[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <1534446483-12156-2-git-send-email-jollys@xilinx.com>
Date: Thu, 16 Aug 2018 12:08:01 -0700
From: Jolly Shah <jolly.shah@...inx.com>
To: <matthias.bgg@...il.com>, <andy.gross@...aro.org>,
<shawnguo@...nel.org>, <geert+renesas@...der.be>,
<bjorn.andersson@...aro.org>, <sean.wang@...iatek.com>,
<m.szyprowski@...sung.com>, <michal.simek@...inx.com>,
<robh+dt@...nel.org>, <mark.rutland@....com>
CC: <rajanv@...inx.com>, <devicetree@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>,
<linux-kernel@...r.kernel.org>, Rajan Vaja <rajan.vaja@...inx.com>,
Jolly Shah <jollys@...inx.com>
Subject: [PATCH v2 1/3] dt-bindings: soc: Add ZynqMP PM bindings
From: Rajan Vaja <rajan.vaja@...inx.com>
Add documentation to describe Xilinx ZynqMP power management
bindings.
Signed-off-by: Rajan Vaja <rajan.vaja@...inx.com>
Signed-off-by: Jolly Shah <jollys@...inx.com>
---
.../bindings/firmware/xilinx/xlnx,zynqmp-firmware.txt | 16 ++++++++++++++++
1 file changed, 16 insertions(+)
diff --git a/Documentation/devicetree/bindings/firmware/xilinx/xlnx,zynqmp-firmware.txt b/Documentation/devicetree/bindings/firmware/xilinx/xlnx,zynqmp-firmware.txt
index d215d15..cb9a6b7 100644
--- a/Documentation/devicetree/bindings/firmware/xilinx/xlnx,zynqmp-firmware.txt
+++ b/Documentation/devicetree/bindings/firmware/xilinx/xlnx,zynqmp-firmware.txt
@@ -64,6 +64,17 @@ Output clocks are registered based on clock information received
from firmware. Output clocks indexes are mentioned in
include/dt-bindings/clock/xlnx,zynqmp-clk.h.
+--------------------------------------------------------------------
+Device Tree Bindings for the Xilinx Zynq MPSoC Power Management
+--------------------------------------------------------------------
+The zynqmp-power node describes the power management configurations.
+It will control remote suspend/shutdown interfaces.
+
+Required properties:
+ - compatible: Must contain: "xlnx,zynqmp-power"
+ - interrupt-parent: Interrupt controller the interrupt is routed through
+ - interrupts: Interrupt specifier
+
-------
Example
-------
@@ -78,5 +89,10 @@ firmware {
clocks = <&pss_ref_clk>, <&video_clk>, <&pss_alt_ref_clk>, <&aux_ref_clk>, <>_crx_ref_clk>;
clock-names = "pss_ref_clk", "video_clk", "pss_alt_ref_clk","aux_ref_clk", "gt_crx_ref_clk";
};
+ zynqmp_power: zynqmp-power {
+ compatible = "xlnx,zynqmp-power";
+ interrupt-parent = <&gic>;
+ interrupts = <0 35 4>;
+ };
};
};
--
2.7.4
Powered by blists - more mailing lists