| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1533819299-3401-4-git-send-email-srinath.mannam@broadcom.com>
Date: Thu, 9 Aug 2018 18:24:59 +0530
From: Srinath Mannam <srinath.mannam@...adcom.com>
To: Zhang Rui <rui.zhang@...el.com>,
Eduardo Valentin <edubezval@...il.com>,
Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>
Cc: devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
bcm-kernel-feedback-list@...adcom.com,
Pramod Kumar <pramod.kumar@...adcom.com>,
Srinath Mannam <srinath.mannam@...adcom.com>
Subject: [PATCH v3 3/3] thermal: broadcom: Add Stingray thermal driver
From: Pramod Kumar <pramod.kumar@...adcom.com>
Adds stingray thermal driver to monitor six
thermal zones temperature and trips at critical temperature.
Signed-off-by: Pramod Kumar <pramod.kumar@...adcom.com>
Signed-off-by: Srinath Mannam <srinath.mannam@...adcom.com>
Reviewed-by: Ray Jui <ray.jui@...adcom.com>
Reviewed-by: Scott Branden <scott.branden@...adcom.com>
Reviewed-by: Vikram Prakash <vikram.prakash@...adcom.com>
---
drivers/thermal/Kconfig | 3 +-
drivers/thermal/broadcom/Kconfig | 9 ++
drivers/thermal/broadcom/Makefile | 1 +
drivers/thermal/broadcom/sr-thermal.c | 216 ++++++++++++++++++++++++++++++++++
4 files changed, 228 insertions(+), 1 deletion(-)
create mode 100644 drivers/thermal/broadcom/sr-thermal.c
diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig
index 8297988..26d39d4 100644
--- a/drivers/thermal/Kconfig
+++ b/drivers/thermal/Kconfig
@@ -416,7 +416,8 @@ config MTK_THERMAL
controller present in Mediatek SoCs
menu "Broadcom thermal drivers"
-depends on ARCH_BCM || ARCH_BRCMSTB || ARCH_BCM2835 || COMPILE_TEST
+depends on ARCH_BCM || ARCH_BRCMSTB || ARCH_BCM2835 || ARCH_BCM_IPROC || \
+ COMPILE_TEST
source "drivers/thermal/broadcom/Kconfig"
endmenu
diff --git a/drivers/thermal/broadcom/Kconfig b/drivers/thermal/broadcom/Kconfig
index c106a15..dc9a9bd 100644
--- a/drivers/thermal/broadcom/Kconfig
+++ b/drivers/thermal/broadcom/Kconfig
@@ -22,3 +22,12 @@ config BCM_NS_THERMAL
BCM4708, BCM4709, BCM5301x, BCM95852X, etc). It contains DMU (Device
Management Unit) block with a thermal sensor that allows checking CPU
temperature.
+
+config BCM_SR_THERMAL
+ tristate "Stingray thermal driver"
+ depends on ARCH_BCM_IPROC || COMPILE_TEST
+ default ARCH_BCM_IPROC
+ help
+ Support for the Stingray family of SoCs. Its different blocks like
+ iHost, CRMU and NITRO has thermal sensor that allows checking its
+ temperature.
diff --git a/drivers/thermal/broadcom/Makefile b/drivers/thermal/broadcom/Makefile
index fae10ec..79df69e 100644
--- a/drivers/thermal/broadcom/Makefile
+++ b/drivers/thermal/broadcom/Makefile
@@ -1,3 +1,4 @@
obj-$(CONFIG_BCM2835_THERMAL) += bcm2835_thermal.o
obj-$(CONFIG_BRCMSTB_THERMAL) += brcmstb_thermal.o
obj-$(CONFIG_BCM_NS_THERMAL) += ns-thermal.o
+obj-$(CONFIG_BCM_SR_THERMAL) += sr-thermal.o
diff --git a/drivers/thermal/broadcom/sr-thermal.c b/drivers/thermal/broadcom/sr-thermal.c
new file mode 100644
index 0000000..909f80c
--- /dev/null
+++ b/drivers/thermal/broadcom/sr-thermal.c
@@ -0,0 +1,216 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2018 Broadcom
+ */
+
+#include <linux/acpi.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+#include <linux/thermal.h>
+
+#define TMON_CRIT_TEMP 105000 /* temp in millidegree C */
+#define SR_TMON_MAX_LIST 6
+
+/*
+ * In stingray thermal IO memory,
+ * Total Number of available TMONs MASK is at offset 0
+ * temperature registers BASE is at 4 byte offset.
+ * Each TMON temperature register size is 4.
