Date:   Mon, 20 Aug 2018 10:27:57 +0200
From:   Parthiban Nallathambi <pn@...x.de>
To:     Marcus Folkesson <marcus.folkesson@...il.com>
Cc:     pn@...x.de, jic23@...nel.org, knaack.h@....de, lars@...afoo.de,
        pmeerw@...erw.net, robh+dt@...nel.org, andy.shevchenko@...il.com,
        linux-iio@...r.kernel.org, linux-kernel@...r.kernel.org,
        mark.rutland@....com, devicetree@...r.kernel.org,
        matthias.bgg@...il.com, wd@...x.de, sbabic@...x.de, hs@...x.de
Subject: Re: [PATCH v6 1/2] iio: light: Add support for vishay vcnl4035

Hi Marcus,

On 08/19/2018 11:50 PM, Marcus Folkesson wrote:
> Hi,
> 
> On Tue, Aug 07, 2018 at 12:27:03PM +0200, Parthiban Nallathambi wrote:
>> Add support for VCNL4035, which is capable of Ambient light
>> sensing (ALS) and proximity function. This patch adds support
>> only for ALS function
>>
>> Signed-off-by: Parthiban Nallathambi <pn@...x.de>
>>
>> Changelog since v1:
>>
>> 1. Fixed 0-day warning on le16_to_cpu usage
>> 2. Persistence value is directly mapped to datasheet's value to
>> avoid confusions of usage from sysfs
>>
>> Changelog in v3:
>> - Usage of lock is not needed, removed mutex locking
>> - ALS threshold and persistence configuration available
>> as events and threshold events are notified to userspace
>> - Usage of devm_ is re-ordered and exit handling updated
>> - Complexity in timestamp calculation is removed and used
>> iio_get_time_ns
>>
>> Changelog in v4:
>> - New white light index is introduced for getting data from
>> white spectrum
>> - PM enable/disable is called from read_raw accordingly
>> - Probe exit handling re-ordered
>>
>> Changelog in v5:
>> - White spectrum is mesaured as "_CLEAR" intesity, so removed
>> white spectrum modifier
>> - Header re-ordering
>> - Trigger init and de-init into separate function
>> - Indentation correct and usage of dev_err in place of pr_err
>>
>> Changelog in v6:
>> - Usage of devm_ for trigger probing and cleanups
>> - pm_runtime re-order and exit patch corrections
>> - IIO_INTENSITY to IIO_LIGHT, lux/steps are fixed at IT cycle
>> lux can be calculated based on IT sensitivity
>> - _CLEAR to _BOTH although measurement is only WHITE spectrum
>> for traditional reasons
>> ---
> 
> As Jonathan already pointed out, the changelog should go here.
> A tip is to use notes (see `man git-notes`) to add a changelog and then
> generate the patches with `git format-patch --notes <SHA>`.
> 
> I find it really neat.

Sure, thanks for the hint about git notes.

> 
>>   drivers/iio/light/Kconfig    |  12 +
>>   drivers/iio/light/Makefile   |   1 +
>>   drivers/iio/light/vcnl4035.c | 686 +++++++++++++++++++++++++++++++++++++++++++
>>   3 files changed, 699 insertions(+)
>>   create mode 100644 drivers/iio/light/vcnl4035.c
>>
>> diff --git a/drivers/iio/light/Kconfig b/drivers/iio/light/Kconfig
>> index c7ef8d1862d6..b7069a4c28a2 100644
>> --- a/drivers/iio/light/Kconfig
>> +++ b/drivers/iio/light/Kconfig
>> @@ -447,6 +447,18 @@ config VCNL4000
>>   	 To compile this driver as a module, choose M here: the
>>   	 module will be called vcnl4000.
>>   
>> +config VCNL4035
>> +	tristate "VCNL4035 combined ALS and proximity sensor"
>> +	select REGMAP_I2C
>> +	depends on I2C
>> +	help
>> +	 Say Y here if you want to build a driver for the Vishay VCNL4035,
>> +	 combined ambient light (ALS) and proximity sensor. Currently only ALS
>> +	 function is available.
>> +
>> +	 To compile this driver as a module, choose M here: the
>> +	 module will be called vcnl4035.
