| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20180731070117.GE4662@dell>
Date: Tue, 31 Jul 2018 08:01:17 +0100
From: Lee Jones <lee.jones@...aro.org>
To: Jae Hyun Yoo <jae.hyun.yoo@...ux.intel.com>
Cc: Rob Herring <robh+dt@...nel.org>, Jean Delvare <jdelvare@...e.com>,
Guenter Roeck <linux@...ck-us.net>,
Mark Rutland <mark.rutland@....com>,
Joel Stanley <joel@....id.au>,
Andrew Jeffery <andrew@...id.au>,
Jonathan Corbet <corbet@....net>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Gustavo Pimentel <gustavo.pimentel@...opsys.com>,
Kishon Vijay Abraham I <kishon@...com>,
Lorenzo Pieralisi <lorenzo.pieralisi@....com>,
darrick.wong@...cle.com, sandeen@...hat.com,
Arnd Bergmann <arnd@...db.de>, Wu Hao <hao.wu@...el.com>,
kusumi.tomohiro@...il.com, bryantly@...ux.vnet.ibm.com,
fbarrat@...ux.vnet.ibm.com, David Miller <davem@...emloft.net>,
Mauro Carvalho Chehab <mchehab+samsung@...nel.org>,
Andrew Morton <akpm@...ux-foundation.org>,
Randy Dunlap <rdunlap@...radead.org>,
Philippe Ombredanne <pombredanne@...b.com>,
Vinod <vkoul@...nel.org>, Stephen Boyd <sboyd@...eaurora.org>,
david.kershner@...sys.com,
Uwe Kleine-König
<u.kleine-koenig@...gutronix.de>,
Sagar Dharia <sdharia@...eaurora.org>,
Johan Hovold <johan@...nel.org>,
Thomas Gleixner <tglx@...utronix.de>, jgross@...e.com,
Cyrille Pitchen <cyrille.pitchen@...ev4u.fr>,
Linux HWMON List <linux-hwmon@...r.kernel.org>,
devicetree@...r.kernel.org,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE"
<linux-arm-kernel@...ts.infradead.org>,
linux-aspeed@...ts.ozlabs.org,
Linux Doc Mailing List <linux-doc@...r.kernel.org>,
OpenBMC Maillist <openbmc@...ts.ozlabs.org>,
James Feist <james.feist@...ux.intel.com>,
Jason M Biils <jason.m.bills@...ux.intel.com>,
Vernon Mauery <vernon.mauery@...ux.intel.com>
Subject: Re: [PATCH v7 08/12] mfd: intel-peci-client: Add PECI client MFD
driver
On Mon, 30 Jul 2018, Jae Hyun Yoo wrote:
> Hi Rob,
>
> On 7/30/2018 3:10 PM, Rob Herring wrote:
> > On Fri, Jul 27, 2018 at 11:36 AM Jae Hyun Yoo
> > <jae.hyun.yoo@...ux.intel.com> wrote:
> > >
> > > Hi Lee,
> > >
> > > On 7/27/2018 1:26 AM, Lee Jones wrote:
> > > > On Mon, 23 Jul 2018, Jae Hyun Yoo wrote:
> > > >
> > > > > This commit adds PECI client MFD driver.
> > > > >
> > > > > Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@...ux.intel.com>
> > > > > Cc: Lee Jones <lee.jones@...aro.org>
> > > > > Cc: Rob Herring <robh+dt@...nel.org>
> > > > > Cc: Andrew Jeffery <andrew@...id.au>
> > > > > Cc: James Feist <james.feist@...ux.intel.com>
> > > > > Cc: Jason M Biils <jason.m.bills@...ux.intel.com>
> > > > > Cc: Joel Stanley <joel@....id.au>
> > > > > Cc: Vernon Mauery <vernon.mauery@...ux.intel.com>
> > > > > ---
> > > > > drivers/mfd/Kconfig | 14 ++
> > > > > drivers/mfd/Makefile | 1 +
> > > > > drivers/mfd/intel-peci-client.c | 182 ++++++++++++++++++++++++++
> > > > > include/linux/mfd/intel-peci-client.h | 81 ++++++++++++
> > > > > 4 files changed, 278 insertions(+)
> > > > > create mode 100644 drivers/mfd/intel-peci-client.c
> > > > > create mode 100644 include/linux/mfd/intel-peci-client.h
> > > > >
> > > > > diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
> > > > > index f3fa516011ec..e38b591479d4 100644
> > > > > --- a/drivers/mfd/Kconfig
> > > > > +++ b/drivers/mfd/Kconfig
> > > > > @@ -595,6 +595,20 @@ config MFD_INTEL_MSIC
> > > > > Passage) chip. This chip embeds audio, battery, GPIO, etc.
> > > > > devices used in Intel Medfield platforms.
