lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Date:   Fri, 3 Aug 2018 20:43:28 +0530
From:   Srinath Mannam <srinath.mannam@...adcom.com>
To:     Adrian Hunter <adrian.hunter@...el.com>
Cc:     Ulf Hansson <ulf.hansson@...aro.org>, Ray Jui <rjui@...adcom.com>,
        Scott Branden <sbranden@...adcom.com>,
        Vikram Prakash <vikram.prakash@...adcom.com>,
        BCM Kernel Feedback <bcm-kernel-feedback-list@...adcom.com>,
        linux-mmc@...r.kernel.org,
        Linux Kernel Mailing List <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH v3 2/2] mmc: host: iproc: Add ACPI support to IPROC SDHCI

Hi Adrian Hunter,

Thank you very much for your review and feedback.

I will do the change and update next patch set.

Regards,
Srinath.

On Fri, Aug 3, 2018 at 6:47 PM, Adrian Hunter <adrian.hunter@...el.com> wrote:
> On 30/07/18 09:15, Srinath Mannam wrote:
>> Add ACPI support to all IPROC SDHCI varients
>>
>> Signed-off-by: Srinath Mannam <srinath.mannam@...adcom.com>
>> Reviewed-by: Ray Jui <ray.jui@...adcom.com>
>> Reviewed-by: Scott Branden <scott.branden@...adcom.com>
>> Reviewed-by: Vladimir Olovyannikov <vladimir.olovyannikov@...adcom.com>
>
> One minor comment below, otherwise:
>
> Acked-by: Adrian Hunter <adrian.hunter@...el.com>
>
>> ---
>>  drivers/mmc/host/Kconfig       |  1 +
>>  drivers/mmc/host/sdhci-iproc.c | 63 +++++++++++++++++++++++++++++-------------
>>  2 files changed, 45 insertions(+), 19 deletions(-)
>>
>> diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
>> index 0581c19..bc6702e 100644
>> --- a/drivers/mmc/host/Kconfig
>> +++ b/drivers/mmc/host/Kconfig
>> @@ -334,6 +334,7 @@ config MMC_SDHCI_IPROC
>>       tristate "SDHCI support for the BCM2835 & iProc SD/MMC Controller"
>>       depends on ARCH_BCM2835 || ARCH_BCM_IPROC || COMPILE_TEST
>>       depends on MMC_SDHCI_PLTFM
>> +     depends on OF || ACPI
>>       default ARCH_BCM_IPROC
>>       select MMC_SDHCI_IO_ACCESSORS
>>       help
>> diff --git a/drivers/mmc/host/sdhci-iproc.c b/drivers/mmc/host/sdhci-iproc.c
>> index d0e83db..abf5269 100644
>> --- a/drivers/mmc/host/sdhci-iproc.c
>> +++ b/drivers/mmc/host/sdhci-iproc.c
>> @@ -15,6 +15,7 @@
>>   * iProc SDHCI platform driver
>>   */
>>
>> +#include <linux/acpi.h>
>>  #include <linux/delay.h>
>>  #include <linux/module.h>
>>  #include <linux/mmc/host.h>
>> @@ -162,9 +163,19 @@ static void sdhci_iproc_writeb(struct sdhci_host *host, u8 val, int reg)
>>       sdhci_iproc_writel(host, newval, reg & ~3);
>>  }
>>
>> +static unsigned int sdhci_iproc_get_max_clock(struct sdhci_host *host)
>> +{
>> +     struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
>> +
>> +     if (pltfm_host->clk)
>> +             return sdhci_pltfm_clk_get_max_clock(host);
>> +     else
>> +             return pltfm_host->clock;
>> +}
>> +
>>  static const struct sdhci_ops sdhci_iproc_ops = {
>>       .set_clock = sdhci_set_clock,
>> -     .get_max_clock = sdhci_pltfm_clk_get_max_clock,
>> +     .get_max_clock = sdhci_iproc_get_max_clock,
>>       .set_bus_width = sdhci_set_bus_width,
>>       .reset = sdhci_reset,
>>       .set_uhs_signaling = sdhci_set_uhs_signaling,
>> @@ -178,7 +189,7 @@ static const struct sdhci_ops sdhci_iproc_32only_ops = {
>>       .write_w = sdhci_iproc_writew,
>>       .write_b = sdhci_iproc_writeb,
>>       .set_clock = sdhci_set_clock,
>> -     .get_max_clock = sdhci_pltfm_clk_get_max_clock,
>> +     .get_max_clock = sdhci_iproc_get_max_clock,
