linux-kernel - Re: [PATCH 2/2] PCI: NVMe device specific reset quirk

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20180723224507.GA11656@localhost.localdomain>
Date:   Mon, 23 Jul 2018 16:45:08 -0600
From:   Keith Busch <keith.busch@...el.com>
To:     Alex Williamson <alex.williamson@...hat.com>
Cc:     linux-pci@...r.kernel.org, linux-kernel@...r.kernel.org,
        linux-nvme@...ts.infradead.org
Subject: Re: [PATCH 2/2] PCI: NVMe device specific reset quirk

On Mon, Jul 23, 2018 at 04:24:31PM -0600, Alex Williamson wrote:
> Take advantage of NVMe devices using a standard interface to quiesce
> the controller prior to reset, including device specific delays before
> and after that reset.  This resolves several NVMe device assignment
> scenarios with two different vendors.  The Intel DC P3700 controller
> has been shown to only work as a VM boot device on the initial VM
> startup, failing after reset or reboot, and also fails to initialize
> after hot-plug into a VM.  Adding a delay after FLR resolves these
> cases.  The Samsung SM961/PM961 (960 EVO) sometimes fails to return
> from FLR with the PCI config space reading back as -1.  A reproducible
> instance of this behavior is resolved by clearing the enable bit in
> the configuration register and waiting for the ready status to clear
> (disabling the NVMe controller) prior to FLR.
> 
> As all NVMe devices make use of this standard interface and the NVMe
> specification also requires PCIe FLR support, we can apply this quirk
> to all devices with matching class code.

Shouldn't this go in the nvme driver's reset_prepare/reset_done callbacks?