> > > > >
> > > > > +config MFD_INTEL_PECI_CLIENT
> > > > > + bool "Intel PECI client"
> > > > > + depends on (PECI || COMPILE_TEST)
> > > > > + select MFD_CORE
> > > > > + help
> > > > > + If you say yes to this option, support will be included for the
> > > > > + multi-funtional Intel PECI (Platform Environment Control Interface)
> > > > > + client. PECI is a one-wire bus interface that provides a communication
> > > > > + channel from PECI clients in Intel processors and chipset components
> > > > > + to external monitoring or control devices.
> > > > > +
> > > > > + Additional drivers must be enabled in order to use the functionality
> > > > > + of the device.
> > > > > +
> > > > > config MFD_IPAQ_MICRO
> > > > > bool "Atmel Micro ASIC (iPAQ h3100/h3600/h3700) Support"
> > > > > depends on SA1100_H3100 || SA1100_H3600
> > > > > diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
> > > > > index 2852a6042ecf..29e2cacc58bd 100644
> > > > > --- a/drivers/mfd/Makefile
> > > > > +++ b/drivers/mfd/Makefile
> > > > > @@ -203,6 +203,7 @@ obj-$(CONFIG_MFD_INTEL_LPSS) += intel-lpss.o
> > > > > obj-$(CONFIG_MFD_INTEL_LPSS_PCI) += intel-lpss-pci.o
> > > > > obj-$(CONFIG_MFD_INTEL_LPSS_ACPI) += intel-lpss-acpi.o
> > > > > obj-$(CONFIG_MFD_INTEL_MSIC) += intel_msic.o
> > > > > +obj-$(CONFIG_MFD_INTEL_PECI_CLIENT) += intel-peci-client.o
> > > > > obj-$(CONFIG_MFD_PALMAS) += palmas.o
> > > > > obj-$(CONFIG_MFD_VIPERBOARD) += viperboard.o
> > > > > obj-$(CONFIG_MFD_RC5T583) += rc5t583.o rc5t583-irq.o
> > > > > diff --git a/drivers/mfd/intel-peci-client.c b/drivers/mfd/intel-peci-client.c
> > > > > new file mode 100644
> > > > > index 000000000000..d7702cf1ea50
> > > > > --- /dev/null
> > > > > +++ b/drivers/mfd/intel-peci-client.c
> > > > > @@ -0,0 +1,182 @@
> > > > > +// SPDX-License-Identifier: GPL-2.0
> > > > > +// Copyright (c) 2018 Intel Corporation
> > > > > +
> > > > > +#include <linux/bitfield.h>
> > > > > +#include <linux/mfd/core.h>
> > > > > +#include <linux/mfd/intel-peci-client.h>
> > > > > +#include <linux/module.h>
> > > > > +#include <linux/peci.h>
> > > > > +#include <linux/of_device.h>
> > > > > +
> > > > > +enum cpu_gens {
> > > > > + CPU_GEN_HSX = 0, /* Haswell Xeon */
> > > > > + CPU_GEN_BRX, /* Broadwell Xeon */
> > > > > + CPU_GEN_SKX, /* Skylake Xeon */
> > > > > +};
> > > > > +
> > > > > +static struct mfd_cell peci_functions[] = {
> > > > > + {
> > > > > + .name = "peci-cputemp",
> > > > > + .of_compatible = "intel,peci-cputemp",
> > > > > + },
> > > > > + {
> > > > > + .name = "peci-dimmtemp",
> > > > > + .of_compatible = "intel,peci-dimmtemp",
> > > > > + },
> > > > > +};
> > > >
> > > > The more I look at this driver, the less I think it fits into MFD.
> > > >
> > > > What's stopping you from registering these devices directly from DT?
> > > >
> > >
> > > Because DT doesn't allow 2 nodes at the same address so Rob suggested
> > > MFD for this case.
> >
> > Only after I first suggested you create cpu and dimm sensors from a
> > single hwmon driver. Perhaps you should figure out how to fix the
> > problem with delayed registration. Perhaps you can register the
> > sensor, but just delay returning actual data until it is ready.
> >
>
> The actual reason why I divided the single hwmon driver into two is for
> using recommended hwmon API set which doesn't allow incremental
> creation of sysfs attributes at run time - using of
> 'devm_hwmon_device_register_with_info' is suggested by Guenter instead
> of using other deprecated APIs.
>
> The reason why the delayed registration is needed is, BMC kernel cannot
> know how many DIMM are installed in remote machine before the machine
> completing memory training and testing in POST. So dimm temp driver
> cannot create hwmon attributes in advance.
>
> My thought is, this way is the best to address these requirements.
As I've previously explained, I do not think this is a good fit for
MFD. Since this whole PECI piece is a bit, let's say 'niche', perhaps
it's better to contain the client within the PECI subsystem too. You
can then use the platform_device_add() API to register devices as and
when required.
--
Lee Jones [李琼斯]
Linaro Services Technical Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
Powered by blists - more mailing lists