| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <ec50c4f7-1c46-25ad-b4f2-72f292988751@intel.com>
Date: Wed, 29 Aug 2018 10:54:28 +0300
From: Adrian Hunter <adrian.hunter@...el.com>
To: Sayali Lokhande <sayalil@...eaurora.org>, subhashj@...eaurora.org,
cang@...eaurora.org, vivek.gautam@...eaurora.org,
rnayak@...eaurora.org, vinholikatti@...il.com,
jejb@...ux.vnet.ibm.com, martin.petersen@...cle.com,
asutoshd@...eaurora.org, evgreen@...omium.org,
riteshh@...eaurora.org
Cc: stummala@...eaurora.org, linux-scsi@...r.kernel.org,
open list <linux-kernel@...r.kernel.org>,
Joel Becker <jlbec@...lplan.org>
Subject: Re: [PATCH V11 2/2] scsi: ufs: Add configfs support for UFS
provisioning
Cc'ing Joel Becker for any suggestions about configfs
On 29/08/18 07:35, Sayali Lokhande wrote:
> This patch adds configfs support to provision UFS device at
> runtime. This feature can be primarily useful in factory or
> assembly line as some devices may be required to be configured
> multiple times during initial system development phase.
> Configuration Descriptors can be written multiple times until
> bConfigDescrLock attribute is zero.
>
> Configuration descriptor buffer consists of Device and Unit
> descriptor configurable parameters which are parsed from vendor
> specific provisioning file and then passed via configfs node at
> runtime to provision ufs device.
> CONFIG_CONFIGFS_FS and CONFIG_UFS_PROVISION needs to be enabled
> for using this feature.
>
> Usage:
> 1) To read current configuration descriptor with index X
> (where index X can be 0/1/2/3) :
> cat /config/XXXX.ufshc/ufs_config_desc_X
>
> 2) To write configuration descriptor with index X :
> echo <config_desc_buf> > /config/XXXX.ufshc/ufs_config_desc_X
>
> Signed-off-by: Sayali Lokhande <sayalil@...eaurora.org>
> ---
> Documentation/ABI/testing/configfs-driver-ufs | 12 ++
> drivers/scsi/ufs/Kconfig | 10 ++
> drivers/scsi/ufs/Makefile | 1 +
> drivers/scsi/ufs/ufs-configfs.c | 228 ++++++++++++++++++++++++++
> drivers/scsi/ufs/ufshcd.c | 3 +-
> drivers/scsi/ufs/ufshcd.h | 17 ++
> 6 files changed, 270 insertions(+), 1 deletion(-)
> create mode 100644 Documentation/ABI/testing/configfs-driver-ufs
> create mode 100644 drivers/scsi/ufs/ufs-configfs.c
>
> diff --git a/Documentation/ABI/testing/configfs-driver-ufs b/Documentation/ABI/testing/configfs-driver-ufs
> new file mode 100644
> index 0000000..75cfc9e
> --- /dev/null
> +++ b/Documentation/ABI/testing/configfs-driver-ufs
> @@ -0,0 +1,12 @@
> +What: /config/*/ufs_config_desc_X
> +Date: Jun 2018
> +KernelVersion: 4.19
> +Description:
> + This file shows the current ufs configuration descriptor with
Should mention that it is in bytes i.e.
This file shows the bytes of the ufs configuration descriptor with
> + index X (where X = 0/1/2/3) set in device. This can be used to
> + provision ufs device if bConfigDescrLock is 0.
> + For more details, refer 14.1.6.3 Configuration Descriptor and
> + table 14-12 - Unit Descriptor configurable parameters from specs for
> + description and format of each configuration descriptor parameter.
> + Parameters of Configuration descriptor buffer for respective index
> + needs to be passed in space separated format.
"needs to be passed as bytes in space separated format"
> diff --git a/drivers/scsi/ufs/Kconfig b/drivers/scsi/ufs/Kconfig
> index e27b4d4..a9a0a58 100644
> --- a/drivers/scsi/ufs/Kconfig
> +++ b/drivers/scsi/ufs/Kconfig
> @@ -100,3 +100,13 @@ config SCSI_UFS_QCOM
>
> Select this if you have UFS controller on QCOM chipset.
> If unsure, say N.
> +
> +config UFS_PROVISION
> + tristate "Runtime UFS Provisioning support"
> + depends on SCSI_UFSHCD && CONFIGFS_FS
> + help
> + This enables runtime UFS provisioning support. This can be used
> + primarily during assembly line as some devices may be required to
> + be configured multiple times during initial development phase.
