| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CABe79T7jQMbtn1SXZis7gNj2KqqPjdX6-VXdQPCWcRxmZa-hKA@mail.gmail.com>
Date: Tue, 14 Aug 2018 18:13:32 +0530
From: Srinath Mannam <srinath.mannam@...adcom.com>
To: "Hunter, Adrian" <adrian.hunter@...el.com>
Cc: Ulf Hansson <ulf.hansson@...aro.org>, Ray Jui <rjui@...adcom.com>,
Scott Branden <sbranden@...adcom.com>,
"vikram.prakash@...adcom.com" <vikram.prakash@...adcom.com>,
"bcm-kernel-feedback-list@...adcom.com"
<bcm-kernel-feedback-list@...adcom.com>,
"linux-mmc@...r.kernel.org" <linux-mmc@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH v4 2/2] mmc: host: iproc: Add ACPI support to IPROC SDHCI
Hi Ulf Hansson,
Please kindly provide your inputs.
Regards,
Srinath.
On Mon, Aug 6, 2018 at 12:13 PM, Hunter, Adrian <adrian.hunter@...el.com> wrote:
> Acked-by: Adrian Hunter <adrian.hunter@...el.com>
>
>> -----Original Message-----
>> From: Srinath Mannam [mailto:srinath.mannam@...adcom.com]
>> Sent: Sunday, August 5, 2018 10:53 AM
>> To: Ulf Hansson <ulf.hansson@...aro.org>; Hunter, Adrian
>> <adrian.hunter@...el.com>; Ray Jui <rjui@...adcom.com>; Scott Branden
>> <sbranden@...adcom.com>; vikram.prakash@...adcom.com
>> Cc: bcm-kernel-feedback-list@...adcom.com; linux-mmc@...r.kernel.org;
>> linux-kernel@...r.kernel.org; Srinath Mannam
>> <srinath.mannam@...adcom.com>
>> Subject: [PATCH v4 2/2] mmc: host: iproc: Add ACPI support to IPROC SDHCI
>>
>> Add ACPI support to all IPROC SDHCI varients
>>
>> Signed-off-by: Srinath Mannam <srinath.mannam@...adcom.com>
>> Reviewed-by: Ray Jui <ray.jui@...adcom.com>
>> Reviewed-by: Scott Branden <scott.branden@...adcom.com>
>> Reviewed-by: Vladimir Olovyannikov
>> <vladimir.olovyannikov@...adcom.com>
>> ---
>> drivers/mmc/host/Kconfig | 1 +
>> drivers/mmc/host/sdhci-iproc.c | 59 ++++++++++++++++++++++++++++----
>> ----------
>> 2 files changed, 41 insertions(+), 19 deletions(-)
>>
>> diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig index
>> 0581c19..bc6702e 100644
>> --- a/drivers/mmc/host/Kconfig
>> +++ b/drivers/mmc/host/Kconfig
>> @@ -334,6 +334,7 @@ config MMC_SDHCI_IPROC
>> tristate "SDHCI support for the BCM2835 & iProc SD/MMC Controller"
>> depends on ARCH_BCM2835 || ARCH_BCM_IPROC ||
>> COMPILE_TEST
>> depends on MMC_SDHCI_PLTFM
>> + depends on OF || ACPI
>> default ARCH_BCM_IPROC
>> select MMC_SDHCI_IO_ACCESSORS
>> help
>> diff --git a/drivers/mmc/host/sdhci-iproc.c b/drivers/mmc/host/sdhci-iproc.c
>> index d0e83db..0db9905 100644
>> --- a/drivers/mmc/host/sdhci-iproc.c
>> +++ b/drivers/mmc/host/sdhci-iproc.c
>> @@ -15,6 +15,7 @@
>> * iProc SDHCI platform driver
>> */
>>
>> +#include <linux/acpi.h>
>> #include <linux/delay.h>
>> #include <linux/module.h>
>> #include <linux/mmc/host.h>
>> @@ -162,9 +163,19 @@ static void sdhci_iproc_writeb(struct sdhci_host
>> *host, u8 val, int reg)
>> sdhci_iproc_writel(host, newval, reg & ~3); }
>>
>> +static unsigned int sdhci_iproc_get_max_clock(struct sdhci_host *host)
>> +{
>> + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
>> +
>> + if (pltfm_host->clk)
>> + return sdhci_pltfm_clk_get_max_clock(host);
>> + else
>> + return pltfm_host->clock;
>> +}
>> +
>> static const struct sdhci_ops sdhci_iproc_ops = {
>> .set_clock = sdhci_set_clock,
>> - .get_max_clock = sdhci_pltfm_clk_get_max_clock,
