[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <7f2ac80d-d4b8-ce46-0f1f-8e62f8868a61@codeaurora.org>
Date: Fri, 10 Aug 2018 13:39:21 +0530
From: Taniya Das <tdas@...eaurora.org>
To: Douglas Anderson <dianders@...omium.org>, sboyd@...nel.org,
andy.gross@...aro.org
Cc: girishm@...eaurora.org, linux-arm-msm@...r.kernel.org,
anischal@...eaurora.org, bjorn.andersson@...aro.org,
grahamr@...eaurora.org, linux-soc@...r.kernel.org,
linux-clk@...r.kernel.org,
Michael Turquette <mturquette@...libre.com>,
linux-kernel@...r.kernel.org, David Brown <david.brown@...aro.org>
Subject: Re: [PATCH v3 2/2] clk: qcom: Add qspi (Quad SPI) clocks for sdm845
On 7/24/2018 11:15 PM, Douglas Anderson wrote:
> Add both the interface and core clock.
>
> Signed-off-by: Douglas Anderson <dianders@...omium.org>
> (am from https://lore.kernel.org/patchwork/patch/966680/mbox)
>
> ---
>
> Changes in v3:
> - Removed gcc_parent_names_9 which I had left in (doh!).
>
> Changes in v2:
> - Only 19.2, 100, 150, and 300 MHz now.
> - All clocks come from MAIN rather than EVEN.
> - Use parent map 0 instead of new parent map 9.
>
> drivers/clk/qcom/gcc-sdm845.c | 56 +++++++++++++++++++++++++++++++++++
> 1 file changed, 56 insertions(+)
>
> diff --git a/drivers/clk/qcom/gcc-sdm845.c b/drivers/clk/qcom/gcc-sdm845.c
> index 0f694ed4238a..fc1c6658ad82 100644
> --- a/drivers/clk/qcom/gcc-sdm845.c
> +++ b/drivers/clk/qcom/gcc-sdm845.c
> @@ -358,6 +358,28 @@ static struct clk_rcg2 gcc_pcie_phy_refgen_clk_src = {
> },
> };
>
> +static const struct freq_tbl ftbl_gcc_qspi_core_clk_src[] = {
> + F(19200000, P_BI_TCXO, 1, 0, 0),
> + F(100000000, P_GPLL0_OUT_MAIN, 6, 0, 0),
> + F(150000000, P_GPLL0_OUT_MAIN, 4, 0, 0),
> + F(300000000, P_GPLL0_OUT_MAIN, 2, 0, 0),
> + { }
> +};
> +
> +static struct clk_rcg2 gcc_qspi_core_clk_src = {
> + .cmd_rcgr = 0x4b008,
> + .mnd_width = 0,
> + .hid_width = 5,
> + .parent_map = gcc_parent_map_0,
> + .freq_tbl = ftbl_gcc_qspi_core_clk_src,
> + .clkr.hw.init = &(struct clk_init_data){
> + .name = "gcc_qspi_core_clk_src",
> + .parent_names = gcc_parent_names_0,
> + .num_parents = 4,
> + .ops = &clk_rcg2_floor_ops,
> + },
> +};
> +
> static const struct freq_tbl ftbl_gcc_pdm2_clk_src[] = {
> F(9600000, P_BI_TCXO, 2, 0, 0),
> F(19200000, P_BI_TCXO, 1, 0, 0),
> @@ -1935,6 +1957,37 @@ static struct clk_branch gcc_qmip_video_ahb_clk = {
> },
> };
>
> +static struct clk_branch gcc_qspi_cnoc_periph_ahb_clk = {
> + .halt_reg = 0x4b000,
> + .halt_check = BRANCH_HALT,
> + .clkr = {
> + .enable_reg = 0x4b000,
> + .enable_mask = BIT(0),
> + .hw.init = &(struct clk_init_data){
> + .name = "gcc_qspi_cnoc_periph_ahb_clk",
> + .ops = &clk_branch2_ops,
> + },
> + },
> +};
> +
> +static struct clk_branch gcc_qspi_core_clk = {
> + .halt_reg = 0x4b004,
> + .halt_check = BRANCH_HALT,
> + .clkr = {
> + .enable_reg = 0x4b004,
> + .enable_mask = BIT(0),
> + .hw.init = &(struct clk_init_data){
> + .name = "gcc_qspi_core_clk",
> + .parent_names = (const char *[]){
> + "gcc_qspi_core_clk_src",
> + },
> + .num_parents = 1,
> + .flags = CLK_SET_RATE_PARENT,
> + .ops = &clk_branch2_ops,
> + },
> + },
> +};
> +
> static struct clk_branch gcc_qupv3_wrap0_s0_clk = {
> .halt_reg = 0x17030,
> .halt_check = BRANCH_HALT_VOTED,
> @@ -3383,6 +3436,9 @@ static struct clk_regmap *gcc_sdm845_clocks[] = {
> [GPLL4] = &gpll4.clkr,
> [GCC_CPUSS_DVM_BUS_CLK] = &gcc_cpuss_dvm_bus_clk.clkr,
> [GCC_CPUSS_GNOC_CLK] = &gcc_cpuss_gnoc_clk.clkr,
> + [GCC_QSPI_CORE_CLK_SRC] = &gcc_qspi_core_clk_src.clkr,
> + [GCC_QSPI_CORE_CLK] = &gcc_qspi_core_clk.clkr,
> + [GCC_QSPI_CNOC_PERIPH_AHB_CLK] = &gcc_qspi_cnoc_periph_ahb_clk.clkr,
> };
>
> static const struct qcom_reset_map gcc_sdm845_resets[] = {
>
Reviewed-by: Taniya Das <tdas@...eaurora.org>
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation.
--
Powered by blists - more mailing lists