[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAL_JsqJwXKx3MKE-8GuHqnJZ-047GxhHUB5LpW3O8j58OsAKuA@mail.gmail.com>
Date: Tue, 21 Aug 2018 14:09:20 -0500
From: Rob Herring <robh+dt@...nel.org>
To: Masahiro Yamada <yamada.masahiro@...ionext.com>
Cc: Vinod <vkoul@...nel.org>,
"open list:DMA GENERIC OFFLOAD ENGINE SUBSYSTEM"
<dmaengine@...r.kernel.org>,
Masami Hiramatsu <mhiramat@...nel.org>,
Jassi Brar <jaswinder.singh@...aro.org>,
devicetree@...r.kernel.org,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH 1/2] dt-bindings: dmaengine: add DT binding for UniPhier
MIO DMAC
On Tue, Aug 21, 2018 at 4:48 AM Masahiro Yamada
<yamada.masahiro@...ionext.com> wrote:
>
> (+CC Rob, DT, LKML)
>
> I forgot to CC this to DT community...
You really need to resend so that patchwork will pick it up and I'll
see it for sure.
>
>
> 2018-08-21 18:30 GMT+09:00 Masahiro Yamada <yamada.masahiro@...ionext.com>:
> > The MIO DMAC (Media IO DMA Controller) is used in UniPhier LD4,
> > Pro4, and sLD8 SoCs.
> >
> > Signed-off-by: Masahiro Yamada <yamada.masahiro@...ionext.com>
> > ---
> >
> > .../devicetree/bindings/dma/uniphier-mio-dmac.txt | 28 ++++++++++++++++++++++
> > 1 file changed, 28 insertions(+)
> > create mode 100644 Documentation/devicetree/bindings/dma/uniphier-mio-dmac.txt
> >
> > diff --git a/Documentation/devicetree/bindings/dma/uniphier-mio-dmac.txt b/Documentation/devicetree/bindings/dma/uniphier-mio-dmac.txt
> > new file mode 100644
> > index 0000000..a9e969e
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/dma/uniphier-mio-dmac.txt
> > @@ -0,0 +1,28 @@
> > +UniPhier Media IO DMA controller
> > +
> > +This works as an external DMA engine for SD/eMMC controllers etc.
> > +found in UniPhier LD4, Pro4, sLD8 SoCs.
> > +
> > +Required properties:
> > +- compatible: should be "socionext,uniphier-mio-dmac".
> > +- reg: offset and length of the register set for the device.
> > +- interrupts: a list of interrupt specifiers associated with the DMA channels.
> > +- clocks: a single clock specifier
> > +- #dma-cells: should be <1>. The single cell represents the channel number.
> > +- dma-channels: specify the number of the DMA channels. This should match to
> > + the number of tuples in the interrupts property.
> > +
> > +Example:
> > + dmac: dmac@...00000 {
dma-controller@...
> > + compatible = "socionext,uniphier-mio-dmac";
> > + reg = <0x5a000000 0x1000>;
> > + interrupts = <0 68 4>, <0 68 4>, <0 69 4>, <0 70 4>,
> > + <0 71 4>, <0 72 4>, <0 73 4>, <0 74 4>;
> > + clocks = <&mio_clk 7>;
> > + #dma-cells = <1>;
> > + dma-channels = <8>;
> > + };
> > +
> > +Note:
> > +In the example above, "interrupts = <0 68 4>, <0 68 4>, ..." is not a typo.
> > +The first two channels share a single interrupt line.
> > --
> > 2.7.4
> >
>
>
>
> --
> Best Regards
> Masahiro Yamada
Powered by blists - more mailing lists