>> +
>>   config VEML6070
>>   	tristate "VEML6070 UV A light sensor"
>>   	depends on I2C
>> diff --git a/drivers/iio/light/Makefile b/drivers/iio/light/Makefile
>> index 80943af5d627..dce98511a59b 100644
>> --- a/drivers/iio/light/Makefile
>> +++ b/drivers/iio/light/Makefile
>> @@ -44,6 +44,7 @@ obj-$(CONFIG_TSL2772)		+= tsl2772.o
>>   obj-$(CONFIG_TSL4531)		+= tsl4531.o
>>   obj-$(CONFIG_US5182D)		+= us5182d.o
>>   obj-$(CONFIG_VCNL4000)		+= vcnl4000.o
>> +obj-$(CONFIG_VCNL4035)		+= vcnl4035.o
>>   obj-$(CONFIG_VEML6070)		+= veml6070.o
>>   obj-$(CONFIG_VL6180)		+= vl6180.o
>>   obj-$(CONFIG_ZOPT2201)		+= zopt2201.o
>> diff --git a/drivers/iio/light/vcnl4035.c b/drivers/iio/light/vcnl4035.c
>> new file mode 100644
>> index 000000000000..e9f471d93a15
>> --- /dev/null
>> +++ b/drivers/iio/light/vcnl4035.c
>> @@ -0,0 +1,686 @@
>> +// SPDX-License-Identifier: GPL-2.0
>> +/*
>> + * VCNL4035 Ambient Light and Proximity Sensor - 7-bit I2C slave address 0x60
>> + *
>> + * Copyright (c) 2018, DENX Software Engineering GmbH
>> + * Author: Parthiban Nallathambi <pn@...x.de>
>> + *
>> + *
>> + * TODO: Proximity
>> + */
>> +#include <linux/bitops.h>
>> +#include <linux/i2c.h>
>> +#include <linux/module.h>
>> +#include <linux/pm_runtime.h>
>> +#include <linux/regmap.h>
>> +
>> +#include <linux/iio/buffer.h>
>> +#include <linux/iio/events.h>
>> +#include <linux/iio/iio.h>
>> +#include <linux/iio/sysfs.h>
>> +#include <linux/iio/trigger.h>
>> +#include <linux/iio/trigger_consumer.h>
>> +#include <linux/iio/triggered_buffer.h>
>> +
>> +#define VCNL4035_DRV_NAME	"vcnl4035"
>> +#define VCNL4035_IRQ_NAME	"vcnl4035_event"
>> +#define VCNL4035_REGMAP_NAME	"vcnl4035_regmap"
>> +
>> +/* Device registers */
>> +#define VCNL4035_ALS_CONF	0x00
>> +#define VCNL4035_ALS_THDH	0x01
>> +#define VCNL4035_ALS_THDL	0x02
>> +#define VCNL4035_ALS_DATA	0x0B
>> +#define VCNL4035_WHITE_DATA	0x0C
>> +#define VCNL4035_INT_FLAG	0x0D
>> +#define VCNL4035_DEV_ID		0x0E
>> +
>> +/* Register masks */
>> +#define VCNL4035_MODE_ALS_MASK		BIT(0)
>> +#define VCNL4035_MODE_ALS_WHITE_CHAN	BIT(8)
>> +#define VCNL4035_MODE_ALS_INT_MASK	BIT(1)
>> +#define VCNL4035_ALS_IT_MASK		GENMASK(7, 5)
>> +#define VCNL4035_ALS_PERS_MASK		GENMASK(3, 2)
>> +#define VCNL4035_INT_ALS_IF_H_MASK	BIT(12)
>> +#define VCNL4035_INT_ALS_IF_L_MASK	BIT(13)
>> +
>> +/* Default values */
>> +#define VCNL4035_MODE_ALS_ENABLE	BIT(0)
>> +#define VCNL4035_MODE_ALS_DISABLE	0x00
>> +#define VCNL4035_MODE_ALS_INT_ENABLE	BIT(1)
>> +#define VCNL4035_MODE_ALS_INT_DISABLE	0
>> +#define VCNL4035_DEV_ID_VAL		0x80
>> +#define VCNL4035_ALS_IT_DEFAULT		0x01
>> +#define VCNL4035_ALS_PERS_DEFAULT	0x00
>> +#define VCNL4035_ALS_THDH_DEFAULT	5000
>> +#define VCNL4035_ALS_THDL_DEFAULT	100
>> +#define VCNL4035_SLEEP_DELAY_MS		2000
>> +
>> +struct vcnl4035_data {
>> +	struct i2c_client *client;
>> +	struct regmap *regmap;
>> +	unsigned int als_it_val;
>> +	unsigned int als_persistence:4;
>> +	unsigned int als_thresh_low;
>> +	unsigned int als_thresh_high;
>> +	struct iio_trigger *drdy_trigger0;
>> +};
>> +
>> +static inline bool vcnl4035_is_triggered(struct vcnl4035_data *data)
>> +{
>> +	int ret;
>> +	int reg;
>> +
>> +	ret = regmap_read(data->regmap, VCNL4035_INT_FLAG, &reg);
>> +	if (ret < 0)
>> +		return false;
>> +
>> +	return !!(reg &
>> +		(VCNL4035_INT_ALS_IF_H_MASK | VCNL4035_INT_ALS_IF_L_MASK));
>> +}
>> +
>> +static irqreturn_t vcnl4035_drdy_irq_thread(int irq, void *private)
>> +{
>> +	struct iio_dev *indio_dev = private;
>> +	struct vcnl4035_data *data = iio_priv(indio_dev);
>> +
>> +	if (vcnl4035_is_triggered(data)) {
>> +		iio_push_event(indio_dev, IIO_UNMOD_EVENT_CODE(IIO_LIGHT,
>> +							0,
>> +							IIO_EV_TYPE_THRESH,
>> +							IIO_EV_DIR_EITHER),
>> +				iio_get_time_ns(indio_dev));
>> +		iio_trigger_poll_chained(data->drdy_trigger0);
>> +		return IRQ_HANDLED;
>> +	}
>> +
>> +	return IRQ_NONE;
>> +}
>> +
>> +/* Triggered buffer */
>> +static irqreturn_t vcnl4035_trigger_consumer_handler(int irq, void *p)
>> +{
>> +	struct iio_poll_func *pf = p;
>> +	struct iio_dev *indio_dev = pf->indio_dev;
>> +	struct vcnl4035_data *data = iio_priv(indio_dev);
>> +	u8 buffer[ALIGN(sizeof(u16), sizeof(s64)) + sizeof(s64)];
>> +	int ret;
>> +
>> +	ret = regmap_read(data->regmap, VCNL4035_ALS_DATA, (int *)buffer);
>> +	if (ret < 0) {
>> +		dev_err(&data->client->dev,
>> +			"Trigger consumer can't read from sensor.\n");
>> +		goto fail_read;
>> +	}
>> +	iio_push_to_buffers_with_timestamp(indio_dev, buffer,
>> +					iio_get_time_ns(indio_dev));
>> +
>> +fail_read:
>> +	iio_trigger_notify_done(indio_dev->trig);
>> +
>> +	return IRQ_HANDLED;
>> +}
>> +
>> +static int vcnl4035_als_drdy_set_state(struct iio_trigger *trigger,
>> +					bool enable_drdy)
>> +{
>> +	struct iio_dev *indio_dev = iio_trigger_get_drvdata(trigger);
>> +	struct vcnl4035_data *data = iio_priv(indio_dev);
>> +	int val = enable_drdy ? VCNL4035_MODE_ALS_INT_ENABLE :
>> +					VCNL4035_MODE_ALS_INT_DISABLE;
>> +
>> +	return regmap_update_bits(data->regmap, VCNL4035_ALS_CONF,
>> +				 VCNL4035_MODE_ALS_INT_MASK,
>> +				 val);
>> +}
>> +
>> +static const struct iio_trigger_ops vcnl4035_trigger_ops = {
>> +	.validate_device = iio_trigger_validate_own_device,
>> +	.set_trigger_state = vcnl4035_als_drdy_set_state,
>> +};
>> +
>> +static int vcnl4035_set_pm_runtime_state(struct vcnl4035_data *data, bool on)
>> +{
>> +	int ret;
>> +	struct device *dev = &data->client->dev;
>> +
>> +	if (on) {
>> +		ret = pm_runtime_get_sync(dev);
>> +		if (ret < 0)
>> +			pm_runtime_put_noidle(dev);
>> +	} else {
>> +		pm_runtime_mark_last_busy(dev);
>> +		ret = pm_runtime_put_autosuspend(dev);
>> +	}
>> +
>> +	return ret;
>> +}
>> +
>> +/*
>> + *	Device IT	INT Time (ms)	Scale (lux/step)
>> + *	000		50		0.064
>> + *	001		100		0.032
>> + *	010		200		0.016
>> + *	100		400		0.008
>> + *	101 - 111	800		0.004
>> + * Values are proportional, so ALS INT is selected for input due to
>> + * simplicity reason. Integration time value and scaling is
>> + * calculated based on device INT value
>> + *
>> + * Raw value needs to be scaled using ALS steps
>> + */
>> +static int vcnl4035_read_raw(struct iio_dev *indio_dev,
>> +			    struct iio_chan_spec const *chan, int *val,
>> +			    int *val2, long mask)
>> +{
>> +	struct vcnl4035_data *data = iio_priv(indio_dev);
>> +	int ret;
>> +	int raw_data;
>> +	unsigned int reg;
>> +
>> +	switch (mask) {
>> +	case IIO_CHAN_INFO_RAW:
>> +		ret = vcnl4035_set_pm_runtime_state(data, true);
>> +		if  (ret < 0)
>> +			return ret;
>> +
>> +		ret = iio_device_claim_direct_mode(indio_dev);
>> +		if (!ret) {
>> +			if (chan->channel)
>> +				reg = VCNL4035_ALS_DATA;
>> +			else
>> +				reg = VCNL4035_WHITE_DATA;
>> +			ret = regmap_read(data->regmap, reg, &raw_data);
>> +			iio_device_release_direct_mode(indio_dev);
>> +			if (!ret) {
>> +				*val = raw_data;
>> +				ret = IIO_VAL_INT;
>> +			}
>> +		}
>> +		vcnl4035_set_pm_runtime_state(data, false);
>> +		return ret;
>> +	case IIO_CHAN_INFO_INT_TIME:
>> +		*val = 50;
>> +		if (data->als_it_val)
>> +			*val = data->als_it_val * 100;
>> +		return IIO_VAL_INT;
>> +	case IIO_CHAN_INFO_SCALE:
>> +		*val = 64;
>> +		if (!data->als_it_val)
>> +			*val2 = 1000;
>> +		else
>> +			*val2 = data->als_it_val * 2 * 1000;
>> +		return IIO_VAL_FRACTIONAL;
>> +	default:
>> +		return -EINVAL;
>> +	}
>> +}
>> +
>> +static int vcnl4035_write_raw(struct iio_dev *indio_dev,
>> +				struct iio_chan_spec const *chan,
>> +				int val, int val2, long mask)
>> +{
>> +	int ret;
>> +	struct vcnl4035_data *data = iio_priv(indio_dev);
>> +
>> +	switch (mask) {
>> +	case IIO_CHAN_INFO_INT_TIME:
> 
> Should we check that val2 is 0?
> 
>> +		if (val <= 0 || val > 800)
>> +			return -EINVAL;
>> +
>> +		ret = vcnl4035_set_pm_runtime_state(data, true);
>> +		if  (ret < 0)
>> +			return ret;
>> +
>> +		ret = regmap_update_bits(data->regmap, VCNL4035_ALS_CONF,
>> +					 VCNL4035_ALS_IT_MASK,
>> +					 val / 100);
>> +		if (!ret)
>> +			data->als_it_val = val / 100;
>> +
>> +		vcnl4035_set_pm_runtime_state(data, false);
>> +		return ret;
>> +	default:
>> +		return -EINVAL;
>> +	}
>> +}
>> +
>> +/* No direct ABI for persistence and threshold, so eventing */
>> +static int vcnl4035_read_thresh(struct iio_dev *indio_dev,
>> +		const struct iio_chan_spec *chan, enum iio_event_type type,
>> +		enum iio_event_direction dir, enum iio_event_info info,
>> +		int *val, int *val2)
>> +{
>> +	struct vcnl4035_data *data = iio_priv(indio_dev);
>> +
>> +	switch (info) {
>> +	case IIO_EV_INFO_VALUE:
>> +		switch (dir) {
>> +		case IIO_EV_DIR_RISING:
>> +			*val = data->als_thresh_high;
>> +			return IIO_VAL_INT;
>> +		case IIO_EV_DIR_FALLING:
>> +			*val = data->als_thresh_low;
>> +			return IIO_VAL_INT;
>> +		default:
>> +			return -EINVAL;
>> +		}
>> +		break;
>> +	case IIO_EV_INFO_PERIOD:
>> +		*val = data->als_persistence;
>> +		return IIO_VAL_INT;
>> +	default:
>> +		return -EINVAL;
>> +	}
>> +
>> +}
>> +
>> +static int vcnl4035_write_thresh(struct iio_dev *indio_dev,
>> +		const struct iio_chan_spec *chan, enum iio_event_type type,
>> +		enum iio_event_direction dir, enum iio_event_info info, int val,
>> +		int val2)
>> +{
>> +	struct vcnl4035_data *data = iio_priv(indio_dev);
>> +	int ret;
>> +
> 
> Should we check that val2 is 0?
