| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Tue, 28 Aug 2018 21:07:03 +0530
From: Amit Kucheria <amit.kucheria@...aro.org>
To: Andy Gross <andy.gross@...aro.org>
Cc: Rajendra Nayak <rnayak@...eaurora.org>,
linux-arm-msm <linux-arm-msm@...r.kernel.org>,
Bjorn Andersson <bjorn.andersson@...aro.org>,
Douglas Anderson <dianders@...omium.org>,
Matthias Kaehlcke <mka@...omium.org>,
Eduardo Valentin <edubezval@...il.com>,
David Brown <david.brown@...aro.org>,
Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Catalin Marinas <catalin.marinas@....com>,
Will Deacon <will.deacon@....com>,
"open list:ARM/QUALCOMM SUPPORT" <linux-soc@...r.kernel.org>,
"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS"
<devicetree@...r.kernel.org>,
lakml <linux-arm-kernel@...ts.infradead.org>,
LKML <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH v1] arm64: dts: sdm845: enable tsens thermal zones
Andy,
Do you have any feedback for this patch?
Regards,
Amit
On Wed, Jul 18, 2018 at 1:19 PM, Amit Kucheria <amit.kucheria@...aro.org> wrote:
> One thermal zone per cpu is defined
>
> Signed-off-by: Amit Kucheria <amit.kucheria@...aro.org>
> ---
> arch/arm64/boot/dts/qcom/sdm845.dtsi | 170 +++++++++++++++++++++++++++++++++++
> 1 file changed, 170 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
> index 01ff146..a75be7c 100644
> --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
> @@ -340,4 +340,174 @@
> };
> };
> };
> +
> + thermal-zones {
> + cpu0-thermal {
> + polling-delay-passive = <250>;
> + polling-delay = <1000>;
> +
> + thermal-sensors = <&tsens0 1>;
> +
> + trips {
> + cpu_alert0: trip0 {
> + temperature = <75000>;
> + hysteresis = <2000>;
> + type = "passive";
> + };
> +
> + cpu_crit0: trip1 {
> + temperature = <110000>;
> + hysteresis = <1000>;
> + type = "critical";
> + };
> + };
> + };
> +
> + cpu1-thermal {
> + polling-delay-passive = <250>;
> + polling-delay = <1000>;
> +
> + thermal-sensors = <&tsens0 2>;
> +
> + trips {
> + cpu_alert1: trip0 {
> + temperature = <75000>;
> + hysteresis = <2000>;
> + type = "passive";
> + };
> +
> + cpu_crit1: trip1 {
> + temperature = <110000>;
> + hysteresis = <1000>;
> + type = "critical";
> + };
> + };
> + };
> +
> + cpu2-thermal {
> + polling-delay-passive = <250>;
> + polling-delay = <1000>;
> +
> + thermal-sensors = <&tsens0 3>;
> +
> + trips {
> + cpu_alert2: trip0 {
> + temperature = <75000>;
> + hysteresis = <2000>;
> + type = "passive";
> + };
> +
> + cpu_crit2: trip1 {
> + temperature = <110000>;
> + hysteresis = <1000>;
> + type = "critical";
> + };
> + };
> + };
> +
> + cpu3-thermal {
> + polling-delay-passive = <250>;
> + polling-delay = <1000>;
> +
> + thermal-sensors = <&tsens0 4>;
> +
> + trips {
> + cpu_alert3: trip0 {
> + temperature = <75000>;
> + hysteresis = <2000>;
> + type = "passive";
> + };
> +
> + cpu_crit3: trip1 {
> + temperature = <110000>;
> + hysteresis = <1000>;
> + type = "critical";
> + };
> + };
> + };
> +
> + cpu4-thermal {
> + polling-delay-passive = <250>;
> + polling-delay = <1000>;
> +
> + thermal-sensors = <&tsens0 7>;
> +
> + trips {
> + cpu_alert4: trip0 {
> + temperature = <75000>;
> + hysteresis = <2000>;
> + type = "passive";
> + };
> +
> + cpu_crit4: trip1 {
> + temperature = <110000>;
> + hysteresis = <1000>;
> + type = "critical";
> + };
> + };
> + };
> +
> + cpu5-thermal {
> + polling-delay-passive = <250>;
> + polling-delay = <1000>;
> +
> + thermal-sensors = <&tsens0 8>;
> +
> + trips {
> + cpu_alert5: trip0 {
> + temperature = <75000>;
> + hysteresis = <2000>;
> + type = "passive";
> + };
> +
> + cpu_crit5: trip1 {
> + temperature = <110000>;
> + hysteresis = <1000>;
> + type = "critical";
> + };
> + };
> + };
> +
> + cpu6-thermal {
> + polling-delay-passive = <250>;
> + polling-delay = <1000>;
> +
> + thermal-sensors = <&tsens0 9>;
> +
> + trips {
> + cpu_alert6: trip0 {
> + temperature = <75000>;
> + hysteresis = <2000>;
> + type = "passive";
> + };
> +
> + cpu_crit6: trip1 {
> + temperature = <110000>;
> + hysteresis = <1000>;
> + type = "critical";
> + };
> + };
> + };
> +
> + cpu7-thermal {
> + polling-delay-passive = <250>;
> + polling-delay = <1000>;
> +
> + thermal-sensors = <&tsens0 10>;
> +
> + trips {
> + cpu_alert7: trip0 {
> + temperature = <75000>;
> + hysteresis = <2000>;
> + type = "passive";
> + };
> +
> + cpu_crit7: trip1 {
> + temperature = <110000>;
> + hysteresis = <1000>;
> + type = "critical";
> + };
> + };
> + };
> + };
> };
> --
> 2.7.4
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
> the body of a message to majordomo@...r.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists