| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20180814171526.839719608@linuxfoundation.org>
Date: Tue, 14 Aug 2018 19:18:03 +0200
From: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To: linux-kernel@...r.kernel.org
Cc: Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
stable@...r.kernel.org, Josh Poimboeuf <jpoimboe@...hat.com>,
Thomas Gleixner <tglx@...utronix.de>,
David Woodhouse <dwmw@...zon.co.uk>
Subject: [PATCH 4.9 100/107] cpu/hotplug: Fix SMT supported evaluation
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Thomas Gleixner <tglx@...utronix.de>
commit bc2d8d262cba5736332cbc866acb11b1c5748aa9 upstream
Josh reported that the late SMT evaluation in cpu_smt_state_init() sets
cpu_smt_control to CPU_SMT_NOT_SUPPORTED in case that 'nosmt' was supplied
on the kernel command line as it cannot differentiate between SMT disabled
by BIOS and SMT soft disable via 'nosmt'. That wreckages the state and
makes the sysfs interface unusable.
Rework this so that during bringup of the non boot CPUs the availability of
SMT is determined in cpu_smt_allowed(). If a newly booted CPU is not a
'primary' thread then set the local cpu_smt_available marker and evaluate
this explicitely right after the initial SMP bringup has finished.
SMT evaulation on x86 is a trainwreck as the firmware has all the
information _before_ booting the kernel, but there is no interface to query
it.
Fixes: 73d5e2b47264 ("cpu/hotplug: detect SMT disabled by BIOS")
Reported-by: Josh Poimboeuf <jpoimboe@...hat.com>
Signed-off-by: Thomas Gleixner <tglx@...utronix.de>
Signed-off-by: David Woodhouse <dwmw@...zon.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
---
arch/x86/kernel/cpu/bugs.c | 2 +-
include/linux/cpu.h | 2 ++
kernel/cpu.c | 41 ++++++++++++++++++++++++++++-------------
kernel/smp.c | 2 ++
4 files changed, 33 insertions(+), 14 deletions(-)
--- a/arch/x86/kernel/cpu/bugs.c
+++ b/arch/x86/kernel/cpu/bugs.c
@@ -61,7 +61,7 @@ void __init check_bugs(void)
* identify_boot_cpu() initialized SMT support information, let the
* core code know.
*/
- cpu_smt_check_topology();
+ cpu_smt_check_topology_early();
if (!IS_ENABLED(CONFIG_SMP)) {
pr_info("CPU: ");
--- a/include/linux/cpu.h
+++ b/include/linux/cpu.h
@@ -267,10 +267,12 @@ enum cpuhp_smt_control {
#if defined(CONFIG_SMP) && defined(CONFIG_HOTPLUG_SMT)
extern enum cpuhp_smt_control cpu_smt_control;
extern void cpu_smt_disable(bool force);
+extern void cpu_smt_check_topology_early(void);
extern void cpu_smt_check_topology(void);
#else
# define cpu_smt_control (CPU_SMT_ENABLED)
static inline void cpu_smt_disable(bool force) { }
+static inline void cpu_smt_check_topology_early(void) { }
static inline void cpu_smt_check_topology(void) { }
#endif
--- a/kernel/cpu.c
+++ b/kernel/cpu.c
@@ -360,6 +360,8 @@ EXPORT_SYMBOL_GPL(cpu_hotplug_enable);
enum cpuhp_smt_control cpu_smt_control __read_mostly = CPU_SMT_ENABLED;
EXPORT_SYMBOL_GPL(cpu_smt_control);
+static bool cpu_smt_available __read_mostly;
+
void __init cpu_smt_disable(bool force)
{
if (cpu_smt_control == CPU_SMT_FORCE_DISABLED ||
@@ -376,14 +378,28 @@ void __init cpu_smt_disable(bool force)
/*
* The decision whether SMT is supported can only be done after the full
- * CPU identification. Called from architecture code.
+ * CPU identification. Called from architecture code before non boot CPUs
+ * are brought up.
*/
-void __init cpu_smt_check_topology(void)
+void __init cpu_smt_check_topology_early(void)
{
if (!topology_smt_supported())
cpu_smt_control = CPU_SMT_NOT_SUPPORTED;
}
+/*
+ * If SMT was disabled by BIOS, detect it here, after the CPUs have been
+ * brought online. This ensures the smt/l1tf sysfs entries are consistent
+ * with reality. cpu_smt_available is set to true during the bringup of non
+ * boot CPUs when a SMT sibling is detected. Note, this may overwrite
+ * cpu_smt_control's previous setting.
+ */
+void __init cpu_smt_check_topology(void)
+{
+ if (!cpu_smt_available)
+ cpu_smt_control = CPU_SMT_NOT_SUPPORTED;
+}
+
static int __init smt_cmdline_disable(char *str)
{
cpu_smt_disable(str && !strcmp(str, "force"));
@@ -393,10 +409,18 @@ early_param("nosmt", smt_cmdline_disable
static inline bool cpu_smt_allowed(unsigned int cpu)
{
- if (cpu_smt_control == CPU_SMT_ENABLED)
+ if (topology_is_primary_thread(cpu))
return true;
- if (topology_is_primary_thread(cpu))
+ /*
+ * If the CPU is not a 'primary' thread and the booted_once bit is
+ * set then the processor has SMT support. Store this information
+ * for the late check of SMT support in cpu_smt_check_topology().
+ */
+ if (per_cpu(cpuhp_state, cpu).booted_once)
+ cpu_smt_available = true;
+
+ if (cpu_smt_control == CPU_SMT_ENABLED)
return true;
/*
@@ -2063,15 +2087,6 @@ static const struct attribute_group cpuh
static int __init cpu_smt_state_init(void)
{
- /*
- * If SMT was disabled by BIOS, detect it here, after the CPUs have
- * been brought online. This ensures the smt/l1tf sysfs entries are
- * consistent with reality. Note this may overwrite cpu_smt_control's
- * previous setting.
- */
- if (topology_max_smt_threads() == 1)
- cpu_smt_control = CPU_SMT_NOT_SUPPORTED;
-
return sysfs_create_group(&cpu_subsys.dev_root->kobj,
&cpuhp_smt_attr_group);
}
--- a/kernel/smp.c
+++ b/kernel/smp.c
@@ -564,6 +564,8 @@ void __init smp_init(void)
cpu_up(cpu);
}
+ /* Final decision about SMT support */
+ cpu_smt_check_topology();
/* Any cleanup work */
smp_announce();
smp_cpus_done(setup_max_cpus);
Powered by blists - more mailing lists