> 
>> +	switch (info) {
>> +	case IIO_EV_INFO_VALUE:
>> +		/* 16 bit threshold range 0 - 65535 */
>> +		if (val < 0 || val > 65535)
>> +			return -EINVAL;
>> +		if (dir == IIO_EV_DIR_RISING) {
>> +			if (val < data->als_thresh_low)
>> +				return -EINVAL;
>> +			ret = regmap_write(data->regmap, VCNL4035_ALS_THDH,
>> +					   val);
>> +			if (!ret)
>> +				data->als_thresh_high = val;
>> +		} else {
>> +			if (val > data->als_thresh_high)
>> +				return -EINVAL;
>> +			ret = regmap_write(data->regmap, VCNL4035_ALS_THDL,
>> +					   val);
>> +			if (!ret)
>> +				data->als_thresh_low = val;
>> +		}
>> +		return ret;
>> +	case IIO_EV_INFO_PERIOD:
>> +		/* allow only 1 2 4 8 as persistence value */
>> +		if (val < 0 || val > 8 || __sw_hweight8(val) != 1)
>> +			return -EINVAL;
>> +		ret = regmap_update_bits(data->regmap, VCNL4035_ALS_CONF,
>> +					 VCNL4035_ALS_PERS_MASK, val);
>> +		if (!ret)
>> +			data->als_persistence = val;
>> +		return ret;
>> +	default:
>> +		return -EINVAL;
>> +	}
>> +}
>> +
>> +static IIO_CONST_ATTR_INT_TIME_AVAIL("50 100 200 400 800");
>> +
>> +static struct attribute *vcnl4035_attributes[] = {
>> +	&iio_const_attr_integration_time_available.dev_attr.attr,
>> +	NULL,
>> +};
>> +
>> +static const struct attribute_group vcnl4035_attribute_group = {
>> +	.attrs = vcnl4035_attributes,
>> +};
>> +
>> +static const struct iio_info vcnl4035_info = {
>> +	.read_raw		= vcnl4035_read_raw,
>> +	.write_raw		= vcnl4035_write_raw,
>> +	.read_event_value	= vcnl4035_read_thresh,
>> +	.write_event_value	= vcnl4035_write_thresh,
>> +	.attrs			= &vcnl4035_attribute_group,
>> +};
>> +
>> +static const struct iio_event_spec vcnl4035_event_spec[] = {
>> +	{
>> +		.type = IIO_EV_TYPE_THRESH,
>> +		.dir = IIO_EV_DIR_RISING,
>> +		.mask_separate = BIT(IIO_EV_INFO_VALUE),
>> +	}, {
>> +		.type = IIO_EV_TYPE_THRESH,
>> +		.dir = IIO_EV_DIR_FALLING,
>> +		.mask_separate = BIT(IIO_EV_INFO_VALUE),
>> +	}, {
>> +		.type = IIO_EV_TYPE_THRESH,
>> +		.dir = IIO_EV_DIR_EITHER,
>> +		.mask_separate = BIT(IIO_EV_INFO_PERIOD),
>> +	},
>> +};
>> +
>> +enum vcnl4035_scan_index_order {
>> +	VCNL4035_CHAN_INDEX_LIGHT,
>> +	VCNL4035_CHAN_INDEX_WHITE_LED,
>> +};
>> +
>> +static const unsigned long vcnl4035_available_scan_masks[] = {
>> +	BIT(VCNL4035_CHAN_INDEX_LIGHT),
>> +	BIT(VCNL4035_CHAN_INDEX_WHITE_LED),
>> +	0
>> +};
>> +
>> +static const struct iio_chan_spec vcnl4035_channels[] = {
>> +	{
>> +		.type = IIO_LIGHT,
>> +		.channel = 0,
>> +		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
>> +				BIT(IIO_CHAN_INFO_INT_TIME) |
>> +				BIT(IIO_CHAN_INFO_SCALE),
>> +		.event_spec = vcnl4035_event_spec,
>> +		.num_event_specs = ARRAY_SIZE(vcnl4035_event_spec),
>> +		.scan_index = VCNL4035_CHAN_INDEX_LIGHT,
>> +		.scan_type = {
>> +			.sign = 'u',
>> +			.realbits = 16,
>> +			.storagebits = 16,
>> +			.endianness = IIO_LE,
>> +		},
>> +	},
>> +	{
>> +		.type = IIO_LIGHT,
>> +		.channel = 1,
>> +		.modified = 1,
>> +		.channel2 = IIO_MOD_LIGHT_BOTH,
>> +		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
>> +		.scan_index = VCNL4035_CHAN_INDEX_WHITE_LED,
>> +		.scan_type = {
>> +			.sign = 'u',
