| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Wed, 25 Jul 2018 12:35:56 +0300
From: Stanimir Varbanov <stanimir.varbanov@...aro.org>
To: Vikash Garodia <vgarodia@...eaurora.org>, hverkuil@...all.nl,
mchehab@...nel.org, robh@...nel.org, mark.rutland@....com,
andy.gross@...aro.org, arnd@...db.de, bjorn.andersson@...aro.org
Cc: linux-media@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-arm-msm@...r.kernel.org, linux-soc@...r.kernel.org,
devicetree@...r.kernel.org, acourbot@...omium.org
Subject: Re: [PATCH v3 2/4] venus: firmware: move load firmware in a separate
function
Hi Vikash,
On 07/04/2018 10:06 PM, Vikash Garodia wrote:
> Separate firmware loading part into a new function.
I cannot apply this patch in order to test the series.
>
> Signed-off-by: Vikash Garodia <vgarodia@...eaurora.org>
> ---
> drivers/media/platform/qcom/venus/core.c | 4 +-
> drivers/media/platform/qcom/venus/firmware.c | 58 +++++++++++++++++-----------
> drivers/media/platform/qcom/venus/firmware.h | 2 +-
> 3 files changed, 39 insertions(+), 25 deletions(-)
>
> diff --git a/drivers/media/platform/qcom/venus/core.c b/drivers/media/platform/qcom/venus/core.c
> index bb6add9..75b9785 100644
> --- a/drivers/media/platform/qcom/venus/core.c
> +++ b/drivers/media/platform/qcom/venus/core.c
> @@ -84,7 +84,7 @@ static void venus_sys_error_handler(struct work_struct *work)
>
> pm_runtime_get_sync(core->dev);
>
> - ret |= venus_boot(core->dev, core->res->fwname);
> + ret |= venus_boot(core);
>
> ret |= hfi_core_resume(core, true);
>
> @@ -284,7 +284,7 @@ static int venus_probe(struct platform_device *pdev)
> if (ret < 0)
> goto err_runtime_disable;
>
> - ret = venus_boot(dev, core->res->fwname);
> + ret = venus_boot(core);
> if (ret)
> goto err_runtime_disable;
>
> diff --git a/drivers/media/platform/qcom/venus/firmware.c b/drivers/media/platform/qcom/venus/firmware.c
> index 3968553d..6d6cca4 100644
> --- a/drivers/media/platform/qcom/venus/firmware.c
> +++ b/drivers/media/platform/qcom/venus/firmware.c
> @@ -63,40 +63,37 @@ int venus_set_hw_state(struct venus_core *core, bool resume)
> }
> EXPORT_SYMBOL_GPL(venus_set_hw_state);
>
> -int venus_boot(struct device *dev, const char *fwname)
> +static int venus_load_fw(struct venus_core *core, const char *fwname,
> + phys_addr_t *mem_phys, size_t *mem_size)
the next function argument on new line should be just below open brace
> {
> const struct firmware *mdt;
> struct device_node *node;
> - phys_addr_t mem_phys;
> + struct device *dev;
> struct resource r;
> ssize_t fw_size;
> - size_t mem_size;
> void *mem_va;
> int ret;
>
> - if (!IS_ENABLED(CONFIG_QCOM_MDT_LOADER) || !qcom_scm_is_available())
> - return -EPROBE_DEFER;
> -
> + dev = core->dev;
> node = of_parse_phandle(dev->of_node, "memory-region", 0);
> if (!node) {
> dev_err(dev, "no memory-region specified\n");
> return -EINVAL;
> }
> -
please don't delete above blank line
> ret = of_address_to_resource(node, 0, &r);
> if (ret)
> return ret;
>
> - mem_phys = r.start;
> - mem_size = resource_size(&r);
> + *mem_phys = r.start;
> + *mem_size = resource_size(&r);
>
> - if (mem_size < VENUS_FW_MEM_SIZE)
> + if (*mem_size < VENUS_FW_MEM_SIZE)
> return -EINVAL;
>
> - mem_va = memremap(r.start, mem_size, MEMREMAP_WC);
> + mem_va = memremap(r.start, *mem_size, MEMREMAP_WC);
> if (!mem_va) {
> dev_err(dev, "unable to map memory region: %pa+%zx\n",
> - &r.start, mem_size);
> + &r.start, *mem_size);
> return -ENOMEM;
> }
>
> @@ -110,24 +107,41 @@ int venus_boot(struct device *dev, const char *fwname)
> release_firmware(mdt);
> goto err_unmap;
> }
> -
> - ret = qcom_mdt_load(dev, mdt, fwname, VENUS_PAS_ID, mem_va, mem_phys,
> - mem_size);
> + if (core->no_tz)
> + ret = qcom_mdt_load_no_init(dev, mdt, fwname, VENUS_PAS_ID,
> + mem_va, *mem_phys, *mem_size, NULL);
indentation is wrong see the original code
> + else
> + ret = qcom_mdt_load(dev, mdt, fwname, VENUS_PAS_ID, mem_va,
> + *mem_phys, *mem_size);
indentation again
>
> release_firmware(mdt);
>
> - if (ret)
> - goto err_unmap;
> -
> - ret = qcom_scm_pas_auth_and_reset(VENUS_PAS_ID);
> - if (ret)
> - goto err_unmap;
> -
> err_unmap:
> memunmap(mem_va);
> return ret;
> }
>
> +int venus_boot(struct venus_core *core)
> +{
> + phys_addr_t mem_phys;
> + size_t mem_size;
> + int ret;
> + struct device *dev;
please order declarations from longer to shorter.
> +
> + if (!IS_ENABLED(CONFIG_QCOM_MDT_LOADER))
> + return -EPROBE_DEFER;
the original venus_boot was checking for || !qcom_scm_is_available() why
is that removed? It was done on purpose.
> +
> + dev = core->dev;
this could be done when dev is declared.
> +
> + ret = venus_load_fw(core, core->res->fwname, &mem_phys, &mem_size);
> + if (ret) {
> + dev_err(dev, "fail to load video firmware\n");
> + return -EINVAL;
> + }
> +
> + return qcom_scm_pas_auth_and_reset(VENUS_PAS_ID);
> +}
> +
> int venus_shutdown(struct device *dev)
> {
> return qcom_scm_pas_shutdown(VENUS_PAS_ID);
> diff --git a/drivers/media/platform/qcom/venus/firmware.h b/drivers/media/platform/qcom/venus/firmware.h
> index ff2e70e..36a5fc2 100644
> --- a/drivers/media/platform/qcom/venus/firmware.h
> +++ b/drivers/media/platform/qcom/venus/firmware.h
> @@ -16,7 +16,7 @@
>
> struct device;
>
> -int venus_boot(struct device *dev, const char *fwname);
> +int venus_boot(struct venus_core *core);
> int venus_shutdown(struct device *dev);
> int venus_set_hw_state(struct venus_core *core, bool suspend);
>
>
--
regards,
Stan
Powered by blists - more mailing lists