linux-kernel - Re: [PATCH mmc-next v2 3/3] mmc: sdhci-of-dwcmshc: solve 128MB DMA boundary limitation

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Mon, 30 Jul 2018 12:06:08 +0100
From:   Robin Murphy <robin.murphy@....com>
To:     Jisheng Zhang <Jisheng.Zhang@...aptics.com>,
        Adrian Hunter <adrian.hunter@...el.com>,
        Ulf Hansson <ulf.hansson@...aro.org>
Cc:     linux-mmc@...r.kernel.org, linux-kernel@...r.kernel.org,
        linux-arm-kernel@...ts.infradead.org
Subject: Re: [PATCH mmc-next v2 3/3] mmc: sdhci-of-dwcmshc: solve 128MB DMA
 boundary limitation

Hi Jisheng,

On 26/07/18 08:14, Jisheng Zhang wrote:
> When using DMA, if the DMA addr spans 128MB boundary, we have to split
> the DMA transfer into two so that each one doesn't exceed the boundary.

Out of interest, is the driver already setting its segment boundary mask 
appropriately? This sounds like the exact kind of hardware restriction 
that dma_parms is intended to describe, which scatterlist-generating 
code is *supposed* to already respect.

Robin.

> Signed-off-by: Jisheng Zhang <Jisheng.Zhang@...aptics.com>
> ---
>   drivers/mmc/host/sdhci-of-dwcmshc.c | 42 +++++++++++++++++++++++++++++
>   1 file changed, 42 insertions(+)
> 
> diff --git a/drivers/mmc/host/sdhci-of-dwcmshc.c b/drivers/mmc/host/sdhci-of-dwcmshc.c
> index 1b7cd144fb01..7e189514bc83 100644
> --- a/drivers/mmc/host/sdhci-of-dwcmshc.c
> +++ b/drivers/mmc/host/sdhci-of-dwcmshc.c
> @@ -8,21 +8,51 @@
>    */
>   
>   #include <linux/clk.h>
> +#include <linux/mm.h>
>   #include <linux/module.h>
>   #include <linux/of.h>
>   
>   #include "sdhci-pltfm.h"
>   
> +#define BOUNDARY_OK(addr, len) \
> +	((addr | (SZ_128M - 1)) == ((addr + len - 1) | (SZ_128M - 1)))
> +
>   struct dwcmshc_priv {
>   	struct clk	*bus_clk;
>   };
>   
> +/*
> + * if DMA addr spans 128MB boundary, we split the DMA transfer into two
> + * so that the DMA transfer doesn't exceed the boundary.
> + */
> +static unsigned int dwcmshc_adma_write_desc(struct sdhci_host *host,
> +					    void *desc, dma_addr_t addr,
> +					    int len, unsigned int cmd)
> +{
> +	int tmplen, offset;
> +
> +	if (BOUNDARY_OK(addr, len) || !len)
> +		return _sdhci_adma_write_desc(host, desc, addr, len, cmd);
> +
> +	offset = addr & (SZ_128M - 1);
> +	tmplen = SZ_128M - offset;
> +	_sdhci_adma_write_desc(host, desc, addr, tmplen, cmd);
> +
> +	addr += tmplen;
> +	len -= tmplen;
> +	desc += host->desc_sz;
> +	_sdhci_adma_write_desc(host, desc, addr, len, cmd);
> +
> +	return host->desc_sz * 2;
> +}
> +
>   static const struct sdhci_ops sdhci_dwcmshc_ops = {
>   	.set_clock		= sdhci_set_clock,
>   	.set_bus_width		= sdhci_set_bus_width,
>   	.set_uhs_signaling	= sdhci_set_uhs_signaling,
>   	.get_max_clock		= sdhci_pltfm_clk_get_max_clock,
>   	.reset			= sdhci_reset,
> +	.adma_write_desc	= dwcmshc_adma_write_desc,
>   };
>   
>   static const struct sdhci_pltfm_data sdhci_dwcmshc_pdata = {
> @@ -36,12 +66,24 @@ static int dwcmshc_probe(struct platform_device *pdev)
>   	struct sdhci_host *host;
>   	struct dwcmshc_priv *priv;
>   	int err;
> +	u32 extra;
>   
>   	host = sdhci_pltfm_init(pdev, &sdhci_dwcmshc_pdata,
>   				sizeof(struct dwcmshc_priv));
>   	if (IS_ERR(host))
>   		return PTR_ERR(host);
>   
> +	/*
> +	 * The DMA descriptor table number is calculated as the maximum
> +	 * number of segments times 2, to allow for an alignment
> +	 * descriptor for each segment, plus 1 for a nop end descriptor,
> +	 * plus extra number for cross 128M boundary handling.
> +	 */
> +	extra = DIV_ROUND_UP(totalram_pages, SZ_128M / PAGE_SIZE);
> +	if (extra > SDHCI_MAX_SEGS)
> +		extra = SDHCI_MAX_SEGS;
> +	host->adma_table_num = SDHCI_MAX_SEGS * 2 + 1 + extra;
> +
>   	pltfm_host = sdhci_priv(host);
>   	priv = sdhci_pltfm_priv(pltfm_host);
>   
>