>> +			.realbits = 16,
>> +			.storagebits = 16,
>> +			.endianness = IIO_LE,
>> +		},
>> +	},
>> +};
>> +
>> +static int vcnl4035_set_als_power_state(struct vcnl4035_data *data, u8 status)
>> +{
>> +	return regmap_update_bits(data->regmap, VCNL4035_ALS_CONF,
>> +					VCNL4035_MODE_ALS_MASK,
>> +					status);
>> +}
>> +
>> +static int vcnl4035_init(struct vcnl4035_data *data)
>> +{
>> +	int ret;
>> +	int id;
>> +
>> +	ret = regmap_read(data->regmap, VCNL4035_DEV_ID, &id);
>> +	if (ret < 0) {
>> +		dev_err(&data->client->dev, "Failed to read DEV_ID register\n");
>> +		return ret;
>> +	}
>> +
>> +	if (id != VCNL4035_DEV_ID_VAL) {
>> +		dev_err(&data->client->dev, "Wrong id, got %x, expected %x\n",
>> +			id, VCNL4035_DEV_ID_VAL);
>> +		return -ENODEV;
>> +	}
>> +
>> +	ret = vcnl4035_set_als_power_state(data, VCNL4035_MODE_ALS_ENABLE);
>> +	if (ret < 0)
>> +		return ret;
>> +
>> +	/* ALS white channel enable */
>> +	ret = regmap_update_bits(data->regmap, VCNL4035_ALS_CONF,
>> +				 VCNL4035_MODE_ALS_WHITE_CHAN,
>> +				 1);
>> +	if (ret) {
>> +		dev_err(&data->client->dev, "set white channel enable %d\n",
>> +			ret);
>> +		return ret;
>> +	}
>> +
>> +	/* set default integration time - 100 ms for ALS */
>> +	ret = regmap_update_bits(data->regmap, VCNL4035_ALS_CONF,
>> +				 VCNL4035_ALS_IT_MASK,
>> +				 VCNL4035_ALS_IT_DEFAULT);
>> +	if (ret) {
>> +		dev_err(&data->client->dev, "set default ALS IT returned %d\n",
>> +			ret);
>> +		return ret;
>> +	}
>> +	data->als_it_val = VCNL4035_ALS_IT_DEFAULT;
>> +
>> +	/* set default persistence time - 1 for ALS */
>> +	ret = regmap_update_bits(data->regmap, VCNL4035_ALS_CONF,
>> +				 VCNL4035_ALS_PERS_MASK,
>> +				 VCNL4035_ALS_PERS_DEFAULT);
>> +	if (ret) {
>> +		dev_err(&data->client->dev, "set default PERS returned %d\n",
>> +			ret);
>> +		return ret;
>> +	}
>> +	data->als_persistence = VCNL4035_ALS_PERS_DEFAULT;
>> +
>> +	/* set default HIGH threshold for ALS */
>> +	ret = regmap_write(data->regmap, VCNL4035_ALS_THDH,
>> +				VCNL4035_ALS_THDH_DEFAULT);
>> +	if (ret) {
>> +		dev_err(&data->client->dev, "set default THDH returned %d\n",
>> +			ret);
>> +		return ret;
>> +	}
>> +	data->als_thresh_high = VCNL4035_ALS_THDH_DEFAULT;
>> +
>> +	/* set default LOW threshold for ALS */
>> +	ret = regmap_write(data->regmap, VCNL4035_ALS_THDL,
>> +				VCNL4035_ALS_THDL_DEFAULT);
>> +	if (ret) {
>> +		dev_err(&data->client->dev, "set default THDL returned %d\n",
>> +			ret);
>> +		return ret;
>> +	}
>> +	data->als_thresh_low = VCNL4035_ALS_THDL_DEFAULT;
>> +
>> +	return 0;
>> +}
>> +
>> +static bool vcnl4035_is_volatile_reg(struct device *dev, unsigned int reg)
>> +{
>> +	switch (reg) {
>> +	case VCNL4035_ALS_CONF:
>> +	case VCNL4035_DEV_ID:
>> +		return false;
>> +	default:
>> +		return true;
>> +	}
>> +}
>> +
>> +static const struct regmap_config vcnl4035_regmap_config = {
>> +	.name		= VCNL4035_REGMAP_NAME,
>> +	.reg_bits	= 8,
>> +	.val_bits	= 16,
>> +	.max_register	= VCNL4035_DEV_ID,
>> +	.cache_type	= REGCACHE_RBTREE,
>> +	.volatile_reg	= vcnl4035_is_volatile_reg,
>> +	.val_format_endian = REGMAP_ENDIAN_LITTLE,
>> +};
>> +
