[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20180828101213.25750-1-yinbo.zhu@nxp.com>
Date: Tue, 28 Aug 2018 18:12:13 +0800
From: Yinbo Zhu <yinbo.zhu@....com>
To: yinbo.zhu@....com, Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Catalin Marinas <catalin.marinas@....com>,
Will Deacon <will.deacon@....com>,
Ran Wang <ran.wang_1@....com>, linux-kernel@...r.kernel.org
Cc: xiaobo.xie@....com, Shawn Guo <shawnguo@...nel.org>,
Minghuan Lian <Minghuan.Lian@....com>,
Yuantian Tang <andy.tang@....com>,
Hou Zhiqiang <Zhiqiang.Hou@....com>,
Changming Huang <jerry.huang@....com>,
Sumit Garg <sumit.garg@....com>,
Fabio Estevam <fabio.estevam@....com>,
Li Yang <leoyang.li@....com>, devicetree@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org,
Rajesh Bhagat <rajesh.bhagat@...escale.com>
Subject: [PATCH v1] arm64: dts: ls1043a: Add configure-gfladj property to USB3 node
From: Rajesh Bhagat <rajesh.bhagat@...escale.com>
Add "configure-gfladj" boolean property to USB3 node. This property
is used to determine whether frame length adjustent is required or
not
Signed-off-by: Rajesh Bhagat <rajesh.bhagat@....com>
Signed-off-by: Ran Wang <ran.wang_1@....com>
---
arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 3 +++
1 files changed, 3 insertions(+), 0 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
index a830a2e..a3c5165 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
@@ -610,6 +610,7 @@
snps,dis-u1u2-when-u3-quirk;
snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
dma-coherent;
+ configure-gfladj;
};
usb1: usb3@...0000 {
@@ -623,6 +624,7 @@
snps,dis-u1u2-when-u3-quirk;
snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
dma-coherent;
+ configure-gfladj;
};
usb2: usb3@...0000 {
@@ -636,6 +638,7 @@
snps,dis-u1u2-when-u3-quirk;
snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
dma-coherent;
+ configure-gfladj;
};
sata: sata@...0000 {
--
1.7.1
Powered by blists - more mailing lists