| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Tue, 21 Aug 2018 05:47:18 +0000
From: Naga Sureshkumar Relli <nagasure@...inx.com>
To: Boris Brezillon <boris.brezillon@...tlin.com>
CC: "miquel.raynal@...tlin.com" <miquel.raynal@...tlin.com>,
"richard@....at" <richard@....at>,
"dwmw2@...radead.org" <dwmw2@...radead.org>,
"computersforpeace@...il.com" <computersforpeace@...il.com>,
"marek.vasut@...il.com" <marek.vasut@...il.com>,
"kyungmin.park@...sung.com" <kyungmin.park@...sung.com>,
"absahu@...eaurora.org" <absahu@...eaurora.org>,
"peterpandong@...ron.com" <peterpandong@...ron.com>,
"frieder.schrempf@...eet.de" <frieder.schrempf@...eet.de>,
"linux-mtd@...ts.infradead.org" <linux-mtd@...ts.infradead.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
Michal Simek <michals@...inx.com>,
"nagasureshkumarrelli@...il.com" <nagasureshkumarrelli@...il.com>
Subject: RE: [LINUX PATCH v10 1/2] dt-bindings: mtd: arasan: Add device tree
binding documentation
Hi Boris,
> -----Original Message-----
> From: Boris Brezillon [mailto:boris.brezillon@...tlin.com]
> Sent: Monday, August 20, 2018 6:03 PM
> To: Naga Sureshkumar Relli <nagasure@...inx.com>
> Cc: miquel.raynal@...tlin.com; richard@....at; dwmw2@...radead.org;
> computersforpeace@...il.com; marek.vasut@...il.com; kyungmin.park@...sung.com;
> absahu@...eaurora.org; peterpandong@...ron.com; frieder.schrempf@...eet.de; linux-
> mtd@...ts.infradead.org; linux-kernel@...r.kernel.org; Michal Simek <michals@...inx.com>;
> nagasureshkumarrelli@...il.com
> Subject: Re: [LINUX PATCH v10 1/2] dt-bindings: mtd: arasan: Add device tree binding
> documentation
>
> On Fri, 17 Aug 2018 18:49:23 +0530
> Naga Sureshkumar Relli <naga.sureshkumar.relli@...inx.com> wrote:
>
> > This patch adds the dts binding document for arasan nand flash
> > controller.
> >
> > Signed-off-by: Naga Sureshkumar Relli
> > <naga.sureshkumar.relli@...inx.com>
> > ---
> > Changes in v10:
> > - None
> > Changes in v9:
> > - None
> > Changes in v8:
> > - Updated compatible and clock-names as per Boris comments Changes in
> > v7:
> > - Corrected the acronyms those should be in caps changes in v6:
> > - Removed num-cs property
> > - Separated nandchip from nand controller changes in v5:
> > - None
> > Changes in v4:
> > - Added num-cs property
> > - Added clock support
> > Changes in v3:
> > - None
> > Changes in v2:
> > - None
> > ---
> > .../devicetree/bindings/mtd/arasan_nand.txt | 38 ++++++++++++++++++++++
> > 1 file changed, 38 insertions(+)
> > create mode 100644
> > Documentation/devicetree/bindings/mtd/arasan_nand.txt
> >
> > diff --git a/Documentation/devicetree/bindings/mtd/arasan_nand.txt
> > b/Documentation/devicetree/bindings/mtd/arasan_nand.txt
> > new file mode 100644
> > index 0000000..234d7ca
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/mtd/arasan_nand.txt
> > @@ -0,0 +1,38 @@
> > +Arasan NAND Flash Controller with ONFI 3.1 support
> > +
> > +Required properties:
> > +- compatible: Should be "xlnx,zynqmp-nand" or "arasan,nfc-v3p10"
>
> In your example it's not an "or" since both are defined.
In our previous discussion (https://lore.kernel.org/patchwork/patch/748901/)
We decided to have compatible strings like " compatible = "<soc-vendor>,<ip-revision>", "arasan,<ip-revision>";"
So it should be either of these.
so I will write something like below
"Possible values are "xlnx,zynqmp-nand"
"arasan,nfc-v3p10"
And in example I will mention any one compatible.
Is it ok?
>
> > +- reg: Memory map for module access
> > +- interrupt-parent: Interrupt controller the interrupt is routed through
> > +- interrupts: Should contain the interrupt for the device
> > +- clock-name: List of input clocks - "sys", "flash"
>
> clock-names
Ok, will correct it in next version.
>
> > + (See clock bindings for details)
> > +- clocks: Clock phandles (see clock bindings for details)
> > +
> > +Optional properties:
> > +- arasan,has-mdma: Enables DMA support
>
> Can't you detect that based on the compatible (or thanks to a register). If it's something you
> choose when configuring the IP and can't detect at runtime I guess it's fine.
There is no way to select DMA when configuring the IP.
But it has internal DMA and there is a register to select PIO or DMA while starting a transfer.
So if user really don't want DMA, then we will never set DMA in the code based on DT property.
>
> > +
> > +For NAND partition information please refer the below file
> > +Documentation/devicetree/bindings/mtd/partition.txt
> > +
> > +Example:
> > + nand0: nand@...00000 {
> > + compatible = "xlnx,zynqmp-nand", "arasan,nfc-v3p10"
> > + reg = <0x0 0xff100000 0x1000>;
> > + clock-name = "sys", "flash"
> > + clocks = <&misc_clk &misc_clk>;
> > + interrupt-parent = <&gic>;
> > + interrupts = <0 14 4>;
> > + arasan,has-mdma;
> > + #address-cells = <1>;
> > + #size-cells = <0>
> > +
> > + nand@0 {
> > + reg = <0>
> > + partition@0 {
> > + label = "filesystem";
> > + reg = <0x0 0x0 0x1000000>;
> > + };
>
> Hm, not sure you need to define partitions in this example, but if you do, please define your
> partitions in a 'partitions' subnode:
>
> partitions {
> compatible = "fixed-partitions";
> #address-cells = <1>;
> #size-cells = <1>;
>
> partition@0 {
> reg = <0x0 0x1000000>;
> ...
> };
> ...
> };
>
> > + (...)
Ok, just now I saw Documentation/devicetree/bindings/mtd/marvell-nand.txt, I will update it accordingly in next version.
> > + };
> > + };
Thanks,
Naga Sureshkumar Relli.
Powered by blists - more mailing lists