>> +static int vcnl4035_probe_trigger(struct iio_dev *indio_dev)
>> +{
>> +	int ret;
>> +	struct vcnl4035_data *data = iio_priv(indio_dev);
>> +
>> +	data->drdy_trigger0 = devm_iio_trigger_alloc(
>> +			indio_dev->dev.parent,
>> +			"%s-dev%d", indio_dev->name, indio_dev->id);
>> +	if (!data->drdy_trigger0)
>> +		return -ENOMEM;
>> +
>> +	data->drdy_trigger0->dev.parent = indio_dev->dev.parent;
>> +	data->drdy_trigger0->ops = &vcnl4035_trigger_ops;
>> +	iio_trigger_set_drvdata(data->drdy_trigger0, indio_dev);
>> +	ret = devm_iio_trigger_register(indio_dev->dev.parent,
>> +					data->drdy_trigger0);
>> +	if (ret) {
>> +		dev_err(&data->client->dev, "iio trigger register failed\n");
>> +		return ret;
>> +	}
>> +
>> +	/* Trigger setup */
>> +	ret = devm_iio_triggered_buffer_setup(indio_dev->dev.parent, indio_dev,
>> +					NULL, vcnl4035_trigger_consumer_handler,
>> +					NULL);
>> +	if (ret < 0) {
>> +		dev_err(&data->client->dev, "iio triggered buffer setup failed\n");
>> +		return ret;
>> +	}
>> +
>> +	/* IRQ to trigger mapping */
>> +	ret = devm_request_threaded_irq(&data->client->dev, data->client->irq,
>> +			NULL, vcnl4035_drdy_irq_thread,
>> +			IRQF_TRIGGER_LOW | IRQF_ONESHOT,
>> +			VCNL4035_IRQ_NAME, indio_dev);
>> +	if (ret < 0) {
>> +		dev_err(&data->client->dev, "request irq %d for trigger0 failed\n",
>> +				data->client->irq);
>> +		return ret;
>> +	}
>> +
>> +	return 0;
>> +}
>> +
>> +static int vcnl4035_probe(struct i2c_client *client,
>> +				const struct i2c_device_id *id)
>> +{
>> +	struct vcnl4035_data *data;
>> +	struct iio_dev *indio_dev;
>> +	struct regmap *regmap;
>> +	int ret;
>> +
>> +	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
>> +	if (!indio_dev)
>> +		return -ENOMEM;
>> +
>> +	regmap = devm_regmap_init_i2c(client, &vcnl4035_regmap_config);
>> +	if (IS_ERR(regmap)) {
>> +		dev_err(&client->dev, "regmap_init failed!\n");
>> +		return PTR_ERR(regmap);
>> +	}
>> +
>> +	data = iio_priv(indio_dev);
>> +	i2c_set_clientdata(client, indio_dev);
>> +	data->client = client;
>> +	data->regmap = regmap;
>> +
>> +	indio_dev->dev.parent = &client->dev;
>> +	indio_dev->info = &vcnl4035_info;
>> +	indio_dev->name = VCNL4035_DRV_NAME;
>> +	indio_dev->channels = vcnl4035_channels;
>> +	indio_dev->num_channels = ARRAY_SIZE(vcnl4035_channels);
>> +	indio_dev->modes = INDIO_DIRECT_MODE;
>> +
>> +	ret = vcnl4035_init(data);
>> +	if (ret < 0) {
>> +		dev_err(&client->dev, "vcnl4035 chip init failed\n");
>> +		return ret;
>> +	}
>> +
>> +	if (client->irq > 0) {
>> +		ret = vcnl4035_probe_trigger(indio_dev);
>> +		if (ret < 0) {
>> +			dev_err(&client->dev, "vcnl4035 unable init trigger\n");
>> +			goto fail_poweroff;
>> +		}
>> +	}
>> +
>> +	ret = iio_device_register(indio_dev);
>> +	if (ret)
>> +		goto fail_poweroff;
>> +
>> +	ret = pm_runtime_set_active(&client->dev);
>> +	if (ret < 0)
>> +		goto fail_unregister;
>> +
>> +	pm_runtime_enable(&client->dev);
>> +	pm_runtime_set_autosuspend_delay(&client->dev, VCNL4035_SLEEP_DELAY_MS);
>> +	pm_runtime_use_autosuspend(&client->dev);
>> +
>> +	return 0;
>> +
>> +fail_unregister:
>> +	iio_device_unregister(indio_dev);
>> +fail_poweroff:
