[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20180728052200.228796-5-toddpoynor@gmail.com>
Date: Fri, 27 Jul 2018 22:21:59 -0700
From: Todd Poynor <toddpoynor@...il.com>
To: Rob Springer <rspringer@...gle.com>,
John Joseph <jnjoseph@...gle.com>,
Ben Chan <benchan@...omium.org>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>
Cc: devel@...verdev.osuosl.org, linux-kernel@...r.kernel.org,
Todd Poynor <toddpoynor@...gle.com>
Subject: [PATCH 4/5] staging: gasket: page table: remove code for "no dma_ops"
From: Todd Poynor <toddpoynor@...gle.com>
Remove code with TODOs on it for working around apparent problems
previously seen in a qemu environment where dma_ops was not set
correctly. There is no user of this in the current code.
Signed-off-by: Todd Poynor <toddpoynor@...gle.com>
---
drivers/staging/gasket/gasket_core.c | 2 +-
drivers/staging/gasket/gasket_page_table.c | 58 +++-------------------
drivers/staging/gasket/gasket_page_table.h | 3 +-
3 files changed, 8 insertions(+), 55 deletions(-)
diff --git a/drivers/staging/gasket/gasket_core.c b/drivers/staging/gasket/gasket_core.c
index f44805c38159b..859a6df9e12df 100644
--- a/drivers/staging/gasket/gasket_core.c
+++ b/drivers/staging/gasket/gasket_core.c
@@ -916,7 +916,7 @@ static int gasket_enable_dev(
&gasket_dev->bar_data[
driver_desc->page_table_bar_index],
&driver_desc->page_table_configs[tbl_idx],
- gasket_dev->dev, gasket_dev->pci_dev, true);
+ gasket_dev->dev, gasket_dev->pci_dev);
if (ret) {
dev_err(gasket_dev->dev,
"Couldn't init page table %d: %d\n",
diff --git a/drivers/staging/gasket/gasket_page_table.c b/drivers/staging/gasket/gasket_page_table.c
index 32f1c1e10c7e2..722839603f20d 100644
--- a/drivers/staging/gasket/gasket_page_table.c
+++ b/drivers/staging/gasket/gasket_page_table.c
@@ -212,12 +212,6 @@ struct gasket_page_table {
* gasket_mmap function, so user_virt belongs in the driver anyhow.
*/
struct gasket_coherent_page_entry *coherent_pages;
-
- /*
- * Whether the page table uses arch specific dma_ops or
- * whether the driver is supplying its own.
- */
- bool dma_ops;
};
/* Mapping declarations */
@@ -290,7 +284,7 @@ int gasket_page_table_init(
struct gasket_page_table **ppg_tbl,
const struct gasket_bar_data *bar_data,
const struct gasket_page_table_config *page_table_config,
- struct device *device, struct pci_dev *pci_dev, bool has_dma_ops)
+ struct device *device, struct pci_dev *pci_dev)
{
ulong bytes;
struct gasket_page_table *pg_tbl;
@@ -353,7 +347,6 @@ int gasket_page_table_init(
bar_data->virt_base[page_table_config->extended_reg]);
pg_tbl->device = device;
pg_tbl->pci_dev = pci_dev;
- pg_tbl->dma_ops = has_dma_ops;
dev_dbg(device, "Page table initialized successfully\n");
@@ -759,33 +752,6 @@ static int gasket_map_extended_pages(
return 0;
}
-/*
- * TODO: dma_map_page() is not plugged properly when running under qemu. i.e.
- * dma_ops are not set properly, which causes the kernel to assert.
- *
- * This temporary hack allows the driver to work on qemu, but need to be fixed:
- * - either manually set the dma_ops for the architecture (which incidentally
- * can't be done in an out-of-tree module) - or get qemu to fill the device tree
- * properly so as linux plug the proper dma_ops or so as the driver can detect
- * that it is runnig on qemu
- */
-static inline dma_addr_t _no_op_dma_map_page(
- struct device *dev, struct page *page, size_t offset, size_t size,
- enum dma_data_direction dir)
-{
- /*
- * struct dma_map_ops *ops = get_dma_ops(dev);
- * dma_addr_t addr;
- *
- * kmemcheck_mark_initialized(page_address(page) + offset, size);
- * BUG_ON(!valid_dma_direction(dir));
- * addr = ops->map_page(dev, page, offset, size, dir, NULL);
- * debug_dma_map_page(dev, page, offset, size, dir, addr, false);
- */
-
- return page_to_phys(page);
-}
-
/*
* Get and map last level page table buffers.
* @pg_tbl: Gasket page table pointer.
@@ -856,16 +822,9 @@ static int gasket_perform_mapping(
ptes[i].offset = offset;
/* Map the page into DMA space. */
- if (pg_tbl->dma_ops) {
- /* hook in to kernel map functions */
- ptes[i].dma_addr = dma_map_page(pg_tbl->device,
- page, 0, PAGE_SIZE, DMA_BIDIRECTIONAL);
- } else {
- ptes[i].dma_addr = _no_op_dma_map_page(
- pg_tbl->device, page, 0, PAGE_SIZE,
- DMA_BIDIRECTIONAL);
- }
-
+ ptes[i].dma_addr =
+ dma_map_page(pg_tbl->device, page, 0, PAGE_SIZE,
+ DMA_BIDIRECTIONAL);
dev_dbg(pg_tbl->device,
"%s i %d pte %p pfn %p -> mapped %llx\n",
__func__, i, &ptes[i],
@@ -1042,13 +1001,8 @@ static int gasket_alloc_extended_subtable(
}
/* Map the page into DMA space. */
- if (pg_tbl->dma_ops) {
- pte->dma_addr = dma_map_page(pg_tbl->device, pte->page, 0,
- PAGE_SIZE, DMA_BIDIRECTIONAL);
- } else {
- pte->dma_addr = _no_op_dma_map_page(pg_tbl->device, pte->page,
- 0, PAGE_SIZE, DMA_BIDIRECTIONAL);
- }
+ pte->dma_addr = dma_map_page(pg_tbl->device, pte->page, 0, PAGE_SIZE,
+ DMA_BIDIRECTIONAL);
/* Wait until the page is mapped. */
mb();
diff --git a/drivers/staging/gasket/gasket_page_table.h b/drivers/staging/gasket/gasket_page_table.h
index 0e8afdb8c1139..765588649365f 100644
--- a/drivers/staging/gasket/gasket_page_table.h
+++ b/drivers/staging/gasket/gasket_page_table.h
@@ -37,7 +37,6 @@ struct gasket_page_table;
* translation table.
* @device: Device structure for the underlying device. Only used for logging.
* @pci_dev: PCI system descriptor for the underlying device.
- * @bool has_dma_ops: Whether the page table uses arch specific dma_ops or
* whether the driver will supply its own.
*
* Description: Allocates and initializes data to track address translation -
@@ -51,7 +50,7 @@ int gasket_page_table_init(
struct gasket_page_table **ppg_tbl,
const struct gasket_bar_data *bar_data,
const struct gasket_page_table_config *page_table_config,
- struct device *device, struct pci_dev *pci_dev, bool dma_ops);
+ struct device *device, struct pci_dev *pci_dev);
/*
* Deallocate and cleanup page table data.
--
2.18.0.345.g5c9ce644c3-goog
Powered by blists - more mailing lists