| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Tue, 7 Aug 2018 12:38:37 +0530
From: Jagan Teki <jagan@...rulasolutions.com>
To: Shawn Guo <shawnguo@...nel.org>
Cc: linux-arm-kernel@...ts.infradead.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, Sascha Hauer <kernel@...gutronix.de>,
Fabio Estevam <fabio.estevam@....com>,
Matteo Lisi <matteo.lisi@...icam.com>,
Michael Trimarchi <michael@...rulasolutions.com>,
Jagan Teki <jagan@...rulasolutions.com>
Subject: [PATCH 2/3] ARM: dts: imx6ul-isiot: Move node definitions into dtsi
Move usdhc2 and gpmi along with pinctrl nodes on
imx6ul-isiot.dtsi from dts files and mark it as 'disabled'
and the relevant dts will enable the status as 'okay'
Signed-off-by: Jagan Teki <jagan@...rulasolutions.com>
---
arch/arm/boot/dts/imx6ul-isiot-emmc.dts | 23 -----------
arch/arm/boot/dts/imx6ul-isiot-nand.dts | 25 ------------
arch/arm/boot/dts/imx6ul-isiot.dtsi | 52 +++++++++++++++++++++++++
3 files changed, 52 insertions(+), 48 deletions(-)
diff --git a/arch/arm/boot/dts/imx6ul-isiot-emmc.dts b/arch/arm/boot/dts/imx6ul-isiot-emmc.dts
index 464bd21930fd..1df3e376ae2c 100644
--- a/arch/arm/boot/dts/imx6ul-isiot-emmc.dts
+++ b/arch/arm/boot/dts/imx6ul-isiot-emmc.dts
@@ -14,28 +14,5 @@
};
&usdhc2 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usdhc2>;
- cd-gpios = <&gpio4 5 GPIO_ACTIVE_LOW>;
- bus-width = <8>;
- no-1-8-v;
status = "okay";
};
-
-&iomuxc {
- pinctrl_usdhc2: usdhc2grp {
- fsl,pins = <
- MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x17070
- MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x10070
- MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x17070
- MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x17070
- MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x17070
- MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x17070
- MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x17070
- MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x17070
- MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x17070
- MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x17070
- MX6UL_PAD_NAND_ALE__USDHC2_RESET_B 0x17070
- >;
- };
-};
diff --git a/arch/arm/boot/dts/imx6ul-isiot-nand.dts b/arch/arm/boot/dts/imx6ul-isiot-nand.dts
index 84420ed47106..8c26d4d1a7bf 100644
--- a/arch/arm/boot/dts/imx6ul-isiot-nand.dts
+++ b/arch/arm/boot/dts/imx6ul-isiot-nand.dts
@@ -14,30 +14,5 @@
};
&gpmi {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_gpmi_nand>;
- nand-on-flash-bbt;
status = "okay";
};
-
-&iomuxc {
- pinctrl_gpmi_nand: gpmi-nand {
- fsl,pins = <
- MX6UL_PAD_NAND_CLE__RAWNAND_CLE 0xb0b1
- MX6UL_PAD_NAND_ALE__RAWNAND_ALE 0xb0b1
- MX6UL_PAD_NAND_WP_B__RAWNAND_WP_B 0xb0b1
- MX6UL_PAD_NAND_READY_B__RAWNAND_READY_B 0xb000
- MX6UL_PAD_NAND_CE0_B__RAWNAND_CE0_B 0xb0b1
- MX6UL_PAD_NAND_RE_B__RAWNAND_RE_B 0xb0b1
