linux-kernel - [PATCH 2/4] arm64: dts: fsl: ls1046a: disable uarts by default

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20180828204544.10815-2-alexandre.belloni@bootlin.com>
Date:   Tue, 28 Aug 2018 22:45:42 +0200
From:   Alexandre Belloni <alexandre.belloni@...tlin.com>
To:     Shawn Guo <shawnguo@...nel.org>
Cc:     Li Yang <leoyang.li@....com>, linux-kernel@...r.kernel.org,
        linux-arm-kernel@...ts.infradead.org,
        Alexandre Belloni <alexandre.belloni@...tlin.com>
Subject: [PATCH 2/4] arm64: dts: fsl: ls1046a: disable uarts by default

Disable the UARTs by defaultto avoid registering unused UARTs. This
effectively change the number of registered UARTS for the RDB and QDS from
4 to 2 but this seems the right thing to do.

It is especially useful when connecting other 8250 uart on PCIe for example
as the default maximum number of 8250 UARTs that can be registered is 4.

Signed-off-by: Alexandre Belloni <alexandre.belloni@...tlin.com>
---
 arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
index 2d8122019cd8..62ae3ee19d6f 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
@@ -423,6 +423,7 @@
 			reg = <0x00 0x21c0500 0x0 0x100>;
 			interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clockgen 4 1>;
+			status = "disabled";
 		};
 
 		duart1: serial@...0600 {
@@ -430,6 +431,7 @@
 			reg = <0x00 0x21c0600 0x0 0x100>;
 			interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clockgen 4 1>;
+			status = "disabled";
 		};
 
 		duart2: serial@...0500 {
@@ -437,6 +439,7 @@
 			reg = <0x0 0x21d0500 0x0 0x100>;
 			interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clockgen 4 1>;
+			status = "disabled";
 		};
 
 		duart3: serial@...0600 {
@@ -444,6 +447,7 @@
 			reg = <0x0 0x21d0600 0x0 0x100>;
 			interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clockgen 4 1>;
+			status = "disabled";
 		};
 
 		gpio0: gpio@...0000 {
-- 
2.18.0