[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAJwJo6aAGS3vB-F889zmDJjtU3xGLd=twbVVC=DydXYufKEwPQ@mail.gmail.com>
Date: Wed, 15 Aug 2018 03:26:24 +0100
From: Dmitry Safonov <0x7f454c46@...il.com>
To: stable <stable@...r.kernel.org>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>
Cc: Wolfram Sang <wsa@...-dreams.de>,
Andy Shevchenko <andy.shevchenko@...il.com>,
Seth Heasley <seth.heasley@...el.com>,
Neil Horman <nhorman@...driver.com>,
linux-i2c <linux-i2c@...r.kernel.org>,
linux-kernel <linux-kernel@...r.kernel.org>,
Song liwei <liwei.song@...driver.com>
Subject: Re: [PATCH V2] i2c: ismt: fix wrong device address when unmap the
data buffer
+Cc: stable
Hi Greg, JFI:
This one has hit a couple of times on autotests on v4.9 stable.
The fix for BUG() is trivial, so probably worth to ship it to v4.9/v4.4/v3.18.
2017-06-13 5:59 GMT+01:00 Song liwei <liwei.song@...driver.com>:
> From: Liwei Song <liwei.song@...driver.com>
>
> Fix the following kernel bug:
>
> kernel BUG at drivers/iommu/intel-iommu.c:3260!
> invalid opcode: 0000 [#5] PREEMPT SMP
> Hardware name: Intel Corp. Harcuvar/Server, BIOS HAVLCRB0.X64.0013.D39.1608311820 08/31/2016
> task: ffff880175389950 ti: ffff880176bec000 task.ti: ffff880176bec000
> RIP: 0010:[<ffffffff8150a83b>] [<ffffffff8150a83b>] intel_unmap+0x25b/0x260
> RSP: 0018:ffff880176bef5e8 EFLAGS: 00010296
> RAX: 0000000000000024 RBX: ffff8800773c7c88 RCX: 000000000000ce04
> RDX: 0000000080000000 RSI: 0000000000000000 RDI: 0000000000000009
> RBP: ffff880176bef638 R08: 0000000000000010 R09: 0000000000000004
> R10: ffff880175389c78 R11: 0000000000000a4f R12: ffff8800773c7868
> R13: 00000000ffffac88 R14: ffff8800773c7818 R15: 0000000000000001
> FS: 00007fef21258700(0000) GS:ffff88017b5c0000(0000) knlGS:0000000000000000
> CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> CR2: 000000000066d6d8 CR3: 000000007118c000 CR4: 00000000003406e0
> Stack:
> 00000000ffffac88 ffffffff8199867f ffff880176bef5f8 ffff880100000030
> ffff880176bef668 ffff8800773c7c88 ffff880178288098 ffff8800772c0010
> ffff8800773c7818 0000000000000001 ffff880176bef648 ffffffff8150a86e
> Call Trace:
> [<ffffffff8199867f>] ? printk+0x46/0x48
> [<ffffffff8150a86e>] intel_unmap_page+0xe/0x10
> [<ffffffffa039d99b>] ismt_access+0x27b/0x8fa [i2c_ismt]
> [<ffffffff81554420>] ? __pm_runtime_suspend+0xa0/0xa0
> [<ffffffff815544a0>] ? pm_suspend_timer_fn+0x80/0x80
> [<ffffffff81554420>] ? __pm_runtime_suspend+0xa0/0xa0
> [<ffffffff815544a0>] ? pm_suspend_timer_fn+0x80/0x80
> [<ffffffff8143dfd0>] ? pci_bus_read_dev_vendor_id+0xf0/0xf0
> [<ffffffff8172b36c>] i2c_smbus_xfer+0xec/0x4b0
> [<ffffffff810aa4d5>] ? vprintk_emit+0x345/0x530
> [<ffffffffa038936b>] i2cdev_ioctl_smbus+0x12b/0x240 [i2c_dev]
> [<ffffffff810aa829>] ? vprintk_default+0x29/0x40
> [<ffffffffa0389b33>] i2cdev_ioctl+0x63/0x1ec [i2c_dev]
> [<ffffffff811b04c8>] do_vfs_ioctl+0x328/0x5d0
> [<ffffffff8119d8ec>] ? vfs_write+0x11c/0x190
> [<ffffffff8109d449>] ? rt_up_read+0x19/0x20
> [<ffffffff811b07f1>] SyS_ioctl+0x81/0xa0
> [<ffffffff819a351b>] system_call_fastpath+0x16/0x6e
>
> This happen When run "i2cdetect -y 0" detect SMBus iSMT adapter.
>
> After finished I2C block read/write, when unmap the data buffer,
> a wrong device address was pass to dma_unmap_single().
>
> To fix this, give dma_unmap_single() the "dev" parameter, just like
> what dma_map_single() does, then unmap can find the right devices.
>
> Fixes: 13f35ac14cd0 ("i2c: Adding support for Intel iSMT SMBus 2.0 host controller")
> Signed-off-by: Liwei Song <liwei.song@...driver.com>
> ---
> drivers/i2c/busses/i2c-ismt.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/i2c/busses/i2c-ismt.c b/drivers/i2c/busses/i2c-ismt.c
> index f573448..e98e44e 100644
> --- a/drivers/i2c/busses/i2c-ismt.c
> +++ b/drivers/i2c/busses/i2c-ismt.c
> @@ -584,7 +584,7 @@ static int ismt_access(struct i2c_adapter *adap, u16 addr,
>
> /* unmap the data buffer */
> if (dma_size != 0)
> - dma_unmap_single(&adap->dev, dma_addr, dma_size, dma_direction);
> + dma_unmap_single(dev, dma_addr, dma_size, dma_direction);
>
> if (unlikely(!time_left)) {
> dev_err(dev, "completion wait timed out\n");
> --
> 2.7.4
>
--
Dmitry
Powered by blists - more mailing lists