- MX6UL_PAD_NAND_WE_B__RAWNAND_WE_B 0xb0b1
- MX6UL_PAD_NAND_DATA00__RAWNAND_DATA00 0xb0b1
- MX6UL_PAD_NAND_DATA01__RAWNAND_DATA01 0xb0b1
- MX6UL_PAD_NAND_DATA02__RAWNAND_DATA02 0xb0b1
- MX6UL_PAD_NAND_DATA03__RAWNAND_DATA03 0xb0b1
- MX6UL_PAD_NAND_DATA04__RAWNAND_DATA04 0xb0b1
- MX6UL_PAD_NAND_DATA05__RAWNAND_DATA05 0xb0b1
- MX6UL_PAD_NAND_DATA06__RAWNAND_DATA06 0xb0b1
- MX6UL_PAD_NAND_DATA07__RAWNAND_DATA07 0xb0b1
- >;
- };
-};
diff --git a/arch/arm/boot/dts/imx6ul-isiot.dtsi b/arch/arm/boot/dts/imx6ul-isiot.dtsi
index ba66225fe86e..fe435484e69d 100644
--- a/arch/arm/boot/dts/imx6ul-isiot.dtsi
+++ b/arch/arm/boot/dts/imx6ul-isiot.dtsi
@@ -97,6 +97,13 @@
};
};
+&gpmi {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpmi_nand>;
+ nand-on-flash-bbt;
+ status = "disabled";
+};
+
&i2c1 {
clock-frequency = <100000>;
pinctrl-names = "default";
@@ -207,6 +214,15 @@
status = "okay";
};
+&usdhc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc2>;
+ cd-gpios = <&gpio4 5 GPIO_ACTIVE_LOW>;
+ bus-width = <8>;
+ no-1-8-v;
+ status = "disabled";
+};
+
&iomuxc {
pinctrl_enet1: enet1grp {
fsl,pins = <
@@ -223,6 +239,26 @@
>;
};
+ pinctrl_gpmi_nand: gpmi-nand {
+ fsl,pins = <
+ MX6UL_PAD_NAND_CLE__RAWNAND_CLE 0xb0b1
+ MX6UL_PAD_NAND_ALE__RAWNAND_ALE 0xb0b1
+ MX6UL_PAD_NAND_WP_B__RAWNAND_WP_B 0xb0b1
+ MX6UL_PAD_NAND_READY_B__RAWNAND_READY_B 0xb000
+ MX6UL_PAD_NAND_CE0_B__RAWNAND_CE0_B 0xb0b1
+ MX6UL_PAD_NAND_RE_B__RAWNAND_RE_B 0xb0b1
+ MX6UL_PAD_NAND_WE_B__RAWNAND_WE_B 0xb0b1
+ MX6UL_PAD_NAND_DATA00__RAWNAND_DATA00 0xb0b1
+ MX6UL_PAD_NAND_DATA01__RAWNAND_DATA01 0xb0b1
+ MX6UL_PAD_NAND_DATA02__RAWNAND_DATA02 0xb0b1
+ MX6UL_PAD_NAND_DATA03__RAWNAND_DATA03 0xb0b1
+ MX6UL_PAD_NAND_DATA04__RAWNAND_DATA04 0xb0b1
+ MX6UL_PAD_NAND_DATA05__RAWNAND_DATA05 0xb0b1
+ MX6UL_PAD_NAND_DATA06__RAWNAND_DATA06 0xb0b1
+ MX6UL_PAD_NAND_DATA07__RAWNAND_DATA07 0xb0b1
+ >;
+ };
+
pinctrl_i2c1: i2c1grp {
fsl,pins = <
MX6UL_PAD_UART4_TX_DATA__I2C1_SCL 0x4001b8b0
@@ -330,4 +366,20 @@
MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170f9
>;
};
+
+ pinctrl_usdhc2: usdhc2grp {
+ fsl,pins = <
+ MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x17070
+ MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x10070
+ MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x17070
+ MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x17070
+ MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x17070
+ MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x17070
+ MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x17070
+ MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x17070
+ MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x17070
+ MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x17070
+ MX6UL_PAD_NAND_ALE__USDHC2_RESET_B 0x17070
+ >;
+ };
};
--
2.18.0.321.gffc6fa0e3
Powered by blists - more mailing lists