| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1532341959-3478-4-git-send-email-pengbo.mu@nxp.com>
Date: Mon, 23 Jul 2018 18:32:39 +0800
From: Pengbo Mu <pengbo.mu@....com>
To: Felipe Balbi <balbi@...nel.org>, Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Catalin Marinas <catalin.marinas@....com>,
Will Deacon <will.deacon@....com>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>
Cc: linux-kernel@...r.kernel.org, linux-usb@...r.kernel.org,
devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
ran.wang_1@....com, pengbo.mu@....com
Subject: [PATCH v6 4/4] arm: arm64: dts: add property snps incr burst type adjustment
Property "snps,incr-burst-type-adjustment = <x>, <y>..." for USB3.0
DWC3.When only one value means INCRx mode with fix burst type.
When more than one value, means undefined length burst mode, USB
controller can use the length less than or equal to the largest
enabled burst length.
While enabling undefined length INCR burst type and INCR16 burst type,
get better write performance on NXP Layerscape platforms: around 3%
improvement (from 364MB/s to 375MB/s).
Signed-off-by: Ran Wang <ran.wang_1@....com>
Signed-off-by: Pengbo Mu <pengbo.mu@....com>
---
Changes in v6:
- delete snps,incr-burst-type-adjustment = <1>
Changes in v5:
- add support for ls1021a, ls1012a, ls1046a, ls1088a, ls1021a
- update ls208xa support according to code base change
Changes in v4:
- change definition for this property.
Changes in v3:
- add new property for INCR burst in usb node.
---
arch/arm/boot/dts/ls1021a.dtsi | 1 +
arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi | 1 +
arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 3 +++
arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi | 3 +++
arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi | 2 ++
arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi | 2 ++
6 files changed, 12 insertions(+)
diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi
index c55d479..7c328f3 100644
--- a/arch/arm/boot/dts/ls1021a.dtsi
+++ b/arch/arm/boot/dts/ls1021a.dtsi
@@ -706,6 +706,7 @@
dr_mode = "host";
snps,quirk-frame-length-adjustment = <0x20>;
snps,dis_rxdet_inp3_quirk;
+ snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
};
pcie@...0000 {
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
index 205f0f4..8e3d66f 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
@@ -482,6 +482,7 @@
dr_mode = "host";
snps,quirk-frame-length-adjustment = <0x20>;
snps,dis_rxdet_inp3_quirk;
+ snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
};
sata: sata@...0000 {
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
index 1109f22..f826d20 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
@@ -643,6 +643,7 @@
dr_mode = "host";
snps,quirk-frame-length-adjustment = <0x20>;
snps,dis_rxdet_inp3_quirk;
+ snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
};
usb1: usb3@...0000 {
@@ -652,6 +653,7 @@
dr_mode = "host";
snps,quirk-frame-length-adjustment = <0x20>;
snps,dis_rxdet_inp3_quirk;
+ snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
};
usb2: usb3@...0000 {
@@ -661,6 +663,7 @@
dr_mode = "host";
snps,quirk-frame-length-adjustment = <0x20>;
snps,dis_rxdet_inp3_quirk;
+ snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
};
sata: sata@...0000 {
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
index 136ebfa..9226be8 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
@@ -604,6 +604,7 @@
dr_mode = "host";
snps,quirk-frame-length-adjustment = <0x20>;
snps,dis_rxdet_inp3_quirk;
+ snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
};
usb1: usb@...0000 {
@@ -613,6 +614,7 @@
dr_mode = "host";
snps,quirk-frame-length-adjustment = <0x20>;
snps,dis_rxdet_inp3_quirk;
+ snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
};
usb2: usb@...0000 {
@@ -622,6 +624,7 @@
dr_mode = "host";
snps,quirk-frame-length-adjustment = <0x20>;
snps,dis_rxdet_inp3_quirk;
+ snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
};
sata: sata@...0000 {
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
index 1c6556b..34671ee0 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
@@ -479,6 +479,7 @@
snps,quirk-frame-length-adjustment = <0x20>;
snps,dis_rxdet_inp3_quirk;
status = "disabled";
+ snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
};
usb1: usb3@...0000 {
@@ -489,6 +490,7 @@
snps,quirk-frame-length-adjustment = <0x20>;
snps,dis_rxdet_inp3_quirk;
status = "disabled";
+ snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
};
sata: sata@...0000 {
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
index 137ef4d..c0762cc 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
@@ -754,6 +754,7 @@
dr_mode = "host";
snps,quirk-frame-length-adjustment = <0x20>;
snps,dis_rxdet_inp3_quirk;
+ snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
};
usb1: usb3@...0000 {
@@ -764,6 +765,7 @@
dr_mode = "host";
snps,quirk-frame-length-adjustment = <0x20>;
snps,dis_rxdet_inp3_quirk;
+ snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
};
ccn@...0000 {
--
2.7.4
Powered by blists - more mailing lists