[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <1535507138-4626-1-git-send-email-Anson.Huang@nxp.com>
Date: Wed, 29 Aug 2018 09:45:38 +0800
From: Anson Huang <Anson.Huang@....com>
To: shawnguo@...nel.org, s.hauer@...gutronix.de, kernel@...gutronix.de,
fabio.estevam@....com, robh+dt@...nel.org, mark.rutland@....com,
linux-arm-kernel@...ts.infradead.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org
Cc: Linux-imx@....com
Subject: [PATCH] ARM: dts: imx7d-sdb: enable gpio buttons as wakeup source
This patch enables i.MX7D SDB board's below GPIO buttons
as wakeup sources:
S1(FUNC1): KEY_VOLUMEUP
S3(FUNC2): KEY_VOLUMEDOWN
Signed-off-by: Anson Huang <Anson.Huang@....com>
---
arch/arm/boot/dts/imx7d-sdb.dts | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/arm/boot/dts/imx7d-sdb.dts b/arch/arm/boot/dts/imx7d-sdb.dts
index c9b3c60..f1bafda 100644
--- a/arch/arm/boot/dts/imx7d-sdb.dts
+++ b/arch/arm/boot/dts/imx7d-sdb.dts
@@ -27,12 +27,14 @@
label = "Volume Up";
gpios = <&gpio5 11 GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEUP>;
+ wakeup-source;
};
volume-down {
label = "Volume Down";
gpios = <&gpio5 10 GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEDOWN>;
+ wakeup-source;
};
};
--
2.7.4
Powered by blists - more mailing lists