| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1535464245-11638-10-git-send-email-richard.gong@linux.intel.com>
Date: Tue, 28 Aug 2018 08:50:45 -0500
From: richard.gong@...ux.intel.com
To: gregkh@...uxfoundation.org, catalin.marinas@....com,
will.deacon@....com, dinguyen@...nel.org, robh+dt@...nel.org,
mark.rutland@....com, atull@...nel.org, mdf@...nel.org,
arnd@...db.de, corbet@....net
Cc: linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
devicetree@...r.kernel.org, linux-fpga@...r.kernel.org,
linux-doc@...r.kernel.org, yves.vandervennet@...ux.intel.com,
richard.gong@...el.com
Subject: [PATCHv8 9/9] misc: add remote status update client support
From: Richard Gong <richard.gong@...el.com>
Extend Intel Stratix10 service layer to support the second service layer
client, Remote Status Update (RSU).
RSU is used to provide our customers with protection against loading bas
bitstreams onto their devices when those device are booting from flash.
Signed-off-by: Richard Gong <richard.gong@...el.com>
Signed-off-by: Alan Tull <atull@...nel.org>
---
v7: this patch is added in patch set version 7
v8: no change
---
drivers/misc/stratix10-svc.c | 39 ++++++++++++++++++++++++++++--------
include/linux/stratix10-smc.h | 6 ++++++
include/linux/stratix10-svc-client.h | 20 ++++++++++++++++--
3 files changed, 55 insertions(+), 10 deletions(-)
diff --git a/drivers/misc/stratix10-svc.c b/drivers/misc/stratix10-svc.c
index d552703..82ab423 100644
--- a/drivers/misc/stratix10-svc.c
+++ b/drivers/misc/stratix10-svc.c
@@ -35,7 +35,7 @@
* timeout is set to 30 seconds (30 * 1000) at Intel Stratix10 SoC.
*/
#define SVC_NUM_DATA_IN_FIFO 32
-#define SVC_NUM_CHANNEL 1
+#define SVC_NUM_CHANNEL 2
#define FPGA_CONFIG_DATA_CLAIM_TIMEOUT_MS 200
#define FPGA_CONFIG_STATUS_TIMEOUT_SEC 30
@@ -270,7 +270,7 @@ static void svc_thread_cmd_config_status(struct stratix10_svc_controller *ctrl,
* @cb_data: pointer to callback data structure to service client
* @res: result from SMC or HVC call
*
- * Send back the correspond status to the service client (FPGA manager etc).
+ * Send back the correspond status to the service clients.
*/
static void svc_thread_recv_status_ok(struct stratix10_svc_data *p_data,
struct stratix10_svc_cb_data *cb_data,
@@ -406,6 +406,16 @@ static int svc_normal_to_secure_thread(void *data)
a1 = 0;
a2 = 0;
break;
+ case COMMAND_RSU_STATUS:
+ a0 = INTEL_SIP_SMC_RSU_STATUS;
+ a1 = 0;
+ a2 = 0;
+ break;
+ case COMMAND_RSU_UPDATE:
+ a0 = INTEL_SIP_SMC_RSU_UPDATE;
+ a1 = pdata->arg[0];
+ a2 = 0;
+ break;
default:
pr_warn("it shouldn't happen\n");
break;
@@ -422,6 +432,19 @@ static int svc_normal_to_secure_thread(void *data)
(unsigned int)res.a1, (unsigned int)res.a2);
pr_debug(" res.a3=0x%016x\n", (unsigned int)res.a3);
+ if (pdata->command == COMMAND_RSU_STATUS) {
+ if (res.a0 == INTEL_SIP_SMC_RSU_ERROR)
+ cbdata->status = BIT(SVC_STATUS_RSU_ERROR);
+ else
+ cbdata->status = BIT(SVC_STATUS_RSU_OK);
+
+ cbdata->kaddr1 = &res;
+ cbdata->kaddr2 = NULL;
+ cbdata->kaddr3 = NULL;
+ pdata->chan->scl->receive_cb(pdata->chan->scl, cbdata);
+ continue;
+ }
+
switch (res.a0) {
case INTEL_SIP_SMC_STATUS_OK:
svc_thread_recv_status_ok(pdata, cbdata, res);
@@ -445,12 +468,7 @@ static int svc_normal_to_secure_thread(void *data)
pr_debug("%s: STATUS_REJECTED\n", __func__);
break;
case INTEL_SIP_SMC_FPGA_CONFIG_STATUS_ERROR:
- pr_err("%s: STATUS_ERROR\n", __func__);
- cbdata->status = BIT(SVC_STATUS_RECONFIG_ERROR);
- cbdata->kaddr1 = NULL;
- cbdata->kaddr2 = NULL;
- cbdata->kaddr3 = NULL;
- pdata->chan->scl->receive_cb(pdata->chan->scl, cbdata);
+ svc_thread_recv_status_err(pdata, cbdata, res);
break;
default:
pr_warn("it shouldn't happen\n");
@@ -971,6 +989,11 @@ static int stratix10_svc_drv_probe(struct platform_device *pdev)
chans[0].name = SVC_CLIENT_FPGA;
spin_lock_init(&chans[0].lock);
+ chans[1].scl = NULL;
+ chans[1].ctrl = controller;
+ chans[1].name = SVC_CLIENT_RSU;
+ spin_lock_init(&chans[1].lock);
+
list_add_tail(&controller->node, &svc_ctrl);
platform_set_drvdata(pdev, controller);
diff --git a/include/linux/stratix10-smc.h b/include/linux/stratix10-smc.h
index 14c7223..5be5dab 100644
--- a/include/linux/stratix10-smc.h
+++ b/include/linux/stratix10-smc.h
@@ -67,6 +67,12 @@
*
* INTEL_SIP_SMC_FPGA_CONFIG_STATUS_ERROR:
* There is error during the FPGA configuration process.
