| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20180727082611.GE4628@dell>
Date: Fri, 27 Jul 2018 09:26:11 +0100
From: Lee Jones <lee.jones@...aro.org>
To: Jae Hyun Yoo <jae.hyun.yoo@...ux.intel.com>
Cc: Jean Delvare <jdelvare@...e.com>,
Guenter Roeck <linux@...ck-us.net>,
Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Joel Stanley <joel@....id.au>,
Andrew Jeffery <andrew@...id.au>,
Jonathan Corbet <corbet@....net>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Gustavo Pimentel <gustavo.pimentel@...opsys.com>,
Kishon Vijay Abraham I <kishon@...com>,
Lorenzo Pieralisi <lorenzo.pieralisi@....com>,
"Darrick J . Wong" <darrick.wong@...cle.com>,
Eric Sandeen <sandeen@...hat.com>,
Arnd Bergmann <arnd@...db.de>, Wu Hao <hao.wu@...el.com>,
Tomohiro Kusumi <kusumi.tomohiro@...il.com>,
"Bryant G . Ly" <bryantly@...ux.vnet.ibm.com>,
Frederic Barrat <fbarrat@...ux.vnet.ibm.com>,
"David S . Miller" <davem@...emloft.net>,
Mauro Carvalho Chehab <mchehab+samsung@...nel.org>,
Andrew Morton <akpm@...ux-foundation.org>,
Randy Dunlap <rdunlap@...radead.org>,
Philippe Ombredanne <pombredanne@...b.com>,
Vinod Koul <vkoul@...nel.org>,
Stephen Boyd <sboyd@...eaurora.org>,
David Kershner <david.kershner@...sys.com>,
Uwe Kleine-Konig <u.kleine-koenig@...gutronix.de>,
Sagar Dharia <sdharia@...eaurora.org>,
Johan Hovold <johan@...nel.org>,
Thomas Gleixner <tglx@...utronix.de>,
Juergen Gross <jgross@...e.com>,
Cyrille Pitchen <cyrille.pitchen@...ev4u.fr>,
linux-hwmon@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-aspeed@...ts.ozlabs.org, linux-doc@...r.kernel.org,
openbmc@...ts.ozlabs.org,
James Feist <james.feist@...ux.intel.com>,
Jason M Biils <jason.m.bills@...ux.intel.com>,
Vernon Mauery <vernon.mauery@...ux.intel.com>
Subject: Re: [PATCH v7 08/12] mfd: intel-peci-client: Add PECI client MFD
driver
On Mon, 23 Jul 2018, Jae Hyun Yoo wrote:
> This commit adds PECI client MFD driver.
>
> Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@...ux.intel.com>
> Cc: Lee Jones <lee.jones@...aro.org>
> Cc: Rob Herring <robh+dt@...nel.org>
> Cc: Andrew Jeffery <andrew@...id.au>
> Cc: James Feist <james.feist@...ux.intel.com>
> Cc: Jason M Biils <jason.m.bills@...ux.intel.com>
> Cc: Joel Stanley <joel@....id.au>
> Cc: Vernon Mauery <vernon.mauery@...ux.intel.com>
> ---
> drivers/mfd/Kconfig | 14 ++
> drivers/mfd/Makefile | 1 +
> drivers/mfd/intel-peci-client.c | 182 ++++++++++++++++++++++++++
> include/linux/mfd/intel-peci-client.h | 81 ++++++++++++
> 4 files changed, 278 insertions(+)
> create mode 100644 drivers/mfd/intel-peci-client.c
> create mode 100644 include/linux/mfd/intel-peci-client.h
>
> diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
> index f3fa516011ec..e38b591479d4 100644
> --- a/drivers/mfd/Kconfig
> +++ b/drivers/mfd/Kconfig
> @@ -595,6 +595,20 @@ config MFD_INTEL_MSIC
> Passage) chip. This chip embeds audio, battery, GPIO, etc.
> devices used in Intel Medfield platforms.
>
> +config MFD_INTEL_PECI_CLIENT
> + bool "Intel PECI client"
> + depends on (PECI || COMPILE_TEST)
> + select MFD_CORE
> + help
> + If you say yes to this option, support will be included for the
> + multi-funtional Intel PECI (Platform Environment Control Interface)
> + client. PECI is a one-wire bus interface that provides a communication
> + channel from PECI clients in Intel processors and chipset components
> + to external monitoring or control devices.
> +
> + Additional drivers must be enabled in order to use the functionality
> + of the device.
> +
> config MFD_IPAQ_MICRO
> bool "Atmel Micro ASIC (iPAQ h3100/h3600/h3700) Support"
> depends on SA1100_H3100 || SA1100_H3600
> diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
> index 2852a6042ecf..29e2cacc58bd 100644
> --- a/drivers/mfd/Makefile
> +++ b/drivers/mfd/Makefile
> @@ -203,6 +203,7 @@ obj-$(CONFIG_MFD_INTEL_LPSS) += intel-lpss.o
> obj-$(CONFIG_MFD_INTEL_LPSS_PCI) += intel-lpss-pci.o
> obj-$(CONFIG_MFD_INTEL_LPSS_ACPI) += intel-lpss-acpi.o
> obj-$(CONFIG_MFD_INTEL_MSIC) += intel_msic.o
> +obj-$(CONFIG_MFD_INTEL_PECI_CLIENT) += intel-peci-client.o
> obj-$(CONFIG_MFD_PALMAS) += palmas.o
> obj-$(CONFIG_MFD_VIPERBOARD) += viperboard.o
> obj-$(CONFIG_MFD_RC5T583) += rc5t583.o rc5t583-irq.o
> diff --git a/drivers/mfd/intel-peci-client.c b/drivers/mfd/intel-peci-client.c
> new file mode 100644
> index 000000000000..d7702cf1ea50
> --- /dev/null
> +++ b/drivers/mfd/intel-peci-client.c
> @@ -0,0 +1,182 @@
> +// SPDX-License-Identifier: GPL-2.0
> +// Copyright (c) 2018 Intel Corporation
> +
> +#include <linux/bitfield.h>
> +#include <linux/mfd/core.h>
> +#include <linux/mfd/intel-peci-client.h>
> +#include <linux/module.h>
> +#include <linux/peci.h>
> +#include <linux/of_device.h>
> +
> +enum cpu_gens {
> + CPU_GEN_HSX = 0, /* Haswell Xeon */
> + CPU_GEN_BRX, /* Broadwell Xeon */
> + CPU_GEN_SKX, /* Skylake Xeon */
> +};
> +
> +static struct mfd_cell peci_functions[] = {
> + {
> + .name = "peci-cputemp",
> + .of_compatible = "intel,peci-cputemp",
> + },
> + {
> + .name = "peci-dimmtemp",
> + .of_compatible = "intel,peci-dimmtemp",
> + },
> +};
The more I look at this driver, the less I think it fits into MFD.
What's stopping you from registering these devices directly from DT?
--
Lee Jones [李琼斯]
Linaro Services Technical Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
Powered by blists - more mailing lists