lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1532685889-31345-5-git-send-email-rplsssn@codeaurora.org>
Date:   Fri, 27 Jul 2018 15:34:47 +0530
From:   Raju P L S S S N <rplsssn@...eaurora.org>
To:     andy.gross@...aro.org, david.brown@...aro.org,
        linux-arm-msm@...r.kernel.org, linux-soc@...r.kernel.org
Cc:     rnayak@...eaurora.org, bjorn.andersson@...aro.org,
        linux-kernel@...r.kernel.org, sboyd@...nel.org,
        evgreen@...omium.org, dianders@...omium.org, mka@...omium.org,
        ilina@...eaurora.org, "Raju P.L.S.S.S.N" <rplsssn@...eaurora.org>
Subject: [PATCH v2 4/6] drivers: qcom: rpmh-rsc: clear active mode configuration for waketcs

From: "Raju P.L.S.S.S.N" <rplsssn@...eaurora.org>

For RSCs that have sleep & wake TCS but no dedicated active TCS, wake
TCS can be re-purposed to send active requests. Once the active requests
are sent and response is received, the active mode configuration needs
to be cleared so that controller can use wake TCS for sending wake
requests in 'solver' state while executing low power modes.

Signed-off-by: Raju P.L.S.S.S.N <rplsssn@...eaurora.org>
---
 drivers/soc/qcom/rpmh-rsc.c | 77 +++++++++++++++++++++++++++++++--------------
 1 file changed, 54 insertions(+), 23 deletions(-)

diff --git a/drivers/soc/qcom/rpmh-rsc.c b/drivers/soc/qcom/rpmh-rsc.c
index 42d0041..19616c9 100644
--- a/drivers/soc/qcom/rpmh-rsc.c
+++ b/drivers/soc/qcom/rpmh-rsc.c
@@ -199,6 +199,42 @@ static const struct tcs_request *get_req_from_tcs(struct rsc_drv *drv,
 	return NULL;
 }
 
+static void __tcs_trigger(struct rsc_drv *drv, int tcs_id, bool trigger)
+{
+	u32 enable;
+
+	/*
+	 * HW req: Clear the DRV_CONTROL and enable TCS again
+	 * While clearing ensure that the AMC mode trigger is cleared
+	 * and then the mode enable is cleared.
+	 */
+	enable = read_tcs_reg(drv, RSC_DRV_CONTROL, tcs_id, 0);
+	enable &= ~TCS_AMC_MODE_TRIGGER;
+	write_tcs_reg_sync(drv, RSC_DRV_CONTROL, tcs_id, enable);
+	enable &= ~TCS_AMC_MODE_ENABLE;
+	write_tcs_reg_sync(drv, RSC_DRV_CONTROL, tcs_id, enable);
+
+	if (trigger) {
+		/* Enable the AMC mode on the TCS and then trigger the TCS */
+		enable = TCS_AMC_MODE_ENABLE;
+		write_tcs_reg_sync(drv, RSC_DRV_CONTROL, tcs_id, enable);
+		enable |= TCS_AMC_MODE_TRIGGER;
+		write_tcs_reg_sync(drv, RSC_DRV_CONTROL, tcs_id, enable);
+	}
+}
+
+static inline void enable_tcs_irq(struct rsc_drv *drv, int tcs_id, bool enable)
+{
+	u32 data;
+
+	data = read_tcs_reg(drv, RSC_DRV_IRQ_ENABLE, 0, 0);
+	if (enable)
+		data |= BIT(tcs_id);
+	else
+		data &= ~BIT(tcs_id);
+	write_tcs_reg(drv, RSC_DRV_IRQ_ENABLE, 0, data);
+}
+
 /**
  * tcs_tx_done: TX Done interrupt handler
  */
@@ -235,6 +271,21 @@ static irqreturn_t tcs_tx_done(int irq, void *p)
 		}
 
 		trace_rpmh_tx_done(drv, i, req, err);
+
+		/*
+		 * if wake tcs was re-purposed for sending active
+		 * votes, clear AMC trigger & enable modes and
+		 * disable interrupt for this TCS
+		 */
+		if (!drv->tcs[ACTIVE_TCS].num_tcs) {
+			__tcs_trigger(drv, i, false);
+			/*
+			 * Disable interrupt for this TCS to avoid being
+			 * spammed with interrupts coming when the solver
+			 * sends its wake votes.
+			 */
+			enable_tcs_irq(drv, i, false);
+		}
 skip:
 		/* Reclaim the TCS */
 		write_tcs_reg(drv, RSC_DRV_CMD_ENABLE, i, 0);
@@ -282,28 +333,6 @@ static void __tcs_buffer_write(struct rsc_drv *drv, int tcs_id, int cmd_id,
 	write_tcs_reg(drv, RSC_DRV_CMD_ENABLE, tcs_id, cmd_enable);
 }
 
-static void __tcs_trigger(struct rsc_drv *drv, int tcs_id)
-{
-	u32 enable;
-
-	/*
-	 * HW req: Clear the DRV_CONTROL and enable TCS again
-	 * While clearing ensure that the AMC mode trigger is cleared
-	 * and then the mode enable is cleared.
-	 */
-	enable = read_tcs_reg(drv, RSC_DRV_CONTROL, tcs_id, 0);
-	enable &= ~TCS_AMC_MODE_TRIGGER;
-	write_tcs_reg_sync(drv, RSC_DRV_CONTROL, tcs_id, enable);
-	enable &= ~TCS_AMC_MODE_ENABLE;
-	write_tcs_reg_sync(drv, RSC_DRV_CONTROL, tcs_id, enable);
-
-	/* Enable the AMC mode on the TCS and then trigger the TCS */
-	enable = TCS_AMC_MODE_ENABLE;
-	write_tcs_reg_sync(drv, RSC_DRV_CONTROL, tcs_id, enable);
-	enable |= TCS_AMC_MODE_TRIGGER;
-	write_tcs_reg_sync(drv, RSC_DRV_CONTROL, tcs_id, enable);
-}
-
 static int check_for_req_inflight(struct rsc_drv *drv, struct tcs_group *tcs,
 				  const struct tcs_request *msg)
 {
@@ -374,10 +403,12 @@ static int tcs_write(struct rsc_drv *drv, const struct tcs_request *msg)
 
 	tcs->req[tcs_id - tcs->offset] = msg;
 	set_bit(tcs_id, drv->tcs_in_use);
+	if (msg->state == RPMH_ACTIVE_ONLY_STATE && tcs->type != ACTIVE_TCS)
+		enable_tcs_irq(drv, tcs_id, true);
 	spin_unlock(&drv->lock);
 
 	__tcs_buffer_write(drv, tcs_id, 0, msg);
-	__tcs_trigger(drv, tcs_id);
+	__tcs_trigger(drv, tcs_id, true);
 
 done_write:
 	spin_unlock_irqrestore(&tcs->lock, flags);
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,\na Linux Foundation Collaborative Project

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