[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <ea448f034b5061ab6731ee00fc798c68825b6c9c.1532501910.git.hns@goldelico.com>
Date: Wed, 25 Jul 2018 08:58:37 +0200
From: "H. Nikolaus Schaller" <hns@...delico.com>
To: Marek Belisko <marek@...delico.com>,
BenoƮt Cousson <bcousson@...libre.com>,
Tony Lindgren <tony@...mide.com>,
Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>
Cc: linux-omap@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, letux-kernel@...nphoenux.org,
"H. Nikolaus Schaller" <hns@...delico.com>
Subject: [PATCH 05/32] ARM: dts: omap3-gta04: add devconf1 setup for correct tvout pins
The VENC with external OPA362 amplifier needs a special
"pinmux" setup in DEVCONF1 (TVOUTBYPASS and TVOUTACEN).
Signed-off-by: H. Nikolaus Schaller <hns@...delico.com>
---
arch/arm/boot/dts/omap3-gta04.dtsi | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)
diff --git a/arch/arm/boot/dts/omap3-gta04.dtsi b/arch/arm/boot/dts/omap3-gta04.dtsi
index fa887743860e..01f590f06536 100644
--- a/arch/arm/boot/dts/omap3-gta04.dtsi
+++ b/arch/arm/boot/dts/omap3-gta04.dtsi
@@ -169,6 +169,24 @@
compatible = "mmc-pwrseq-simple";
reset-gpios = <&tca6507 0 GPIO_ACTIVE_LOW>; /* W2CBW003 reset through tca6507 */
};
+
+ /* devconf1 setup for tvout pins */
+ pinmux_tv_out@...022d8 {
+ compatible = "pinctrl-single";
+ reg = <0x480022d8 4>; /* CONTROL_DEVCONF1 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-single,bit-per-mux;
+ pinctrl-single,register-width = <32>;
+ pinctrl-single,function-mask = <0x81>; /* TV out pin control */
+ #pinctrl-cells = <2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&tv_acbias_devconf1_pins>;
+ tv_acbias_devconf1_pins: pinmux_tv_acbias_devconf1_pins {
+ /* offset bits mask */
+ pinctrl-single,bits = <0x00 0x40800 0x40800>; /* set TVOUTBYPASS and TVOUTACEN */
+ };
+ };
};
&omap3_pmx_core {
--
2.12.2
Powered by blists - more mailing lists