| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1534248753-2440-4-git-send-email-sricharan@codeaurora.org>
Date: Tue, 14 Aug 2018 17:42:22 +0530
From: Sricharan R <sricharan@...eaurora.org>
To: mark.rutland@....com, robh@...nel.org, sudeep.holla@....com,
linux@....linux.org.uk, ctatlor97@...il.com, rjw@...ysocki.net,
viresh.kumar@...aro.org, mturquette@...libre.com,
linux-pm@...r.kernel.org, sboyd@...eaurora.org,
linux@...linux.org.uk, thierry.escande@...aro.org,
linux-kernel@...r.kernel.org, david.brown@...aro.org,
devicetree@...r.kernel.org, linux-arm-msm@...r.kernel.org,
andy.gross@...aro.org, linux-soc@...r.kernel.org,
linux-clk@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
niklas.cassel@...aro.org
Cc: sricharan@...eaurora.org
Subject: [PATCH v12 03/14] clk: qcom: Add HFPLL driver
From: Stephen Boyd <sboyd@...eaurora.org>
On some devices (MSM8974 for example), the HFPLLs are
instantiated within the Krait processor subsystem as separate
register regions. Add a driver for these PLLs so that we can
provide HFPLL clocks for use by the system.
Cc: <devicetree@...r.kernel.org>
Signed-off-by: Stephen Boyd <sboyd@...eaurora.org>
Signed-off-by: Sricharan R <sricharan@...eaurora.org>
---
drivers/clk/qcom/Kconfig | 8 ++++
drivers/clk/qcom/Makefile | 1 +
drivers/clk/qcom/hfpll.c | 96 +++++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 105 insertions(+)
create mode 100644 drivers/clk/qcom/hfpll.c
diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig
index 0647686..21aec10 100644
--- a/drivers/clk/qcom/Kconfig
+++ b/drivers/clk/qcom/Kconfig
@@ -272,3 +272,11 @@ config SPMI_PMIC_CLKDIV
Technologies, Inc. SPMI PMIC. It configures the frequency of
clkdiv outputs of the PMIC. These clocks are typically wired
through alternate functions on GPIO pins.
+
+config QCOM_HFPLL
+ tristate "High-Frequency PLL (HFPLL) Clock Controller"
+ depends on COMMON_CLK_QCOM
+ help
+ Support for the high-frequency PLLs present on Qualcomm devices.
+ Say Y if you want to support CPU frequency scaling on devices
+ such as MSM8974, APQ8084, etc.
diff --git a/drivers/clk/qcom/Makefile b/drivers/clk/qcom/Makefile
index 7818e6c..f82eeac 100644
--- a/drivers/clk/qcom/Makefile
+++ b/drivers/clk/qcom/Makefile
@@ -44,3 +44,4 @@ obj-$(CONFIG_SDM_DISPCC_845) += dispcc-sdm845.o
obj-$(CONFIG_SDM_GCC_845) += gcc-sdm845.o
obj-$(CONFIG_SDM_VIDEOCC_845) += videocc-sdm845.o
obj-$(CONFIG_SPMI_PMIC_CLKDIV) += clk-spmi-pmic-div.o
+obj-$(CONFIG_QCOM_HFPLL) += hfpll.o
diff --git a/drivers/clk/qcom/hfpll.c b/drivers/clk/qcom/hfpll.c
new file mode 100644
index 0000000..a6de7101
--- /dev/null
+++ b/drivers/clk/qcom/hfpll.c
@@ -0,0 +1,96 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2018, The Linux Foundation. All rights reserved.
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/of.h>
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/regmap.h>
+
+#include "clk-regmap.h"
+#include "clk-hfpll.h"
+
+static const struct hfpll_data hdata = {
+ .mode_reg = 0x00,
+ .l_reg = 0x04,
+ .m_reg = 0x08,
+ .n_reg = 0x0c,
+ .user_reg = 0x10,
+ .config_reg = 0x14,
+ .config_val = 0x430405d,
+ .status_reg = 0x1c,
+ .lock_bit = 16,
+
+ .user_val = 0x8,
+ .user_vco_mask = 0x100000,
+ .low_vco_max_rate = 1248000000,
+ .min_rate = 537600000UL,
+ .max_rate = 2900000000UL,
+};
+
+static const struct of_device_id qcom_hfpll_match_table[] = {
+ { .compatible = "qcom,hfpll" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, qcom_hfpll_match_table);
+
+static const struct regmap_config hfpll_regmap_config = {
+ .reg_bits = 32,
+ .reg_stride = 4,
+ .val_bits = 32,
+ .max_register = 0x30,
+ .fast_io = true,
+};
+
+static int qcom_hfpll_probe(struct platform_device *pdev)
+{
+ struct resource *res;
+ struct device *dev = &pdev->dev;
+ void __iomem *base;
+ struct regmap *regmap;
+ struct clk_hfpll *h;
+ struct clk_init_data init = {
+ .parent_names = (const char *[]){ "xo" },
+ .num_parents = 1,
+ .ops = &clk_ops_hfpll,
+ };
+
+ h = devm_kzalloc(dev, sizeof(*h), GFP_KERNEL);
+ if (!h)
+ return -ENOMEM;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ base = devm_ioremap_resource(dev, res);
+ if (IS_ERR(base))
+ return PTR_ERR(base);
+
+ regmap = devm_regmap_init_mmio(&pdev->dev, base, &hfpll_regmap_config);
+ if (IS_ERR(regmap))
+ return PTR_ERR(regmap);
+
+ if (of_property_read_string_index(dev->of_node, "clock-output-names",
+ 0, &init.name))
+ return -ENODEV;
+
+ h->d = &hdata;
+ h->clkr.hw.init = &init;
+ spin_lock_init(&h->lock);
+
+ return devm_clk_register_regmap(&pdev->dev, &h->clkr);
+}
+
+static struct platform_driver qcom_hfpll_driver = {
+ .probe = qcom_hfpll_probe,
+ .driver = {
+ .name = "qcom-hfpll",
+ .of_match_table = qcom_hfpll_match_table,
+ },
+};
+module_platform_driver(qcom_hfpll_driver);
+
+MODULE_DESCRIPTION("QCOM HFPLL Clock Driver");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:qcom-hfpll");
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation
Powered by blists - more mailing lists