>>>>> If you need a runtime suspend method, why do you think that it is not necessary
>>>>>> to suspend the device during system-wide transitions?
>>>>> Okay, so you suggest to put clock disabling in say arm_smmu_pm_suspend()?
>>>>> In that case the clocks have to be enabled in the resume path too.
>>>>>
>>>>> I remember Tomasz pointed to that we shouldn't need clock enable in resume
>>>>> path [1].
>>>>>
>>>>> [1] https://lkml.org/lkml/2018/3/15/60
>>> That was an answer for a different question. I don't remember
>>> suggesting having no suspend function. Although, given the PM
>>> subsystem internals, the suspend function wouldn't be called on SMMU
>>> implementation needed power control (since they would have runtime PM
>>> enabled) and on others, it would be called but do nothing (since no
>>> clocks).
>>>
>>>> Honestly, I just don't know. :-)
>>>>
>>>> It just looks odd the way it is done.  I think the clock should be
>>>> gated during system-wide suspend too, because the system can spend
>>>> much more time in a sleep state than in the working state, on average.
>>>>
>>>> And note that you cannot rely on runtime PM to always do it for you,
>>>> because it may be disabled at a client device or even blocked by user
>>>> space via power/control in sysfs and that shouldn't matter for
>>>> system-wide PM.
>>> User space blocking runtime PM through sysfs is a good point. I'm not
>>> 100% sure how the PM subsystem deals with that in case of system-wide
>>> suspend. I guess for consistency and safety, we should have the
>>> suspend callback.
>> Frankly, if there are no other reasons I suggest to wire system
>> suspend/resume to pm_runtime_force_* helpers:
>> SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
>>                           pm_runtime_force_resume).
> Not a good idea at all IMO.
>
> Use PM driver flags rather I'd say.

Frankly, till now I wasn't aware of the DPM_FLAG_* in struct dev_pm_info
'driver_flags'. I've briefly checked them but I don't see the equivalent
of using SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
pm_runtime_force_resume): keep device suspend if it was runtime suspended
AND really call pm_runtime_suspend if it was not runtime suspended on
system suspend.

>> This way you will have everything related to suspending and resuming in
>> one place and you would not need to bother about all possible cases (like
>> suspending from runtime pm active and suspending from runtime pm suspended
>> cases as well as restoring proper device state on resume). This is
>> especially important in recent kernel releases, where devices are
>> system-suspended regardless their runtime pm states (in older kernels
>> devices were first runtime resumed for system suspend, what made code
>> simpler, but wasn't best from power consumption perspective).
>>
>> If you go this way, You only need to ensure that runtime resume will also
>> restore proper device state besides enabling all the clocks. This will
>> also prepare your driver to properly operate inside power domain, where it
>> is possible for device to loose its internal state after runtime suspend
>> when respective power domain has been turned off.
> I'm not sure if you are aware of the pm_runtime_force_* limitations, though.

What are those limitations?

Best regards
-- 
Marek Szyprowski, PhD
Samsung R&D Institute Poland

Powered by blists - more mailing lists