>>       .set_bus_width = sdhci_set_bus_width,
>>       .reset = sdhci_reset,
>>       .set_uhs_signaling = sdhci_set_uhs_signaling,
>> @@ -256,19 +267,29 @@ static const struct of_device_id sdhci_iproc_of_match[] = {
>>  };
>>  MODULE_DEVICE_TABLE(of, sdhci_iproc_of_match);
>>
>> +static const struct acpi_device_id sdhci_iproc_acpi_ids[] = {
>> +     { .id = "BRCM5871", .driver_data = (kernel_ulong_t)&iproc_cygnus_data },
>> +     { .id = "BRCM5872", .driver_data = (kernel_ulong_t)&iproc_data },
>> +     { /* sentinel */ }
>> +};
>> +MODULE_DEVICE_TABLE(acpi, sdhci_iproc_acpi_ids);
>> +
>>  static int sdhci_iproc_probe(struct platform_device *pdev)
>>  {
>> -     const struct of_device_id *match;
>> -     const struct sdhci_iproc_data *iproc_data;
>> +     struct device *dev = &pdev->dev;
>> +     const struct sdhci_iproc_data *iproc_data = NULL;
>>       struct sdhci_host *host;
>>       struct sdhci_iproc_host *iproc_host;
>>       struct sdhci_pltfm_host *pltfm_host;
>>       int ret;
>>
>> -     match = of_match_device(sdhci_iproc_of_match, &pdev->dev);
>> -     if (!match)
>> -             return -EINVAL;
>> -     iproc_data = match->data;
>> +     if (dev->of_node)
>> +             iproc_data = of_device_get_match_data(dev);
>> +     else if (has_acpi_companion(dev))
>> +             iproc_data = acpi_device_get_match_data(dev);
>
> Can you use device_get_match_data() here
>
>> +
>> +     if (!iproc_data)
>> +             return -ENODEV;
>>
>>       host = sdhci_pltfm_init(pdev, iproc_data->pdata, sizeof(*iproc_host));
>>       if (IS_ERR(host))
>> @@ -280,19 +301,21 @@ static int sdhci_iproc_probe(struct platform_device *pdev)
>>       iproc_host->data = iproc_data;
>>
>>       mmc_of_parse(host->mmc);
>> -     sdhci_get_of_property(pdev);
>> +     sdhci_get_property(pdev);
>>
>>       host->mmc->caps |= iproc_host->data->mmc_caps;
>>
>> -     pltfm_host->clk = devm_clk_get(&pdev->dev, NULL);
>> -     if (IS_ERR(pltfm_host->clk)) {
>> -             ret = PTR_ERR(pltfm_host->clk);
>> -             goto err;
>> -     }
>> -     ret = clk_prepare_enable(pltfm_host->clk);
>> -     if (ret) {
>> -             dev_err(&pdev->dev, "failed to enable host clk\n");
>> -             goto err;
>> +     if (dev->of_node) {
>> +             pltfm_host->clk = devm_clk_get(dev, NULL);
>> +             if (IS_ERR(pltfm_host->clk)) {
>> +                     ret = PTR_ERR(pltfm_host->clk);
>> +                     goto err;
>> +             }
>> +             ret = clk_prepare_enable(pltfm_host->clk);
>> +             if (ret) {
>> +                     dev_err(dev, "failed to enable host clk\n");
>> +                     goto err;
>> +             }
>>       }
>>
>>       if (iproc_host->data->pdata->quirks & SDHCI_QUIRK_MISSING_CAPS) {
>> @@ -307,7 +330,8 @@ static int sdhci_iproc_probe(struct platform_device *pdev)
>>       return 0;
>>
>>  err_clk:
>> -     clk_disable_unprepare(pltfm_host->clk);
>> +     if (dev->of_node)
>> +             clk_disable_unprepare(pltfm_host->clk);
>>  err:
>>       sdhci_pltfm_free(pdev);
>>       return ret;
>> @@ -317,6 +341,7 @@ static struct platform_driver sdhci_iproc_driver = {
>>       .driver = {
>>               .name = "sdhci-iproc",
>>               .of_match_table = sdhci_iproc_of_match,
>> +             .acpi_match_table = ACPI_PTR(sdhci_iproc_acpi_ids),
>>               .pm = &sdhci_pltfm_pmops,
>>       },
>>       .probe = sdhci_iproc_probe,
>>
>

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