+ */
+#define SR_TMON_TEMP_BASE(id) ((id) * 0x4)
+
+static const char * const sr_tmon_names[SR_TMON_MAX_LIST] = {
+ "sr_tmon_ihost0",
+ "sr_tmon_ihost1",
+ "sr_tmon_ihost2",
+ "sr_tmon_ihost3",
+ "sr_tmon_crmu",
+ "sr_tmon_nitro",
+};
+
+struct sr_tmon {
+ struct thermal_zone_device *tz;
+ unsigned int crit_temp;
+ unsigned int tmon_id;
+ struct sr_thermal *priv;
+};
+
+struct sr_thermal {
+ struct device *dev;
+ void __iomem *regs;
+ struct sr_tmon tmon[SR_TMON_MAX_LIST];
+};
+
+static int sr_get_temp(struct thermal_zone_device *tz, int *temp)
+{
+ struct sr_tmon *tmon = tz->devdata;
+ struct sr_thermal *sr_thermal = tmon->priv;
+
+ *temp = readl(sr_thermal->regs + SR_TMON_TEMP_BASE(tmon->tmon_id));
+
+ return 0;
+}
+
+static int sr_get_trip_type(struct thermal_zone_device *tz, int trip,
+ enum thermal_trip_type *type)
+{
+ struct sr_tmon *tmon = tz->devdata;
+ struct sr_thermal *sr_thermal = tmon->priv;
+
+ switch (trip) {
+ case 0:
+ *type = THERMAL_TRIP_CRITICAL;
+ break;
+ default:
+ dev_dbg(sr_thermal->dev,
+ "Driver does not support more than 1 trip point\n");
+ return -EINVAL;
+ }
+ return 0;
+}
+
+static int sr_get_trip_temp(struct thermal_zone_device *tz, int trip, int *temp)
+{
+ struct sr_tmon *tmon = tz->devdata;
+ struct sr_thermal *sr_thermal = tmon->priv;
+
+ switch (trip) {
+ case 0:
+ *temp = tmon->crit_temp;
+ break;
+ default:
+ dev_dbg(sr_thermal->dev,
+ "Driver does not support more than 1 trip point\n");
+ return -EINVAL;
+ }
+ return 0;
+}
+
+static int sr_set_trip_temp(struct thermal_zone_device *tz, int trip, int temp)
+{
+ struct sr_tmon *tmon = tz->devdata;
+
+ switch (trip) {
+ case 0:
+ /*
+ * Allow the user to change critical temperature
+ * as per their requirement, could be for debug
+ * purpose, even if it's more than the recommended
+ * critical temperature.
+ */
+ tmon->crit_temp = temp;
+ break;
+ default:
+ return -EINVAL;
+ }
+ return 0;
+}
+
+static struct thermal_zone_device_ops sr_thermal_ops = {
+ .get_temp = sr_get_temp,
+ .get_trip_type = sr_get_trip_type,
+ .get_trip_temp = sr_get_trip_temp,
+ .set_trip_temp = sr_set_trip_temp,
+};
+
+static int sr_thermal_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct sr_thermal *sr_thermal;
+ struct sr_tmon *tmon;
+ struct resource *res;
+ uint32_t sr_tmon_list = 0;
+ unsigned int i;
+ int ret;
+
+ sr_thermal = devm_kzalloc(dev, sizeof(*sr_thermal), GFP_KERNEL);
+ if (!sr_thermal)
+ return -ENOMEM;
+
+ sr_thermal->dev = dev;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ sr_thermal->regs = (void __iomem *)devm_memremap(&pdev->dev, res->start,
+ resource_size(res), MEMREMAP_WB);
+ if (IS_ERR(sr_thermal->regs)) {
+ dev_err(dev, "failed to get io address\n");
+ return PTR_ERR(sr_thermal->regs);
+ }
+
+ ret = device_property_read_u32(dev, "brcm,tmon-mask", &sr_tmon_list);
+ if (ret)
+ return ret;
+
+ for (i = 0; i < SR_TMON_MAX_LIST; i++) {
+
+ if (!(sr_tmon_list & BIT(i)))
+ continue;
+
+ /* Flush temperature registers */
+ writel(0, sr_thermal->regs + SR_TMON_TEMP_BASE(i));
+ tmon = &sr_thermal->tmon[i];
+ tmon->crit_temp = TMON_CRIT_TEMP;
+ tmon->tmon_id = i;
+ tmon->priv = sr_thermal;
+ tmon->tz = thermal_zone_device_register(sr_tmon_names[i],
+ 1, 1,
+ tmon,
+ &sr_thermal_ops,
+ NULL, 1000, 1000);
+ if (IS_ERR(tmon->tz))
+ goto err_exit;
+
+ dev_info(dev, "%s: registered\n", sr_tmon_names[i]);
+ }
+ platform_set_drvdata(pdev, sr_thermal);
+
+ return 0;
+
+err_exit:
+ while (--i >= 0) {
+ if (sr_thermal->tmon[i].tz)
+ thermal_zone_device_unregister(sr_thermal->tmon[i].tz);
+ }
+
+ return PTR_ERR(tmon->tz);
+}
+
+static int sr_thermal_remove(struct platform_device *pdev)
+{
+ struct sr_thermal *sr_thermal = platform_get_drvdata(pdev);
+ unsigned int i;
+
+ for (i = 0; i < SR_TMON_MAX_LIST; i++)
+ if (sr_thermal->tmon[i].tz)
+ thermal_zone_device_unregister(sr_thermal->tmon[i].tz);
+
+ return 0;
+}
+
+static const struct of_device_id sr_thermal_of_match[] = {
+ { .compatible = "brcm,sr-thermal", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, sr_thermal_of_match);
+
+static const struct acpi_device_id sr_thermal_acpi_ids[] = {
+ { .id = "BRCM0500" },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(acpi, sr_thermal_acpi_ids);
+
+static struct platform_driver sr_thermal_driver = {
+ .probe = sr_thermal_probe,
+ .remove = sr_thermal_remove,
+ .driver = {
+ .name = "sr-thermal",
+ .of_match_table = sr_thermal_of_match,
+ .acpi_match_table = ACPI_PTR(sr_thermal_acpi_ids),
+ },
+};
+module_platform_driver(sr_thermal_driver);
+
+MODULE_AUTHOR("Pramod Kumar <pramod.kumar@...adcom.com>");
+MODULE_DESCRIPTION("Stingray thermal driver");
+MODULE_LICENSE("GPL v2");
--
2.7.4
Powered by blists - more mailing lists