linux-kernel - [PATCH v2 07/11] thermal: tsens: Add the SROT address map

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <d1d2e58288f4d78db924863ac1775c5e2e5c884a.1535462942.git.amit.kucheria@linaro.org>
Date:   Tue, 28 Aug 2018 19:08:36 +0530
From:   Amit Kucheria <amit.kucheria@...aro.org>
To:     linux-kernel@...r.kernel.org
Cc:     rnayak@...eaurora.org, linux-arm-msm@...r.kernel.org,
        bjorn.andersson@...aro.org, edubezval@...il.com,
        smohanad@...eaurora.org, andy.gross@...aro.org,
        dianders@...omium.org, mka@...omium.org,
        Zhang Rui <rui.zhang@...el.com>,
        Daniel Lezcano <daniel.lezcano@...aro.org>,
        linux-pm@...r.kernel.org
Subject: [PATCH v2 07/11] thermal: tsens: Add the SROT address map

On platforms whose device trees specify two address spaces for TSENS, the
second one points to the SROT registers. Initialise the SROT map on those
platforms.

Signed-off-by: Amit Kucheria <amit.kucheria@...aro.org>
Reviewed-by: Matthias Kaehlcke <mka@...omium.org>
---
 drivers/thermal/qcom/tsens-common.c | 14 ++++++++++++--
 drivers/thermal/qcom/tsens.h        |  1 +
 2 files changed, 13 insertions(+), 2 deletions(-)

diff --git a/drivers/thermal/qcom/tsens-common.c b/drivers/thermal/qcom/tsens-common.c
index 0585084630b3..0b8a793f15f4 100644
--- a/drivers/thermal/qcom/tsens-common.c
+++ b/drivers/thermal/qcom/tsens-common.c
@@ -117,16 +117,26 @@ static const struct regmap_config tsens_config = {
 
 int __init init_common(struct tsens_device *tmdev)
 {
-	void __iomem *tm_base;
+	void __iomem *tm_base, *srot_base;
 	struct resource *res;
 	struct platform_device *op = of_find_device_by_node(tmdev->dev->of_node);
 
 	if (!op)
 		return -EINVAL;
 
-	/* The driver only uses the TM register address space for now */
 	if (op->num_resources > 1) {
+		/* DT with separate SROT and TM address space */
 		tmdev->tm_offset = 0;
+		res = platform_get_resource(op, IORESOURCE_MEM, 1);
+		srot_base = devm_ioremap_resource(&op->dev, res);
+		if (IS_ERR(srot_base))
+			return PTR_ERR(srot_base);
+
+		tmdev->srot_map = devm_regmap_init_mmio(tmdev->dev,
+							srot_base, &tsens_config);
+		if (IS_ERR(tmdev->srot_map))
+			return PTR_ERR(tmdev->srot_map);
+
 	} else {
 		/* old DTs where SROT and TM were in a contiguous 2K block */
 		tmdev->tm_offset = 0x1000;
diff --git a/drivers/thermal/qcom/tsens.h b/drivers/thermal/qcom/tsens.h
index 58e98c4d3a8b..b9c4bcf255fa 100644
--- a/drivers/thermal/qcom/tsens.h
+++ b/drivers/thermal/qcom/tsens.h
@@ -70,6 +70,7 @@ struct tsens_device {
 	struct device			*dev;
 	u32				num_sensors;
 	struct regmap			*tm_map;
+	struct regmap			*srot_map;
 	u32				tm_offset;
 	struct tsens_context		ctx;
 	const struct tsens_ops		*ops;
-- 
2.17.1