[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <1532451152.32306.8.camel@pengutronix.de>
Date: Tue, 24 Jul 2018 18:52:32 +0200
From: Lucas Stach <l.stach@...gutronix.de>
To: Leonard Crestez <leonard.crestez@....com>,
Andrey Smirnov <andrew.smirnov@...il.com>,
Richard Zhu <hongxing.zhu@....com>,
Shawn Guo <shawnguo@...nel.org>
Cc: Anson Huang <Anson.Huang@....com>,
Philipp Zabel <p.zabel@...gutronix.de>,
Bjorn Helgaas <bhelgaas@...gle.com>,
Jingoo Han <jingoohan1@...il.com>,
Joao Pinto <Joao.Pinto@...opsys.com>,
Lorenzo Pieralisi <lorenzo.pieralisi@....com>,
Fabio Estevam <fabio.estevam@....com>,
Dong Aisheng <aisheng.dong@....com>, linux-imx@....com,
kernel@...gutronix.de, linux-pci@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH v3 1/2] Revert "ARM: dts: imx7d: Invert legacy PCI irq
mapping"
Am Dienstag, den 24.07.2018, 19:14 +0300 schrieb Leonard Crestez:
> This reverts commit 1c86c9dd82f859b474474a7fee0d5195da2c9c1d.
>
> That commit followed the reference manual but unfortunately the imx7d
> manual is incorrect.
>
> Tested with ath9k pcie card and confirmed internally.
>
> Signed-off-by: Leonard Crestez <leonard.crestez@....com>
Acked-by: Lucas Stach <l.stach@...gutronix.de>
> ---
> arch/arm/boot/dts/imx7d.dtsi | 12 ++++++++----
> 1 file changed, 8 insertions(+), 4 deletions(-)
>
> diff --git a/arch/arm/boot/dts/imx7d.dtsi b/arch/arm/boot/dts/imx7d.dtsi
> index 7cbc2ffa4b3a..7234e8330a57 100644
> --- a/arch/arm/boot/dts/imx7d.dtsi
> +++ b/arch/arm/boot/dts/imx7d.dtsi
> @@ -124,14 +124,18 @@
> > num-lanes = <1>;
> > interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
> > interrupt-names = "msi";
> > #interrupt-cells = <1>;
> > interrupt-map-mask = <0 0 0 0x7>;
> > - interrupt-map = <0 0 0 1 &intc GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
> > - <0 0 0 2 &intc GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
> > - <0 0 0 3 &intc GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
> > - <0 0 0 4 &intc GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
> > + /*
> > + * Reference manual lists pci irqs incorrectly
> > + * Real hardware ordering is same as imx6: D+MSI, C, B, A
> > + */
> > + interrupt-map = <0 0 0 1 &intc GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
> > + <0 0 0 2 &intc GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
> > + <0 0 0 3 &intc GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
> > + <0 0 0 4 &intc GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
> > clocks = <&clks IMX7D_PCIE_CTRL_ROOT_CLK>,
> > <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>,
> > <&clks IMX7D_PCIE_PHY_ROOT_CLK>;
> > clock-names = "pcie", "pcie_bus", "pcie_phy";
> > assigned-clocks = <&clks IMX7D_PCIE_CTRL_ROOT_SRC>,
Powered by blists - more mailing lists