linux-kernel - [PATCH v6 1/5] dt-bindings: thermal: qcom-spmi-temp-alarm: Fix documentation of 'reg'

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Date:   Tue, 31 Jul 2018 11:59:13 -0700
From:   Matthias Kaehlcke <mka@...omium.org>
To:     Andy Gross <andy.gross@...aro.org>,
        David Brown <david.brown@...aro.org>,
        Rob Herring <robh+dt@...nel.org>,
        Mark Rutland <mark.rutland@....com>,
        Catalin Marinas <catalin.marinas@....com>,
        Will Deacon <will.deacon@....com>,
        Zhang Rui <rui.zhang@...el.com>,
        Eduardo Valentin <edubezval@...il.com>
Cc:     linux-soc@...r.kernel.org, linux-arm-msm@...r.kernel.org,
        linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
        devicetree@...r.kernel.org, linux-pm@...r.kernel.org,
        David Collins <collinsd@...eaurora.org>,
        Douglas Anderson <dianders@...omium.org>,
        Stephen Boyd <sboyd@...nel.org>,
        Matthias Kaehlcke <mka@...omium.org>
Subject: [PATCH v6 1/5] dt-bindings: thermal: qcom-spmi-temp-alarm: Fix documentation of 'reg'

The documentation claims that the 'reg' property consists of two values,
the SPMI address and the length of the controller's registers. However
the SPMI bus to which it is added specifies "#size-cells = <0>;". Remove
the controller register length from the documentation of the field and the
example.

Signed-off-by: Matthias Kaehlcke <mka@...omium.org>
Reviewed-by: Douglas Anderson <dianders@...omium.org>
---
Changes in v6:
- patch added to the series
---
 .../devicetree/bindings/thermal/qcom-spmi-temp-alarm.txt     | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/Documentation/devicetree/bindings/thermal/qcom-spmi-temp-alarm.txt b/Documentation/devicetree/bindings/thermal/qcom-spmi-temp-alarm.txt
index 290ec06fa33a..86fb41fe772f 100644
--- a/Documentation/devicetree/bindings/thermal/qcom-spmi-temp-alarm.txt
+++ b/Documentation/devicetree/bindings/thermal/qcom-spmi-temp-alarm.txt
@@ -6,8 +6,7 @@ interrupt signal and status register to identify high PMIC die temperature.
 
 Required properties:
 - compatible:      Should contain "qcom,spmi-temp-alarm".
-- reg:             Specifies the SPMI address and length of the controller's
-                   registers.
+- reg:             Specifies the SPMI address.
 - interrupts:      PMIC temperature alarm interrupt.
 - #thermal-sensor-cells: Should be 0. See thermal.txt for a description.
 
@@ -20,7 +19,7 @@ Example:
 
 	pm8941_temp: thermal-alarm@...0 {
 		compatible = "qcom,spmi-temp-alarm";
-		reg = <0x2400 0x100>;
+		reg = <0x2400>;
 		interrupts = <0 0x24 0 IRQ_TYPE_EDGE_RISING>;
 		#thermal-sensor-cells = <0>;
 
-- 
2.18.0.345.g5c9ce644c3-goog