lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date:   Tue, 24 Jul 2018 09:15:51 +0800
From:   Icenowy Zheng <icenowy@...c.io>
To:     Maxime Ripard <maxime.ripard@...tlin.com>,
        Chen-Yu Tsai <wens@...e.org>
Cc:     linux-arm-kernel@...ts.infradead.org, devicetree@...r.kernel.org,
        linux-kernel@...r.kernel.org, linux-sunxi@...glegroups.com,
        Icenowy Zheng <icenowy@...c.io>
Subject: [PATCH 3/3] arm64: allwinner: dts: h6: add Wi-Fi support for Pine H64 model A/B

The Pine H64 model A has a Wi-Fi module connector and the model B has an
on-board RTL8723BS Wi-Fi module.

Add support for them. For model A, as it's not defaultly present, keep
it disabled now.

Signed-off-by: Icenowy Zheng <icenowy@...c.io>
---
 .../allwinner/sun50i-h6-pine-h64-model-b.dts  |  8 +++++
 .../boot/dts/allwinner/sun50i-h6-pine-h64.dts | 29 +++++++++++++++++++
 2 files changed, 37 insertions(+)

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64-model-b.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64-model-b.dts
index d0fcc25efb00..d0f775613c9b 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64-model-b.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64-model-b.dts
@@ -18,3 +18,11 @@
 		};
 	};
 };
+
+&mmc1 {
+	status = "okay";
+};
+
+&wifi_pwrseq {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts
index a85867f8b684..75db6d4139bf 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts
@@ -40,6 +40,12 @@
 			gpios = <&r_pio 0 7 GPIO_ACTIVE_HIGH>; /* PL7 */
 		};
 	};
+
+	wifi_pwrseq: wifi_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&r_pio 1 3 GPIO_ACTIVE_LOW>; /* PL2 */
+		status = "disabled";
+	};
 };
 
 &mmc0 {
@@ -50,6 +56,17 @@
 	status = "okay";
 };
 
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	vmmc-supply = <&reg_cldo2>;
+	vqmmc-supply = <&reg_bldo2>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "disabled";
+};
+
 &mmc2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc2_pins>;
@@ -128,12 +145,24 @@
 			};
 
 			reg_cldo2: cldo2 {
+				/*
+				 * This regulator is connected with CLDO3.
+				 * Before the kernel can support synchronized
+				 * enable of coupled regulators, keep them
+				 * both always on as a ugly hack.
+				 */
+				regulator-always-on;
 				regulator-min-microvolt = <3300000>;
 				regulator-max-microvolt = <3300000>;
 				regulator-name = "vcc-wifi-1";
 			};
 
 			reg_cldo3: cldo3 {
+				/*
+				 * This regulator is connected with CLDO2.
+				 * See the comments for CLDO2.
+				 */
+				regulator-always-on;
 				regulator-min-microvolt = <3300000>;
 				regulator-max-microvolt = <3300000>;
 				regulator-name = "vcc-wifi-2";
-- 
2.18.0

Powered by blists - more mailing lists