> +
> + If unsure, say N.
> diff --git a/drivers/scsi/ufs/Makefile b/drivers/scsi/ufs/Makefile
> index 918f579..00110ea 100644
> --- a/drivers/scsi/ufs/Makefile
> +++ b/drivers/scsi/ufs/Makefile
> @@ -5,5 +5,6 @@ obj-$(CONFIG_SCSI_UFS_DWC_TC_PLATFORM) += tc-dwc-g210-pltfrm.o ufshcd-dwc.o tc-d
> obj-$(CONFIG_SCSI_UFS_QCOM) += ufs-qcom.o
> obj-$(CONFIG_SCSI_UFSHCD) += ufshcd-core.o
> ufshcd-core-objs := ufshcd.o ufs-sysfs.o
> +obj-$(CONFIG_UFS_PROVISION) += ufs-configfs.o
> obj-$(CONFIG_SCSI_UFSHCD_PCI) += ufshcd-pci.o
> obj-$(CONFIG_SCSI_UFSHCD_PLATFORM) += ufshcd-pltfrm.o
> diff --git a/drivers/scsi/ufs/ufs-configfs.c b/drivers/scsi/ufs/ufs-configfs.c
> new file mode 100644
> index 0000000..a4d26b7
> --- /dev/null
> +++ b/drivers/scsi/ufs/ufs-configfs.c
> @@ -0,0 +1,228 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +// Copyright (c) 2018, Linux Foundation.
> +
> +#include <linux/configfs.h>
> +#include <linux/err.h>
> +#include <linux/string.h>
> +
> +#include "ufs.h"
> +#include "ufshcd.h"
> +
> +static inline struct ufs_hba *config_item_to_hba(struct config_item *item)
> +{
> + struct config_group *group = to_config_group(item);
> + struct configfs_subsystem *subsys = to_configfs_subsystem(group);
> + struct ufs_hba *hba = container_of(subsys, struct ufs_hba, subsys);
> +
> + return subsys ? hba : NULL;
'subsys' won't be null unless 'item' is null, but 'item' is passed by
configfs, so that won't happen. i.e. might just as well return 'hba; directly.
> +}
> +
> +static ssize_t ufs_config_desc_show(struct config_item *item, char *buf,
> + u8 index)
> +{
> + struct ufs_hba *hba = config_item_to_hba(item);
> + u8 *desc_buf = NULL;
> + int desc_buf_len = hba->desc_size.conf_desc;
> + int i, ret, curr_len = 0;
> +
> + desc_buf = kmalloc(desc_buf_len, GFP_KERNEL);
> + if (!desc_buf)
> + return -ENOMEM;
> +
> + memset(desc_buf, 0, desc_buf_len);
Just use kzalloc
> +
> + ret = ufshcd_query_descriptor_retry(hba, UPIU_QUERY_OPCODE_READ_DESC,
> + QUERY_DESC_IDN_CONFIGURATION, index, 0, desc_buf, &desc_buf_len);
Indenting
> +
Blank line?
