[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <1533810630-17673-2-git-send-email-stelford@cadence.com>
Date: Thu, 9 Aug 2018 11:30:29 +0100
From: Scott Telford <stelford@...ence.com>
To: <dkos@...ence.com>, <adouglas@...ence.com>, <kishon@...com>,
<jbergsagel@...com>, <linux-kernel@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>
CC: Scott Telford <stelford@...ence.com>
Subject: [PATCH v4 1/2] dt-bindings: phy: Document Cadence MHDP DisplayPort PHY bindings
Signed-off-by: Scott Telford <stelford@...ence.com>
---
.../devicetree/bindings/phy/phy-cadence-dp.txt | 30 ++++++++++++++++++++++
1 file changed, 30 insertions(+)
create mode 100644 Documentation/devicetree/bindings/phy/phy-cadence-dp.txt
diff --git a/Documentation/devicetree/bindings/phy/phy-cadence-dp.txt b/Documentation/devicetree/bindings/phy/phy-cadence-dp.txt
new file mode 100644
index 0000000..7f49fd54e
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/phy-cadence-dp.txt
@@ -0,0 +1,30 @@
+Cadence MHDP DisplayPort SD0801 PHY binding
+===========================================
+
+This binding describes the Cadence SD0801 PHY hardware included with
+the Cadence MHDP DisplayPort controller.
+
+-------------------------------------------------------------------------------
+Required properties (controller (parent) node):
+- compatible : Should be "cdns,dp-phy"
+- reg : Defines the following sets of registers in the parent
+ mhdp device:
+ - Offset of the DPTX PHY configuration registers
+ - Offset of the SD0801 PHY configuration registers
+- #phy-cells : from the generic PHY bindings, must be 0.
+
+Optional properties:
+- num_lanes : Number of DisplayPort lanes to use (1, 2 or 4)
+- max_bit_rate : Maximum DisplayPort link bit rate to use, in Mbps (2160,
+ 2430, 2700, 3240, 4320, 5400 or 8100)
+-------------------------------------------------------------------------------
+
+Example:
+ dp_phy: phy@...b030a00 {
+ compatible = "cdns,dp-phy";
+ reg = <0xf0 0xfb030a00 0x0 0x00000040>,
+ <0xf0 0xfb500000 0x0 0x00100000>;
+ num_lanes = <4>;
+ max_bit_rate = <8100>;
+ #phy-cells = <0>;
+ };
--
2.2.2
Powered by blists - more mailing lists