| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1532794529-30137-1-git-send-email-srinath.mannam@broadcom.com>
Date: Sat, 28 Jul 2018 21:45:29 +0530
From: Srinath Mannam <srinath.mannam@...adcom.com>
To: Ulf Hansson <ulf.hansson@...aro.org>,
Adrian Hunter <adrian.hunter@...el.com>,
Ray Jui <rjui@...adcom.com>,
Scott Branden <sbranden@...adcom.com>,
vikram.prakash@...adcom.com
Cc: bcm-kernel-feedback-list@...adcom.com, linux-mmc@...r.kernel.org,
linux-kernel@...r.kernel.org,
Srinath Mannam <srinath.mannam@...adcom.com>
Subject: [PATCH v2] mmc: host: iproc: Add ACPI support to IPROC SDHCI
Add ACPI support to all IPROC SDHCI varients
Signed-off-by: Srinath Mannam <srinath.mannam@...adcom.com>
Reviewed-by: Ray Jui <ray.jui@...adcom.com>
Reviewed-by: Scott Branden <scott.branden@...adcom.com>
Reviewed-by: Vladimir Olovyannikov <vladimir.olovyannikov@...adcom.com>
---
Changes from v1:
- Removed sdhci_iproc_data array change and add directly
into of and acpi id tables.
- Add a change to get match data directly.
- Removed clock-frequency property read change.
- Used sdhci_get_property to get properties.
- Verified with patch given by Adrian Hunter
mmc: sdhci-pltfm: Convert DT properties to generic device properties
drivers/mmc/host/Kconfig | 1 +
drivers/mmc/host/sdhci-iproc.c | 63 +++++++++++++++++++++++++++++-------------
2 files changed, 45 insertions(+), 19 deletions(-)
diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
index 0581c19..bc6702e 100644
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
@@ -334,6 +334,7 @@ config MMC_SDHCI_IPROC
tristate "SDHCI support for the BCM2835 & iProc SD/MMC Controller"
depends on ARCH_BCM2835 || ARCH_BCM_IPROC || COMPILE_TEST
depends on MMC_SDHCI_PLTFM
+ depends on OF || ACPI
default ARCH_BCM_IPROC
select MMC_SDHCI_IO_ACCESSORS
help
diff --git a/drivers/mmc/host/sdhci-iproc.c b/drivers/mmc/host/sdhci-iproc.c
index d0e83db..abf5269 100644
--- a/drivers/mmc/host/sdhci-iproc.c
+++ b/drivers/mmc/host/sdhci-iproc.c
@@ -15,6 +15,7 @@
* iProc SDHCI platform driver
*/
+#include <linux/acpi.h>
#include <linux/delay.h>
#include <linux/module.h>
#include <linux/mmc/host.h>
@@ -162,9 +163,19 @@ static void sdhci_iproc_writeb(struct sdhci_host *host, u8 val, int reg)
sdhci_iproc_writel(host, newval, reg & ~3);
}
+static unsigned int sdhci_iproc_get_max_clock(struct sdhci_host *host)
+{
+ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+
+ if (pltfm_host->clk)
+ return sdhci_pltfm_clk_get_max_clock(host);
+ else
+ return pltfm_host->clock;
+}
+
static const struct sdhci_ops sdhci_iproc_ops = {
.set_clock = sdhci_set_clock,
- .get_max_clock = sdhci_pltfm_clk_get_max_clock,
+ .get_max_clock = sdhci_iproc_get_max_clock,
.set_bus_width = sdhci_set_bus_width,
.reset = sdhci_reset,
.set_uhs_signaling = sdhci_set_uhs_signaling,
@@ -178,7 +189,7 @@ static const struct sdhci_ops sdhci_iproc_32only_ops = {
.write_w = sdhci_iproc_writew,
.write_b = sdhci_iproc_writeb,
.set_clock = sdhci_set_clock,
- .get_max_clock = sdhci_pltfm_clk_get_max_clock,
+ .get_max_clock = sdhci_iproc_get_max_clock,
.set_bus_width = sdhci_set_bus_width,
.reset = sdhci_reset,
.set_uhs_signaling = sdhci_set_uhs_signaling,
@@ -256,19 +267,29 @@ static const struct of_device_id sdhci_iproc_of_match[] = {
};
MODULE_DEVICE_TABLE(of, sdhci_iproc_of_match);
+static const struct acpi_device_id sdhci_iproc_acpi_ids[] = {
+ { .id = "BRCM5871", .driver_data = (kernel_ulong_t)&iproc_cygnus_data },
+ { .id = "BRCM5872", .driver_data = (kernel_ulong_t)&iproc_data },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(acpi, sdhci_iproc_acpi_ids);
+
static int sdhci_iproc_probe(struct platform_device *pdev)
{
- const struct of_device_id *match;
- const struct sdhci_iproc_data *iproc_data;
+ struct device *dev = &pdev->dev;
+ const struct sdhci_iproc_data *iproc_data = NULL;
struct sdhci_host *host;
struct sdhci_iproc_host *iproc_host;
struct sdhci_pltfm_host *pltfm_host;
int ret;
- match = of_match_device(sdhci_iproc_of_match, &pdev->dev);
- if (!match)
- return -EINVAL;
- iproc_data = match->data;
+ if (dev->of_node)
+ iproc_data = of_device_get_match_data(dev);
+ else if (has_acpi_companion(dev))
+ iproc_data = acpi_device_get_match_data(dev);
+
+ if (!iproc_data)
+ return -ENODEV;
host = sdhci_pltfm_init(pdev, iproc_data->pdata, sizeof(*iproc_host));
if (IS_ERR(host))
@@ -280,19 +301,21 @@ static int sdhci_iproc_probe(struct platform_device *pdev)
iproc_host->data = iproc_data;
mmc_of_parse(host->mmc);
- sdhci_get_of_property(pdev);
+ sdhci_get_property(pdev);
host->mmc->caps |= iproc_host->data->mmc_caps;
- pltfm_host->clk = devm_clk_get(&pdev->dev, NULL);
- if (IS_ERR(pltfm_host->clk)) {
- ret = PTR_ERR(pltfm_host->clk);
- goto err;
- }
- ret = clk_prepare_enable(pltfm_host->clk);
- if (ret) {
- dev_err(&pdev->dev, "failed to enable host clk\n");
- goto err;
+ if (dev->of_node) {
+ pltfm_host->clk = devm_clk_get(dev, NULL);
+ if (IS_ERR(pltfm_host->clk)) {
+ ret = PTR_ERR(pltfm_host->clk);
+ goto err;
+ }
+ ret = clk_prepare_enable(pltfm_host->clk);
+ if (ret) {
+ dev_err(dev, "failed to enable host clk\n");
+ goto err;
+ }
}
if (iproc_host->data->pdata->quirks & SDHCI_QUIRK_MISSING_CAPS) {
@@ -307,7 +330,8 @@ static int sdhci_iproc_probe(struct platform_device *pdev)
return 0;
err_clk:
- clk_disable_unprepare(pltfm_host->clk);
+ if (dev->of_node)
+ clk_disable_unprepare(pltfm_host->clk);
err:
sdhci_pltfm_free(pdev);
return ret;
@@ -317,6 +341,7 @@ static struct platform_driver sdhci_iproc_driver = {
.driver = {
.name = "sdhci-iproc",
.of_match_table = sdhci_iproc_of_match,
+ .acpi_match_table = ACPI_PTR(sdhci_iproc_acpi_ids),
.pm = &sdhci_pltfm_pmops,
},
.probe = sdhci_iproc_probe,
--
2.7.4
Powered by blists - more mailing lists