lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <1533141150-10511-26-git-send-email-avienamo@nvidia.com>
Date:   Wed, 1 Aug 2018 19:32:15 +0300
From:   Aapo Vienamo <avienamo@...dia.com>
To:     Rob Herring <robh+dt@...nel.org>,
        Mark Rutland <mark.rutland@....com>,
        Thierry Reding <thierry.reding@...il.com>,
        Jonathan Hunter <jonathanh@...dia.com>,
        Ulf Hansson <ulf.hansson@...aro.org>,
        Adrian Hunter <adrian.hunter@...el.com>,
        Mikko Perttunen <mperttunen@...dia.com>,
        Stefan Agner <stefan@...er.ch>
CC:     <devicetree@...r.kernel.org>, <linux-tegra@...r.kernel.org>,
        <linux-kernel@...r.kernel.org>, <linux-mmc@...r.kernel.org>,
        Aapo Vienamo <avienamo@...dia.com>
Subject: [PATCH 25/40] mmc: sdhci: Add a quirk to disable card clock during tuning

Add a quirk to disable card clock when the tuning command is sent.

This has to be done to prevent the SDHCI controller from hanging on
Tegra210. Without the quirk enabled there appears to be around 10%
chance that the tuning sequence will fail and time out due to the
controller locking up.

Signed-off-by: Aapo Vienamo <avienamo@...dia.com>
---
 drivers/mmc/host/sdhci.c | 15 +++++++++++++++
 drivers/mmc/host/sdhci.h |  2 ++
 2 files changed, 17 insertions(+)

diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index 04dc443..166b16f 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -2175,6 +2175,7 @@ static void sdhci_send_tuning(struct sdhci_host *host, u32 opcode)
 	struct mmc_request mrq = {};
 	unsigned long flags;
 	u32 b = host->sdma_boundary;
+	u16 clk;
 
 	spin_lock_irqsave(&host->lock, flags);
 
@@ -2183,6 +2184,13 @@ static void sdhci_send_tuning(struct sdhci_host *host, u32 opcode)
 	cmd.mrq = &mrq;
 
 	mrq.cmd = &cmd;
+
+	if (host->quirks2 & SDHCI_QUIRK2_TUNE_DIS_CARD_CLK) {
+		clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL);
+		clk &= ~SDHCI_CLOCK_CARD_EN;
+		sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
+	}
+
 	/*
 	 * In response to CMD19, the card sends 64 bytes of tuning
 	 * block to the Host Controller. So we set the block size
@@ -2213,6 +2221,13 @@ static void sdhci_send_tuning(struct sdhci_host *host, u32 opcode)
 	mmiowb();
 	spin_unlock_irqrestore(&host->lock, flags);
 
+	if (host->quirks2 & SDHCI_QUIRK2_TUNE_DIS_CARD_CLK) {
+		udelay(1);
+		clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL);
+		clk |= SDHCI_CLOCK_CARD_EN;
+		sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
+	}
+
 	/* Wait for Buffer Read Ready interrupt */
 	wait_event_timeout(host->buf_ready_int, (host->tuning_done == 1),
 			   msecs_to_jiffies(50));
diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
index 0a99008..cc411b0 100644
--- a/drivers/mmc/host/sdhci.h
+++ b/drivers/mmc/host/sdhci.h
@@ -452,6 +452,8 @@ struct sdhci_host {
 #define SDHCI_QUIRK2_DISABLE_HW_TIMEOUT			(1<<17)
 /* Don't clear the SDHCI_TRANSFER_MODE register on tuning commands */
 #define SDHCI_QUIRK2_TUNE_SKIP_XFERMODE_REG_PROG	(1<<18)
+/* Disable card clock during tuning */
+#define SDHCI_QUIRK2_TUNE_DIS_CARD_CLK			(1<<19)
 
 	int irq;		/* Device IRQ */
 	void __iomem *ioaddr;	/* Mapped address */
-- 
2.7.4

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