>> +	vcnl4035_set_als_power_state(data, VCNL4035_MODE_ALS_DISABLE);
>> +	return ret;
>> +}
>> +
>> +static int vcnl4035_remove(struct i2c_client *client)
>> +{
>> +	struct iio_dev *indio_dev = i2c_get_clientdata(client);
>> +
>> +	iio_device_unregister(indio_dev);
>> +
>> +	pm_runtime_dont_use_autosuspend(&client->dev);
>> +	pm_runtime_disable(&client->dev);
>> +	pm_runtime_set_suspended(&client->dev);
>> +	pm_runtime_put_noidle(&client->dev);
>> +
>> +	return vcnl4035_set_als_power_state(iio_priv(indio_dev),
>> +					VCNL4035_MODE_ALS_DISABLE);
>> +}
>> +
>> +#ifdef CONFIG_PM
>> +static int __maybe_unused vcnl4035_runtime_suspend(struct device *dev)
>> +{
>> +	struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev));
>> +	struct vcnl4035_data *data = iio_priv(indio_dev);
>> +	int ret;
>> +
>> +	ret = vcnl4035_set_als_power_state(data, VCNL4035_MODE_ALS_DISABLE);
>> +	regcache_mark_dirty(data->regmap);
>> +
>> +	return ret;
>> +}
>> +
>> +static int __maybe_unused vcnl4035_runtime_resume(struct device *dev)
>> +{
>> +	struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev));
>> +	struct vcnl4035_data *data = iio_priv(indio_dev);
>> +	int ret;
>> +
>> +	regcache_sync(data->regmap);
>> +	ret = vcnl4035_set_als_power_state(data, VCNL4035_MODE_ALS_ENABLE);
>> +	if (ret < 0)
>> +		return ret;
>> +
>> +	/* wait for 1 ALS integration cycle */
>> +	msleep(data->als_it_val * 100);
>> +
>> +	return 0;
>> +}
>> +#endif
>> +
>> +static const struct dev_pm_ops vcnl4035_pm_ops = {
>> +	SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
>> +				pm_runtime_force_resume)
>> +	SET_RUNTIME_PM_OPS(vcnl4035_runtime_suspend,
>> +			   vcnl4035_runtime_resume, NULL)
>> +};
>> +
>> +static const struct of_device_id vcnl4035_of_match[] = {
>> +	{ .compatible = "vishay,vcnl4035", },
>> +	{ }
>> +};
>> +MODULE_DEVICE_TABLE(of, vcnl4035_of_match);
>> +
>> +static struct i2c_driver vcnl4035_driver = {
>> +	.driver = {
>> +		.name   = VCNL4035_DRV_NAME,
>> +		.pm	= &vcnl4035_pm_ops,
>> +		.of_match_table = of_match_ptr(vcnl4035_of_match),
> 
> Please correct me if I'm wrong here.
> 
> Use of_match_ptr() and not provide an ACPI match table will not make
> this driver work on ACPI systems.
> 
> The reason is that the ACPI match function will fall back on
> of_match_table if no acpi_match_table is provided, and the
> of_match_ptr() macro will simple evaluate to NULL if not CONFIG_OF
> is set.
> 
> In other words, I think we should change this to just
> 		.of_match_table = &vcnl4035_of_match,

Yes, I missed that in last revision. Andy pointed me this. I will remove
this and also ifdef CONFIG_PM which is not required in next revision.

> 
>> +	},
>> +	.probe  = vcnl4035_probe,
>> +	.remove	= vcnl4035_remove,
>> +};
>> +
>> +module_i2c_driver(vcnl4035_driver);
>> +
>> +MODULE_AUTHOR("Parthiban Nallathambi <pn@...x.de>");
>> +MODULE_DESCRIPTION("VCNL4035 Ambient Light Sensor driver");
>> +MODULE_LICENSE("GPL v2");
>> -- 
>> 2.14.4
>>
> 
> Best regards
> Marcus Folkesson
> 

-- 
Thanks,
Parthiban Nallathambi

DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd@...x.de

Powered by blists - more mailing lists