linux-kernel - Re: [PATCH v2 2/2] arm64: dts: meson-g12a: add initial g12a s905d2 SoC DT support

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Mon, 13 Aug 2018 19:57:53 +0800
From:   Jianxin Pan <jianxin.pan@...ogic.com>
To:     Jerome Brunet <jbrunet@...libre.com>,
        Kevin Hilman <khilman@...libre.com>,
        <linux-amlogic@...ts.infradead.org>
CC:     Rob Herring <robh+dt@...nel.org>,
        Neil Armstrong <narmstrong@...libre.com>,
        Carlo Caione <carlo@...one.org>, Jian Hu <jian.hu@...ogic.com>,
        Yixun Lan <yixun.lan@...ogic.com>,
        Hanjie Lin <hanjie.lin@...ogic.com>,
        Qiufang Dai <qiufang.dai@...ogic.com>,
        Victor Wan <victor.wan@...ogic.com>,
        <devicetree@...r.kernel.org>,
        <linux-arm-kernel@...ts.infradead.org>,
        <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH v2 2/2] arm64: dts: meson-g12a: add initial g12a s905d2
 SoC DT support

On 8/13/2018 7:52 PM, Jerome Brunet wrote:
> On Mon, 2018-08-13 at 19:48 +0800, Jianxin Pan wrote:
>> Try to add basic DT support for the Amlogic's Meson-G12A S905D2 SoC,
>> which describe components as follows: Reserve Memory, CPU, GIC, IRQ,
>> Timer, UART. It's capable of booting up into the serial console.
>>
>> Signed-off-by: Jianxin Pan <jianxin.pan@...ogic.com>
>> ---
>>  arch/arm64/boot/dts/amlogic/Makefile            |   1 +
>>  arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts |  22 +++
>>  arch/arm64/boot/dts/amlogic/meson-g12a.dtsi     | 172 ++++++++++++++++++++++++
>>  3 files changed, 195 insertions(+)
>>  create mode 100644 arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts
>>  create mode 100644 arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
>>
>> +
>> +	timer {
>> +		compatible = "arm,armv8-timer";
>> +		interrupts = <GIC_PPI 13
>> +			(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
>> +			     <GIC_PPI 14
>> +			(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
>> +			     <GIC_PPI 11
>> +			(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
>> +			     <GIC_PPI 10
>> +			(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>;
>> +	};
> 
> t* should be after s*
OK, I will fix it. Thanks for your review
> 
>> +
>> +	soc {
>> +		compatible = "simple-bus";
>> +		#address-cells = <2>;
>> +		#size-cells = <2>;
>> +		ranges;
> 
> .
>