> + if (ret)
> + return ret;
> +
> + for (i = 0; i < desc_buf_len; i++)
> + curr_len += snprintf((buf + curr_len), (PAGE_SIZE - curr_len),
> + "0x%x ", desc_buf[i]);
Free desc_buf
> +
> + return curr_len;
> +}
> +
> +ssize_t ufshcd_desc_configfs_store(struct config_item *item,
> + const char *buf, size_t count, u8 index)
> +{
> + char *strbuf;
> + char *strbuf_copy;
> + struct ufs_hba *hba = config_item_to_hba(item);
> + u8 *desc_buf = NULL;
> + int desc_buf_len = hba->desc_size.conf_desc;
> + char *token;
> + int i, ret, value;
> + u32 config_desc_lock = 0;
> +
> + desc_buf = kmalloc(desc_buf_len, GFP_KERNEL);
> + if (!desc_buf)
> + return -ENOMEM;
> +
> + memset(desc_buf, 0, desc_buf_len);
Just use kzalloc
> +
> + /* reserve one byte for null termination */
> + strbuf = kmalloc(count + 1, GFP_KERNEL);
> + if (!strbuf)
> + return -ENOMEM;
> +
> + strbuf_copy = strbuf;
> + strlcpy(strbuf, buf, count + 1);
> +
> + /* Just return if bConfigDescrLock is already set */
> + ret = ufshcd_query_attr(hba, UPIU_QUERY_OPCODE_READ_ATTR,
> + QUERY_ATTR_IDN_CONF_DESC_LOCK, 0, 0, &config_desc_lock);
> + if (ret)
> + goto out;
> +
> + if (config_desc_lock) {
> + dev_err(hba->dev, "%s: bConfigDescrLock already set to %u, cannot re-provision device!\n",
> + __func__, config_desc_lock);
> + ret = -EINVAL;
> + goto out;
> + }
> +
> + for (i = 0; i < desc_buf_len; i++) {
> + token = strsep(&strbuf, " ");
> + if (!token && i)
> + break;
> +
> + ret = kstrtoint(token, 0, &value);
Why not unsigned, and also why not check the value is <= 255
> + if (ret) {
> + dev_err(hba->dev, "%s: kstrtoint failed %d %s\n",
> + __func__, ret, token);
> + ret = -EINVAL;
> + goto out;
> + }
> + desc_buf[i] = (u8)value;
> + }
> +
> + /* Write configuration descriptor to provision ufs */
> + ret = ufshcd_query_descriptor_retry(hba, UPIU_QUERY_OPCODE_WRITE_DESC,
> + QUERY_DESC_IDN_CONFIGURATION, index, 0, desc_buf, &desc_buf_len);
Indenting
> +
Blank line?
> + if (!ret)
> + dev_info(hba->dev, "%s: UFS Configuration Descriptor %u written\n",
> + __func__, index);
> +
> +out:
> + kfree(strbuf_copy);
Please arrange it so that the variable used for kfree is the same as the
variable assigned to kmalloc.
> + if (ret)
> + return ret;
Free desc_buf
> + return count;
> +}
> +
> +static ssize_t ufs_config_desc_0_show(struct config_item *item, char *buf)
> +{
> + return ufs_config_desc_show(item, buf, 0);
> +}
> +
> +static ssize_t ufs_config_desc_0_store(struct config_item *item,
> + const char *buf, size_t count)
> +{
> + return ufshcd_desc_configfs_store(item, buf, count, 0);
> +}
> +
> +static ssize_t ufs_config_desc_1_show(struct config_item *item, char *buf)
> +{
> + return ufs_config_desc_show(item, buf, 1);
> +}
> +
> +static ssize_t ufs_config_desc_1_store(struct config_item *item,
> + const char *buf, size_t count)
> +{
> + return ufshcd_desc_configfs_store(item, buf, count, 1);
> +}
> +
> +static ssize_t ufs_config_desc_2_show(struct config_item *item, char *buf)
> +{
> + return ufs_config_desc_show(item, buf, 2);
> +}
> +
> +static ssize_t ufs_config_desc_2_store(struct config_item *item,
> + const char *buf, size_t count)
> +{
> + return ufshcd_desc_configfs_store(item, buf, count, 2);
> +}
> +
> +static ssize_t ufs_config_desc_3_show(struct config_item *item, char *buf)
> +{
> + return ufs_config_desc_show(item, buf, 3);
> +}
> +
> +static ssize_t ufs_config_desc_3_store(struct config_item *item,
> + const char *buf, size_t count)
> +{
> + return ufshcd_desc_configfs_store(item, buf, count, 3);
> +}
> +
> +static struct configfs_attribute ufshcd_attr_provision_0 = {
> + .ca_name = "ufs_config_desc_0",
> + .ca_mode = 0644,
> + .ca_owner = THIS_MODULE,
> + .show = ufs_config_desc_0_show,
> + .store = ufs_config_desc_0_store,
