linux-kernel - Re: [RFT 4/4] ARM: dts: exynos: Add LDO28 regulator on Exynos5422 Odroid boards

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20180807105950eucas1p1e48a3d064afb4d601fa33eeb67f0ba02~IlRTyxXuT0840608406eucas1p1t@eucas1p1.samsung.com>
Date:   Tue, 7 Aug 2018 12:59:48 +0200
From:   Marek Szyprowski <m.szyprowski@...sung.com>
To:     Krzysztof Kozlowski <krzk@...nel.org>,
        Rob Herring <robh+dt@...nel.org>,
        Mark Rutland <mark.rutland@....com>,
        Kukjin Kim <kgene@...nel.org>, devicetree@...r.kernel.org,
        linux-arm-kernel@...ts.infradead.org,
        linux-samsung-soc@...r.kernel.org, linux-kernel@...r.kernel.org
Cc:     Bartlomiej Zolnierkiewicz <b.zolnierkie@...sung.com>,
        Chanwoo Choi <cw00.choi@...sung.com>
Subject: Re: [RFT 4/4] ARM: dts: exynos: Add LDO28 regulator on Exynos5422
 Odroid boards

Hi Krzysztof,

On 2018-08-06 18:09, Krzysztof Kozlowski wrote:
> The LDO28 is used only on Odroid XU3 for Display Port.  Define it so DTS
> will describe entire hardware.
>
> Depending on bootloader behavior this might affect the Display Port
> because none of drivers are enabling it. By default it is off in S2MPS11
> PMIC reset values.  However it could be enabled by bootloader so in such
> case kernel will later disable it as unused regulator.
>
> Signed-off-by: Krzysztof Kozlowski <krzk@...nel.org>

Odroid XU3 boots fine with this patch. Display Port is not yet enabled in
mainline for OdroidXU3, so there is not much else to test for now.

Tested-by: Marek Szyprowski <m.szyprowski@...sung.com>

> ---
>
> Not tested on Odroid XU3 with Display Port.
> ---
>   arch/arm/boot/dts/exynos5422-odroid-core.dtsi | 7 +++++++
>   arch/arm/boot/dts/exynos5422-odroidxu3.dts    | 6 ++++++
>   2 files changed, 13 insertions(+)
>
> diff --git a/arch/arm/boot/dts/exynos5422-odroid-core.dtsi b/arch/arm/boot/dts/exynos5422-odroid-core.dtsi
> index b0dc9cc81b94..178e1064cfc7 100644
> --- a/arch/arm/boot/dts/exynos5422-odroid-core.dtsi
> +++ b/arch/arm/boot/dts/exynos5422-odroid-core.dtsi
> @@ -331,6 +331,13 @@
>   				regulator-always-on;
>   			};
>   
> +			ldo28_reg: LDO28 {
> +				/* Used on XU3 */
> +				regulator-name = "vdd_ldo26";
> +				regulator-min-microvolt = <800000>;
> +				regulator-max-microvolt = <3950000>;
> +			};
> +
>   			ldo29_reg: LDO29 {
>   				/* Unused */
>   				regulator-name = "vdd_ldo29";
> diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3.dts b/arch/arm/boot/dts/exynos5422-odroidxu3.dts
> index 0322f281912c..db0bc17a667b 100644
> --- a/arch/arm/boot/dts/exynos5422-odroidxu3.dts
> +++ b/arch/arm/boot/dts/exynos5422-odroidxu3.dts
> @@ -49,6 +49,12 @@
>   	};
>   };
>   
> +&ldo28_reg {
> +	regulator-name = "dp_p3v3";
> +	regulator-min-microvolt = <3300000>;
> +	regulator-max-microvolt = <3300000>;
> +};
> +
>   &pwm {
>   	/*
>   	 * PWM 0 -- fan

Best regards
-- 
Marek Szyprowski, PhD
Samsung R&D Institute Poland