+ *
+ * INTEL_SIP_SMC_REG_ERROR:
+ * There is error during a read or write operation of the protected registers.
+ *
+ * INTEL_SIP_SMC_RSU_ERROR:
+ * There is error during a remote status update.
*/
#define INTEL_SIP_SMC_RETURN_UNKNOWN_FUNCTION 0xFFFFFFFF
#define INTEL_SIP_SMC_STATUS_OK 0x0
diff --git a/include/linux/stratix10-svc-client.h b/include/linux/stratix10-svc-client.h
index 4e5f0af..f7b09e3 100644
--- a/include/linux/stratix10-svc-client.h
+++ b/include/linux/stratix10-svc-client.h
@@ -10,8 +10,10 @@
* Service layer driver supports client names
*
* fpga: for FPGA configuration
+ * rsu: for remote status update
*/
#define SVC_CLIENT_FPGA "fpga"
+#define SVC_CLIENT_RSU "rsu"
/**
* Status of the sent command, in bit number
@@ -36,6 +38,9 @@
*
* SVC_COMMAND_STATUS_RECONFIG_ERROR:
* Error encountered during FPGA configuration.
+ *
+ * SVC_STATUS_RSU_OK:
+ * Secure firmware accepts the request of remote status update (RSU).
*/
#define SVC_STATUS_RECONFIG_REQUEST_OK 0
#define SVC_STATUS_RECONFIG_BUFFER_SUBMITTED 1
@@ -43,7 +48,8 @@
#define SVC_STATUS_RECONFIG_COMPLETED 3
#define SVC_STATUS_RECONFIG_BUSY 4
#define SVC_STATUS_RECONFIG_ERROR 5
-
+#define SVC_STATUS_RSU_OK 6
+#define SVC_STATUS_RSU_ERROR 7
/**
* Flag bit for COMMAND_RECONFIG
*
@@ -56,9 +62,11 @@
/**
* Timeout settings for service clients:
* timeout value used in Stratix10 FPGA manager driver.
+ * timeout value used in RSU driver
*/
#define SVC_RECONFIG_REQUEST_TIMEOUT_MS 100
#define SVC_RECONFIG_BUFFER_TIMEOUT_MS 240
+#define SVC_RSU_REQUEST_TIMEOUT_MS 300
struct stratix10_svc_chan;
@@ -81,13 +89,21 @@ struct stratix10_svc_chan;
* @COMMAND_RECONFIG_STATUS: check the status of the configuration, return
* status is SVC_STATUS_RECONFIG_COMPLETED, or SVC_STATUS_RECONFIG_BUSY, or
* SVC_STATUS_RECONFIG_ERROR
+ *
+ * @COMMAND_RSU_STATUS: request remote system update boot log, return status
+ * is log data or SVC_STATUS_RSU_ERROR
+ *
+ * @COMMAND_RSU_UPDATE: set the offset of the bitstream to boot after reboot,
+ * return status is SVC_STATUS_RSU_OK or SVC_STATUS_RSU_ERROR
*/
enum stratix10_svc_command_code {
COMMAND_NOOP = 0,
COMMAND_RECONFIG,
COMMAND_RECONFIG_DATA_SUBMIT,
COMMAND_RECONFIG_DATA_CLAIM,
- COMMAND_RECONFIG_STATUS
+ COMMAND_RECONFIG_STATUS,
+ COMMAND_RSU_STATUS,
+ COMMAND_RSU_UPDATE
};
/**
--
2.7.4
Powered by blists - more mailing lists