>> + .get_max_clock = sdhci_iproc_get_max_clock,
>> .set_bus_width = sdhci_set_bus_width,
>> .reset = sdhci_reset,
>> .set_uhs_signaling = sdhci_set_uhs_signaling, @@ -178,7 +189,7 @@
>> static const struct sdhci_ops sdhci_iproc_32only_ops = {
>> .write_w = sdhci_iproc_writew,
>> .write_b = sdhci_iproc_writeb,
>> .set_clock = sdhci_set_clock,
>> - .get_max_clock = sdhci_pltfm_clk_get_max_clock,
>> + .get_max_clock = sdhci_iproc_get_max_clock,
>> .set_bus_width = sdhci_set_bus_width,
>> .reset = sdhci_reset,
>> .set_uhs_signaling = sdhci_set_uhs_signaling, @@ -256,19 +267,25
>> @@ static const struct of_device_id sdhci_iproc_of_match[] = { };
>> MODULE_DEVICE_TABLE(of, sdhci_iproc_of_match);
>>
>> +static const struct acpi_device_id sdhci_iproc_acpi_ids[] = {
>> + { .id = "BRCM5871", .driver_data =
>> (kernel_ulong_t)&iproc_cygnus_data },
>> + { .id = "BRCM5872", .driver_data = (kernel_ulong_t)&iproc_data },
>> + { /* sentinel */ }
>> +};
>> +MODULE_DEVICE_TABLE(acpi, sdhci_iproc_acpi_ids);
>> +
>> static int sdhci_iproc_probe(struct platform_device *pdev) {
>> - const struct of_device_id *match;
>> - const struct sdhci_iproc_data *iproc_data;
>> + struct device *dev = &pdev->dev;
>> + const struct sdhci_iproc_data *iproc_data = NULL;
>> struct sdhci_host *host;
>> struct sdhci_iproc_host *iproc_host;
>> struct sdhci_pltfm_host *pltfm_host;
>> int ret;
>>
>> - match = of_match_device(sdhci_iproc_of_match, &pdev->dev);
>> - if (!match)
>> - return -EINVAL;
>> - iproc_data = match->data;
>> + iproc_data = device_get_match_data(dev);
>> + if (!iproc_data)
>> + return -ENODEV;
>>
>> host = sdhci_pltfm_init(pdev, iproc_data->pdata,
>> sizeof(*iproc_host));
>> if (IS_ERR(host))
>> @@ -280,19 +297,21 @@ static int sdhci_iproc_probe(struct platform_device
>> *pdev)
>> iproc_host->data = iproc_data;
>>
>> mmc_of_parse(host->mmc);
>> - sdhci_get_of_property(pdev);
>> + sdhci_get_property(pdev);
>>
>> host->mmc->caps |= iproc_host->data->mmc_caps;
>>
>> - pltfm_host->clk = devm_clk_get(&pdev->dev, NULL);
>> - if (IS_ERR(pltfm_host->clk)) {
>> - ret = PTR_ERR(pltfm_host->clk);
>> - goto err;
>> - }
>> - ret = clk_prepare_enable(pltfm_host->clk);
>> - if (ret) {
>> - dev_err(&pdev->dev, "failed to enable host clk\n");
>> - goto err;
>> + if (dev->of_node) {
>> + pltfm_host->clk = devm_clk_get(dev, NULL);
>> + if (IS_ERR(pltfm_host->clk)) {
>> + ret = PTR_ERR(pltfm_host->clk);
>> + goto err;
>> + }
>> + ret = clk_prepare_enable(pltfm_host->clk);
>> + if (ret) {
>> + dev_err(dev, "failed to enable host clk\n");
>> + goto err;
>> + }
>> }
>>
>> if (iproc_host->data->pdata->quirks &
>> SDHCI_QUIRK_MISSING_CAPS) { @@ -307,7 +326,8 @@ static int
>> sdhci_iproc_probe(struct platform_device *pdev)
>> return 0;
>>
>> err_clk:
>> - clk_disable_unprepare(pltfm_host->clk);
>> + if (dev->of_node)
>> + clk_disable_unprepare(pltfm_host->clk);
>> err:
>> sdhci_pltfm_free(pdev);
>> return ret;
>> @@ -317,6 +337,7 @@ static struct platform_driver sdhci_iproc_driver = {
>> .driver = {
>> .name = "sdhci-iproc",
>> .of_match_table = sdhci_iproc_of_match,
>> + .acpi_match_table = ACPI_PTR(sdhci_iproc_acpi_ids),
>> .pm = &sdhci_pltfm_pmops,
>> },
>> .probe = sdhci_iproc_probe,
>> --
>> 2.7.4
>
Powered by blists - more mailing lists