lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20180730104636.1a3e6c81@xhacker.debian>
Date:   Mon, 30 Jul 2018 10:46:36 +0800
From:   Jisheng Zhang <Jisheng.Zhang@...aptics.com>
To:     Adrian Hunter <adrian.hunter@...el.com>,
        Ulf Hansson <ulf.hansson@...aro.org>
Cc:     linux-mmc@...r.kernel.org, linux-kernel@...r.kernel.org,
        linux-arm-kernel@...ts.infradead.org
Subject: [PATCH mmc-next v3 3/3] mmc: sdhci-of-dwcmshc: solve 128MB DMA
 boundary limitation

When using DMA, if the DMA addr spans 128MB boundary, we have to split
the DMA transfer into two so that each one doesn't exceed the boundary.

Signed-off-by: Jisheng Zhang <Jisheng.Zhang@...aptics.com>
---
 drivers/mmc/host/sdhci-of-dwcmshc.c | 43 +++++++++++++++++++++++++++++
 1 file changed, 43 insertions(+)

diff --git a/drivers/mmc/host/sdhci-of-dwcmshc.c b/drivers/mmc/host/sdhci-of-dwcmshc.c
index 1b7cd144fb01..e890fc8f5284 100644
--- a/drivers/mmc/host/sdhci-of-dwcmshc.c
+++ b/drivers/mmc/host/sdhci-of-dwcmshc.c
@@ -8,21 +8,52 @@
  */
 
 #include <linux/clk.h>
+#include <linux/mm.h>
 #include <linux/module.h>
 #include <linux/of.h>
+#include <linux/sizes.h>
 
 #include "sdhci-pltfm.h"
 
+#define BOUNDARY_OK(addr, len) \
+	((addr | (SZ_128M - 1)) == ((addr + len - 1) | (SZ_128M - 1)))
+
 struct dwcmshc_priv {
 	struct clk	*bus_clk;
 };
 
+/*
+ * if DMA addr spans 128MB boundary, we split the DMA transfer into two
+ * so that the DMA transfer doesn't exceed the boundary.
+ */
+static unsigned int dwcmshc_adma_write_desc(struct sdhci_host *host,
+					    void *desc, dma_addr_t addr,
+					    int len, unsigned int cmd)
+{
+	int tmplen, offset;
+
+	if (likely(!len || BOUNDARY_OK(addr, len)))
+		return _sdhci_adma_write_desc(host, desc, addr, len, cmd);
+
+	offset = addr & (SZ_128M - 1);
+	tmplen = SZ_128M - offset;
+	_sdhci_adma_write_desc(host, desc, addr, tmplen, cmd);
+
+	addr += tmplen;
+	len -= tmplen;
+	desc += host->desc_sz;
+	_sdhci_adma_write_desc(host, desc, addr, len, cmd);
+
+	return host->desc_sz * 2;
+}
+
 static const struct sdhci_ops sdhci_dwcmshc_ops = {
 	.set_clock		= sdhci_set_clock,
 	.set_bus_width		= sdhci_set_bus_width,
 	.set_uhs_signaling	= sdhci_set_uhs_signaling,
 	.get_max_clock		= sdhci_pltfm_clk_get_max_clock,
 	.reset			= sdhci_reset,
+	.adma_write_desc	= dwcmshc_adma_write_desc,
 };
 
 static const struct sdhci_pltfm_data sdhci_dwcmshc_pdata = {
@@ -36,12 +67,24 @@ static int dwcmshc_probe(struct platform_device *pdev)
 	struct sdhci_host *host;
 	struct dwcmshc_priv *priv;
 	int err;
+	u32 extra;
 
 	host = sdhci_pltfm_init(pdev, &sdhci_dwcmshc_pdata,
 				sizeof(struct dwcmshc_priv));
 	if (IS_ERR(host))
 		return PTR_ERR(host);
 
+	/*
+	 * The DMA descriptor table number is calculated as the maximum
+	 * number of segments times 2, to allow for an alignment
+	 * descriptor for each segment, plus 1 for a nop end descriptor,
+	 * plus extra number for cross 128M boundary handling.
+	 */
+	extra = DIV_ROUND_UP(totalram_pages, SZ_128M / PAGE_SIZE);
+	if (extra > SDHCI_MAX_SEGS)
+		extra = SDHCI_MAX_SEGS;
+	host->adma_table_num = SDHCI_MAX_SEGS * 2 + 1 + extra;
+
 	pltfm_host = sdhci_priv(host);
 	priv = sdhci_pltfm_priv(pltfm_host);
 
-- 
2.18.0

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