linux-kernel - [PATCH 2/7] ARM: dts: sun8i: h3: Add thermal sensor controller node

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20180804070355.14857-2-manu@freebsd.org>
Date:   Sat,  4 Aug 2018 09:03:50 +0200
From:   Emmanuel Vadot <manu@...ebsd.org>
To:     rui.zhang@...el.com, edubezval@...il.com, robh+dt@...nel.org,
        mark.rutland@....com, maxime.ripard@...tlin.com, wens@...e.org,
        catalin.marinas@....com, will.deacon@....com
Cc:     linux-pm@...r.kernel.org, devicetree@...r.kernel.org,
        linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
        Emmanuel Vadot <manu@...ebsd.org>
Subject: [PATCH 2/7] ARM: dts: sun8i: h3: Add thermal sensor controller node

This add the ths controller for the H3 and the nvmem cell for the
calibration data on the sid node.

Signed-off-by: Emmanuel Vadot <manu@...ebsd.org>
---
 arch/arm/boot/dts/sun8i-h3.dtsi | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)

diff --git a/arch/arm/boot/dts/sun8i-h3.dtsi b/arch/arm/boot/dts/sun8i-h3.dtsi
index 281038a7d7b4..fcfcd50b398a 100644
--- a/arch/arm/boot/dts/sun8i-h3.dtsi
+++ b/arch/arm/boot/dts/sun8i-h3.dtsi
@@ -145,6 +145,25 @@
 		sid: eeprom@...4000 {
 			compatible = "allwinner,sun8i-h3-sid";
 			reg = <0x1c14000 0x400>;
+
+			ths_calib: calib@234 {
+				reg = <0x234 0x2>;
+			};
+		};
+
+		ths: thermal_sensor@...5000 {
+			compatible = "allwinner,sun8i-h3-ths";
+			reg = <0x01c25000 0x100>;
+			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_THS>, <&ccu CLK_THS>;
+			clock-names = "apb", "ths";
+			resets = <&ccu RST_BUS_THS>;
+			reset-names = "apb";
+			#thermal-sensor-cells = <0>;
+			status = "disabled";
+
+			nvmem-cells = <&ths_calib>;
+			nvmem-cell-names = "ths-calib";
 		};
 
 		mali: gpu@...0000 {
-- 
2.18.0