> +};
> +
> +static struct configfs_attribute ufshcd_attr_provision_1 = {
> + .ca_name = "ufs_config_desc_1",
> + .ca_mode = 0644,
> + .ca_owner = THIS_MODULE,
> + .show = ufs_config_desc_1_show,
> + .store = ufs_config_desc_1_store,
> +};
> +
> +static struct configfs_attribute ufshcd_attr_provision_2 = {
> + .ca_name = "ufs_config_desc_2",
> + .ca_mode = 0644,
> + .ca_owner = THIS_MODULE,
> + .show = ufs_config_desc_2_show,
> + .store = ufs_config_desc_2_store,
> +};
> +
> +static struct configfs_attribute ufshcd_attr_provision_3 = {
> + .ca_name = "ufs_config_desc_3",
> + .ca_mode = 0644,
> + .ca_owner = THIS_MODULE,
> + .show = ufs_config_desc_3_show,
> + .store = ufs_config_desc_3_store,
> +};
> +
> +static struct configfs_attribute *ufshcd_attrs[] = {
> + &ufshcd_attr_provision_0,
> + &ufshcd_attr_provision_1,
> + &ufshcd_attr_provision_2,
> + &ufshcd_attr_provision_3,
> + NULL,
> +};
> +
> +static struct config_item_type ufscfg_type = {
> + .ct_attrs = ufshcd_attrs,
> + .ct_owner = THIS_MODULE,
> +};
> +
> +void ufshcd_configfs_init(struct ufs_hba *hba, const char *name)
> +{
> + int ret;
> + struct config_item *cg_item;
> + struct configfs_subsystem *subsys;
> +
> + cg_item = &hba->subsys.su_group.cg_item;
> + sprintf(cg_item->ci_namebuf, "%s", name);
> + cg_item->ci_type = &ufscfg_type;
> +
> + subsys = &hba->subsys;
> + config_group_init(&subsys->su_group);
> + mutex_init(&subsys->su_mutex);
> + ret = configfs_register_subsystem(subsys);
> + if (ret)
> + pr_err("Error %d while registering subsystem %s\n",
> + ret,
> + subsys->su_group.cg_item.ci_namebuf);
> +}
> +
> +void ufshcd_configfs_exit(struct ufs_hba *hba)
> +{
> + configfs_unregister_subsystem(&hba->subsys);
> +}
> diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
> index e01cdc0..608e23e 100644
> --- a/drivers/scsi/ufs/ufshcd.c
> +++ b/drivers/scsi/ufs/ufshcd.c
> @@ -7711,6 +7711,7 @@ int ufshcd_shutdown(struct ufs_hba *hba)
> void ufshcd_remove(struct ufs_hba *hba)
> {
> ufs_sysfs_remove_nodes(hba->dev);
> + ufshcd_configfs_exit(hba);
> scsi_remove_host(hba->host);
> /* disable interrupts */
> ufshcd_disable_intr(hba, hba->intr_mask);
> @@ -7965,7 +7966,7 @@ int ufshcd_init(struct ufs_hba *hba, void __iomem *mmio_base, unsigned int irq)
>
> async_schedule(ufshcd_async_scan, hba);
> ufs_sysfs_add_nodes(hba->dev);
> -
> + ufshcd_configfs_init(hba, dev_name(hba->dev));
> return 0;
>
> out_remove_scsi_host:
> diff --git a/drivers/scsi/ufs/ufshcd.h b/drivers/scsi/ufs/ufshcd.h
> index 45013b6..a340ca8 100644
> --- a/drivers/scsi/ufs/ufshcd.h
> +++ b/drivers/scsi/ufs/ufshcd.h
> @@ -37,6 +37,7 @@
> #ifndef _UFSHCD_H
> #define _UFSHCD_H
>
> +#include <linux/configfs.h>
> #include <linux/module.h>
> #include <linux/kernel.h>
> #include <linux/init.h>
> @@ -515,6 +516,9 @@ struct ufs_hba {
>
> struct Scsi_Host *host;
> struct device *dev;
> +#ifdef CONFIG_UFS_PROVISION
> + struct configfs_subsystem subsys;
> +#endif
> /*
> * This field is to keep a reference to "scsi_device" corresponding to
> * "UFS device" W-LU.
> @@ -868,6 +872,19 @@ int ufshcd_read_string_desc(struct ufs_hba *hba, int desc_index,
> int ufshcd_hold(struct ufs_hba *hba, bool async);
> void ufshcd_release(struct ufs_hba *hba);
>
> +/* Expose UFS configfs API's */
> +#ifndef CONFIG_UFS_PROVISION
> +static inline void ufshcd_configfs_init(struct ufs_hba *hba, const char *name)
> +{
> +}
> +static inline void ufshcd_configfs_exit(struct ufs_hba *hba)
> +{
> +}
> +#else
> +void ufshcd_configfs_init(struct ufs_hba *hba, const char *name);
> +void ufshcd_configfs_exit(struct ufs_hba *hba);
> +#endif
> +
> int ufshcd_map_desc_id_to_length(struct ufs_hba *hba, enum desc_idn desc_id,
> int *desc_length);
>
>
Powered by blists - more mailing lists