[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <201808251010.KRlMjZ8C%fengguang.wu@intel.com>
Date: Sat, 25 Aug 2018 13:21:25 +0800
From: kbuild test robot <lkp@...el.com>
To: Dilip Kota <dkota@...eaurora.org>
Cc: kbuild-all@...org, swboyd@...omium.org, broonie@...nel.org,
mka@...omium.org, dianders@...omium.org,
linux-kernel@...r.kernel.org, linux-spi@...r.kernel.org,
Andy Gross <andy.gross@...aro.org>,
David Brown <david.brown@...aro.org>,
Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
linux-arm-msm@...r.kernel.org, linux-soc@...r.kernel.org,
devicetree@...r.kernel.org,
Girish Mahadevan <girishm@...eaurora.org>,
Dilip Kota <dkota@...eaurora.org>
Subject: Re: [PATCH V3] spi: spi-geni-qcom: Add SPI driver support for GENI
based QUP
Hi Girish,
Thank you for the patch! Yet something to improve:
[auto build test ERROR on spi/for-next]
[also build test ERROR on v4.18]
[if your patch is applied to the wrong git tree, please drop us a note to help improve the system]
url: https://github.com/0day-ci/linux/commits/Dilip-Kota/spi-spi-geni-qcom-Add-SPI-driver-support-for-GENI-based-QUP/20180824-190528
base: https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git for-next
config: i386-allmodconfig
compiler: gcc-7 (Debian 7.3.0-16) 7.3.0
reproduce:
make ARCH=i386 allmodconfig
make ARCH=i386
All errors (new ones prefixed by >>):
vim +239 drivers/spi/spi-geni-qcom.c
212
213 static int spi_geni_prepare_transfer_hardware(struct spi_master *spi)
214 {
215 struct spi_geni_master *mas = spi_master_get_devdata(spi);
216 struct geni_se *se = &mas->se;
217
218 if (!mas->setup) {
219 unsigned int proto = geni_se_read_proto(se);
220 unsigned int major, minor, step, ver;
221
222 if (proto != GENI_SE_SPI) {
223 dev_err(mas->dev, "Invalid proto %d\n", proto);
224 return -ENXIO;
225 }
226 mas->tx_fifo_depth = geni_se_get_tx_fifo_depth(se);
227 mas->rx_fifo_depth = geni_se_get_rx_fifo_depth(se);
228 mas->tx_fifo_width = geni_se_get_tx_fifo_width(se);
229
230 /*
231 * Hardware programming guide suggests to configure
232 * RX FIFO RFR level to fifo_depth-2.
233 */
234 geni_se_init(se, 0x0, mas->tx_fifo_depth - 2);
235 mas->oversampling = 1;
236 /* Transmit an entire FIFO worth of data per IRQ */
237 mas->tx_wm = 1;
238 ver = geni_se_get_qup_hw_version(se);
> 239 major = GENI_SE_VERSION_MAJOR(ver);
> 240 minor = GENI_SE_VERSION_MINOR(ver);
> 241 step = GENI_SE_VERSION_STEP(ver);
242
243 if (major == 1 && minor == 0)
244 mas->oversampling = 2;
245 mas->setup = 1;
246 }
247 return 0;
248 }
249
---
0-DAY kernel test infrastructure Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all Intel Corporation
Powered by blists - more mailing lists