lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20180726210655.03eca681@bbrezillon>
Date:   Thu, 26 Jul 2018 21:06:55 +0200
From:   Boris Brezillon <boris.brezillon@...tlin.com>
To:     Miquel Raynal <miquel.raynal@...tlin.com>
Cc:     Alexandre Belloni <alexandre.belloni@...tlin.com>,
        Mans Rullgard <mans@...sr.com>,
        Maxime Ripard <maxime.ripard@...tlin.com>,
        Stefan Agner <stefan@...er.ch>, linux-kernel@...r.kernel.org,
        Masahiro Yamada <yamada.masahiro@...ionext.com>,
        linux-mtd@...ts.infradead.org, Kamal Dasu <kdasu.kdev@...il.com>,
        Josh Wu <rainyfeeling@...look.com>,
        Marc Gonzalez <marc.w.gonzalez@...e.fr>,
        Marek Vasut <marek.vasut@...il.com>,
        Chen-Yu Tsai <wens@...e.org>,
        bcm-kernel-feedback-list@...adcom.com,
        Sylvain Lemieux <slemieux.tyco@...il.com>,
        Wenyou Yang <wenyou.yang@...rochip.com>,
        Tudor Ambarus <Tudor.Ambarus@...rochip.com>,
        Vladimir Zapolskiy <vz@...ia.com>,
        Harvey Hunt <harveyhuntnexus@...il.com>,
        linux-mediatek@...ts.infradead.org,
        Matthias Brugger <matthias.bgg@...il.com>,
        Han Xu <han.xu@....com>, Xiaolei Li <xiaolei.li@...iatek.com>,
        linux-arm-kernel@...ts.infradead.org,
        Nicolas Ferre <nicolas.ferre@...rochip.com>,
        Richard Weinberger <richard@....at>,
        Brian Norris <computersforpeace@...il.com>,
        David Woodhouse <dwmw2@...radead.org>
Subject: Re: [PATCH v4 27/35] mtd: rawnand: sm_common: convert driver to
 nand_scan_with_ids()

On Sun, 22 Jul 2018 08:44:32 +0200
Boris Brezillon <boris.brezillon@...tlin.com> wrote:

> On Fri, 20 Jul 2018 17:15:19 +0200
> Miquel Raynal <miquel.raynal@...tlin.com> wrote:
> 
> > Two helpers have been added to the core to make ECC-related
> > configuration between the detection phase and the final NAND scan. Use
> > these hooks and convert the driver to just use nand_scan_with_ids()
> > (alternative to nand_scan() for passing a flash IDs table) instead of
> > both nand_scan_ident() and nand_scan_tail().
> > 
> > Signed-off-by: Miquel Raynal <miquel.raynal@...tlin.com>  
> 
> Reviewed-by: Boris Brezillon <boris.brezillon@...tlin.com>
> 
> > ---
> >  drivers/mtd/nand/raw/sm_common.c | 39 +++++++++++++++++++++++++--------------
> >  1 file changed, 25 insertions(+), 14 deletions(-)
> > 
> > diff --git a/drivers/mtd/nand/raw/sm_common.c b/drivers/mtd/nand/raw/sm_common.c
> > index 7f5044a79f01..d05e3f976a5e 100644
> > --- a/drivers/mtd/nand/raw/sm_common.c
> > +++ b/drivers/mtd/nand/raw/sm_common.c
> > @@ -160,19 +160,9 @@ static struct nand_flash_dev nand_xd_flash_ids[] = {
> >  	{NULL}
> >  };
> >  
> > -int sm_register_device(struct mtd_info *mtd, int smartmedia)
> > +static int sm_attach_chip(struct nand_chip *chip)
> >  {
> > -	struct nand_chip *chip = mtd_to_nand(mtd);
> > -	int ret;
> > -
> > -	chip->options |= NAND_SKIP_BBTSCAN;
> > -
> > -	/* Scan for card properties */
> > -	ret = nand_scan_ident(mtd, 1, smartmedia ?
> > -		nand_smartmedia_flash_ids : nand_xd_flash_ids);
> > -
> > -	if (ret)
> > -		return ret;
> > +	struct mtd_info *mtd = nand_to_mtd(chip);
> >  
> >  	/* Bad block marker position */
> >  	chip->badblockpos = 0x05;
> > @@ -187,12 +177,33 @@ int sm_register_device(struct mtd_info *mtd, int smartmedia)
> >  	else
> >  		return -ENODEV;
> >  
> > -	ret = nand_scan_tail(mtd);
> > +	return 0;
> > +}
> >  
> > +static const struct nand_controller_ops sm_controller_ops = {
> > +	.attach_chip = sm_attach_chip,
> > +};
> > +
> > +int sm_register_device(struct mtd_info *mtd, int smartmedia)
> > +{
> > +	struct nand_chip *chip = mtd_to_nand(mtd);
> > +	struct nand_flash_dev *flash_ids;
> > +	int ret;
> > +
> > +	chip->options |= NAND_SKIP_BBTSCAN;
> > +
> > +	/* Scan for card properties */
> > +	chip->dummy_controller.ops = &sm_controller_ops;
> > +	flash_ids = smartmedia ? nand_smartmedia_flash_ids : nand_xd_flash_ids;
> > +	ret = nand_scan_with_ids(mtd, 1, flash_ids);
> >  	if (ret)
> >  		return ret;
> >  
> > -	return mtd_device_register(mtd, NULL, 0);
> > +	ret = mtd_device_register(mtd, NULL, 0);
> > +	if (ret)
> > +		nand_release(mtd);

Didn't notice that while reviewing, but it would have been better to
use nand_cleanup() and do this change separately.

> > +
> > +	return ret;
> >  }
> >  EXPORT_SYMBOL_GPL(sm_register_device);
> >    
> 
> 
> ______________________________________________________
> Linux MTD discussion mailing list
> http://lists.infradead.org/mailman/listinfo/linux-mtd/

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