lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <a1551bbbb018ebe9526f7367aef536ae26bdc256.1533583611.git.leonard.crestez@nxp.com>
Date:   Mon,  6 Aug 2018 22:31:07 +0300
From:   Leonard Crestez <leonard.crestez@....com>
To:     Stefan Agner <stefan@...er.ch>,
        Philipp Zabel <p.zabel@...gutronix.de>,
        Marek Vasut <marex@...x.de>
Cc:     Shawn Guo <shawnguo@...nel.org>,
        Fabio Estevam <fabio.estevam@....com>,
        Robert Chiras <robert.chiras@....com>,
        Mirela Rabulea <mirela.rabulea@....com>,
        Anson Huang <Anson.Huang@....com>,
        dri-devel@...ts.freedesktop.org,
        Dong Aisheng <aisheng.dong@....com>, linux-imx@....com,
        kernel@...gutronix.de, linux-kernel@...r.kernel.org
Subject: [PATCH v3 1/4] drm/mxsfb: Fix initial corrupt frame when activating display

LCDIF will repeatedly display data from CUR_BUF and set CUR_BUF to
NEXT_BUF when done. Since we are only ever writing to NEXT_BUF the
display will show an initial corrupt frame.

Fix by writing the FB paddr to both CUR_BUF and NEXT_BUF when
activating the CRTC.

Signed-off-by: Leonard Crestez <leonard.crestez@....com>
---
 drivers/gpu/drm/mxsfb/mxsfb_crtc.c | 42 +++++++++++++++++++++---------
 1 file changed, 29 insertions(+), 13 deletions(-)

diff --git a/drivers/gpu/drm/mxsfb/mxsfb_crtc.c b/drivers/gpu/drm/mxsfb/mxsfb_crtc.c
index 0abe77675b76..db3ff5bde122 100644
--- a/drivers/gpu/drm/mxsfb/mxsfb_crtc.c
+++ b/drivers/gpu/drm/mxsfb/mxsfb_crtc.c
@@ -194,15 +194,31 @@ static int mxsfb_reset_block(void __iomem *reset_addr)
 		return ret;
 
 	return clear_poll_bit(reset_addr, MODULE_CLKGATE);
 }
 
+static dma_addr_t mxsfb_get_fb_paddr(struct mxsfb_drm_private *mxsfb)
+{
+	struct drm_framebuffer *fb = mxsfb->pipe.plane.state->fb;
+	struct drm_gem_cma_object *gem;
+
+	if (!fb)
+		return 0;
+
+	gem = drm_fb_cma_get_gem_obj(fb, 0);
+	if (!gem)
+		return 0;
+
+	return gem->paddr;
+}
+
 static void mxsfb_crtc_mode_set_nofb(struct mxsfb_drm_private *mxsfb)
 {
 	struct drm_display_mode *m = &mxsfb->pipe.crtc.state->adjusted_mode;
 	const u32 bus_flags = mxsfb->connector.display_info.bus_flags;
 	u32 vdctrl0, vsync_pulse_len, hsync_pulse_len;
+	dma_addr_t paddr;
 	int err;
 
 	/*
 	 * It seems, you can't re-program the controller if it is still
 	 * running. This may lead to shifted pictures (FIFO issue?), so
@@ -268,10 +284,16 @@ static void mxsfb_crtc_mode_set_nofb(struct mxsfb_drm_private *mxsfb)
 	       mxsfb->base + LCDC_VDCTRL3);
 
 	writel(SET_DOTCLK_H_VALID_DATA_CNT(m->hdisplay),
 	       mxsfb->base + LCDC_VDCTRL4);
 
+	/* Update cur_buf as well to avoid an initial corrupt frame */
+	paddr = mxsfb_get_fb_paddr(mxsfb);
+	if (paddr) {
+		writel(paddr, mxsfb->base + mxsfb->devdata->cur_buf);
+		writel(paddr, mxsfb->base + mxsfb->devdata->next_buf);
+	}
 	mxsfb_disable_axi_clk(mxsfb);
 }
 
 void mxsfb_crtc_enable(struct mxsfb_drm_private *mxsfb)
 {
@@ -287,16 +309,12 @@ void mxsfb_crtc_disable(struct mxsfb_drm_private *mxsfb)
 void mxsfb_plane_atomic_update(struct mxsfb_drm_private *mxsfb,
 			       struct drm_plane_state *state)
 {
 	struct drm_simple_display_pipe *pipe = &mxsfb->pipe;
 	struct drm_crtc *crtc = &pipe->crtc;
-	struct drm_framebuffer *fb = pipe->plane.state->fb;
 	struct drm_pending_vblank_event *event;
-	struct drm_gem_cma_object *gem;
-
-	if (!crtc)
-		return;
+	dma_addr_t paddr;
 
 	spin_lock_irq(&crtc->dev->event_lock);
 	event = crtc->state->event;
 	if (event) {
 		crtc->state->event = NULL;
@@ -307,14 +325,12 @@ void mxsfb_plane_atomic_update(struct mxsfb_drm_private *mxsfb,
 			drm_crtc_send_vblank_event(crtc, event);
 		}
 	}
 	spin_unlock_irq(&crtc->dev->event_lock);
 
-	if (!fb)
-		return;
-
-	gem = drm_fb_cma_get_gem_obj(fb, 0);
-
-	mxsfb_enable_axi_clk(mxsfb);
-	writel(gem->paddr, mxsfb->base + mxsfb->devdata->next_buf);
-	mxsfb_disable_axi_clk(mxsfb);
+	paddr = mxsfb_get_fb_paddr(mxsfb);
+	if (paddr) {
+		mxsfb_enable_axi_clk(mxsfb);
+		writel(paddr, mxsfb->base + mxsfb->devdata->next_buf);
+		mxsfb_disable_axi_clk(mxsfb);
+	}
 }
-- 
2.17.1

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