linux-kernel - Re: [PATCH v2 1/6] i2c: designware: use generic table matching

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <44e52856371e4b5c102df8f2efebd527fd26b066.camel@linux.intel.com>
Date:   Tue, 31 Jul 2018 17:02:12 +0300
From:   Andy Shevchenko <andriy.shevchenko@...ux.intel.com>
To:     Alexandre Belloni <alexandre.belloni@...tlin.com>,
        Wolfram Sang <wsa@...-dreams.de>,
        Jarkko Nikula <jarkko.nikula@...ux.intel.com>,
        James Hogan <jhogan@...nel.org>
Cc:     Paul Burton <paul.burton@...s.com>,
        Mika Westerberg <mika.westerberg@...ux.intel.com>,
        linux-i2c@...r.kernel.org, devicetree@...r.kernel.org,
        linux-kernel@...r.kernel.org, linux-mips@...ux-mips.org,
        Thomas Petazzoni <thomas.petazzoni@...tlin.com>,
        Allan Nielsen <allan.nielsen@...rosemi.com>
Subject: Re: [PATCH v2 1/6] i2c: designware: use generic table matching

On Tue, 2018-07-31 at 15:47 +0200, Alexandre Belloni wrote:
> Switch to device_get_match_data in probe to match the device specific
> data
> instead of using the acpi specific function.
> 

Reviewed-by: Andy Shevchenko <andriy.shevchenko@...ux.intel.com>

> Suggested-by: Andy Shevchenko <andriy.shevchenko@...ux.intel.com>
> Signed-off-by: Alexandre Belloni <alexandre.belloni@...tlin.com>
> ---
>  drivers/i2c/busses/i2c-designware-platdrv.c | 6 ++----
>  1 file changed, 2 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c
> b/drivers/i2c/busses/i2c-designware-platdrv.c
> index ddf13527aaee..00bf62f77c47 100644
> --- a/drivers/i2c/busses/i2c-designware-platdrv.c
> +++ b/drivers/i2c/busses/i2c-designware-platdrv.c
> @@ -119,10 +119,6 @@ static int dw_i2c_acpi_configure(struct
> platform_device *pdev)
>  		break;
>  	}
>  
> -	id = acpi_match_device(pdev->dev.driver->acpi_match_table,
> &pdev->dev);
> -	if (id && id->driver_data)
> -		dev->flags |= (u32)id->driver_data;
> -
>  	if (acpi_bus_get_device(handle, &adev))
>  		return -ENODEV;
>  
> @@ -269,6 +265,8 @@ static int dw_i2c_plat_probe(struct
> platform_device *pdev)
>  	else
>  		i2c_parse_fw_timings(&pdev->dev, t, false);
>  
> +	dev->flags |= (u32)device_get_match_data(&pdev->dev);
> +
>  	acpi_speed = i2c_acpi_find_bus_speed(&pdev->dev);
>  	/*
>  	 * Some DSTDs use a non standard speed, round down to the
> lowest

-- 
Andy Shevchenko <andriy.shevchenko@...ux.intel.com>
Intel Finland Oy