| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20180829212032.GB15786@amd>
Date: Wed, 29 Aug 2018 23:20:32 +0200
From: Pavel Machek <pavel@....cz>
To: linux-leds@...r.kernel.org, jacek.anaszewski@...il.com,
kernel list <linux-kernel@...r.kernel.org>,
linux-arm-kernel <linux-arm-kernel@...ts.infradead.org>,
linux-omap@...r.kernel.org, tony@...mide.com, sre@...nel.org,
nekit1000@...il.com, mpartap@....net, merlijn@...zup.org
Subject: [rfc] leds: add TI LMU backlight driver
Here's preview of driver for TI LMU. It controls LEDs on Droid 4
smartphone, including keyboard and screen backlights.
This adds backlight support for the following TI LMU
chips: LM3532, LM3631, LM3632, LM3633, LM3695 and LM3697.
Signed-off-by: Milo Kim <milo.kim@...com>
[add LED subsystem support for keyboard backlight and rework DT
binding according to Rob Herrings feedback]
Signed-off-by: Sebastian Reichel <sebastian.reichel@...labora.co.uk>
[remove backlight subsystem support for now]
Signed-off-by: Pavel Machek <pavel@....cz>
---
Does it looks mostly reasonable? I guess it will need some
s/BACKLIGHT/LEDS/ , and I'll need to remove my debugging hacks.
I'd prefer this to be LED driver, first; I'll need to figure out what
to do with backlight. I guess something like existing "backlight"
trigger should do the trick.
Best regards,
Pavel
diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
index 44097a3..7b0929e 100644
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -756,6 +756,13 @@ config LEDS_NIC78BX
To compile this driver as a module, choose M here: the module
will be called leds-nic78bx.
+config BACKLIGHT_TI_LMU
+ tristate "Backlight driver for TI LMU"
+ depends on BACKLIGHT_CLASS_DEVICE && MFD_TI_LMU
+ help
+ Say Y to enable the backlight driver for TI LMU devices.
+ This supports LM3532, LM3631, LM3632, LM3633, LM3695 and LM3697.
+
comment "LED Triggers"
source "drivers/leds/trigger/Kconfig"
diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
index 420b5d2..8edb9bf 100644
--- a/drivers/leds/Makefile
+++ b/drivers/leds/Makefile
@@ -78,6 +78,9 @@ obj-$(CONFIG_LEDS_MT6323) += leds-mt6323.o
obj-$(CONFIG_LEDS_LM3692X) += leds-lm3692x.o
obj-$(CONFIG_LEDS_SC27XX_BLTC) += leds-sc27xx-bltc.o
obj-$(CONFIG_LEDS_LM3601X) += leds-lm3601x.o
+ti-lmu-backlight-objs := ti-lmu-backlight-core.o \
+ ti-lmu-backlight-data.o
+obj-$(CONFIG_BACKLIGHT_TI_LMU) += ti-lmu-backlight.o
# LED SPI Drivers
obj-$(CONFIG_LEDS_CR0014114) += leds-cr0014114.o
diff --git a/drivers/leds/ti-lmu-backlight-core.c b/drivers/leds/ti-lmu-backlight-core.c
new file mode 100644
index 0000000..c9af061
--- /dev/null
+++ b/drivers/leds/ti-lmu-backlight-core.c
@@ -0,0 +1,556 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2015 Texas Instruments
+ * Copyright 2018 Sebastian Reichel
+ *
+ * TI LMU Backlight driver, based on previous work from
+ * Milo Kim <milo.kim@...com>
+ */
+
+#include <linux/bitops.h>
+#include <linux/device.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/leds.h>
+#include <linux/mfd/ti-lmu.h>
+#include <linux/mfd/ti-lmu-register.h>
+#include <linux/module.h>
+#include <linux/notifier.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+
+#include "ti-lmu-backlight-data.h"
+
+enum ti_lmu_bl_ramp_mode {
+ BL_RAMP_UP,
+ BL_RAMP_DOWN,
+};
+
+#define NUM_DUAL_CHANNEL 2
+#define LMU_BACKLIGHT_DUAL_CHANNEL_USED (BIT(0) | BIT(1))
+#define LMU_BACKLIGHT_11BIT_LSB_MASK (BIT(0) | BIT(1) | BIT(2))
+#define LMU_BACKLIGHT_11BIT_MSB_SHIFT 3
+
+struct ti_lmu_bank {
+ struct device *dev;
+ int bank_id;
+ const struct ti_lmu_bl_cfg *cfg;
+ struct ti_lmu *lmu;
+ const char *label;
+ int leds;
+ int current_brightness;
+ u32 default_brightness;
+ u32 ramp_up_msec;
+ u32 ramp_down_msec;
+
+ struct notifier_block nb;
+
+ struct backlight_device *backlight;
+ struct led_classdev *led;
+};
+
+static int ti_lmu_bl_enable(struct ti_lmu_bank *lmu_bank, bool enable)
+{
+ struct regmap *regmap = lmu_bank->lmu->regmap;
+ unsigned long enable_time = lmu_bank->cfg->reginfo->enable_usec;
+ u8 *reg = lmu_bank->cfg->reginfo->enable;
+ u8 mask = BIT(lmu_bank->bank_id);
+ u8 val = (enable == true) ? mask : 0;
+ int ret;
+
+ if (!reg)
+ return -EINVAL;
+
+ ret = regmap_update_bits(regmap, *reg, mask, val);
+ if (ret)
+ return ret;
+
+ if (enable_time > 0)
+ usleep_range(enable_time, enable_time + 100);
+
+ return 0;
+}
+
+static int ti_lmu_bl_update_brightness_register(struct ti_lmu_bank *lmu_bank,
+ int brightness)
+{
+ const struct ti_lmu_bl_cfg *cfg = lmu_bank->cfg;
+ const struct ti_lmu_bl_reg *reginfo = cfg->reginfo;
+ struct regmap *regmap = lmu_bank->lmu->regmap;
+ u8 reg, val;
+ int ret;
+
+ /*
+ * Brightness register update
+ *
+ * 11 bit dimming: update LSB bits and write MSB byte.
+ * MSB brightness should be shifted.
+ * 8 bit dimming: write MSB byte.
+ */
+ if (cfg->max_brightness == MAX_BRIGHTNESS_11BIT) {
+ reg = reginfo->brightness_lsb[lmu_bank->bank_id];
+ ret = regmap_update_bits(regmap, reg,
+ LMU_BACKLIGHT_11BIT_LSB_MASK,
+ brightness);
+ if (ret)
+ return ret;
+
+ val = brightness >> LMU_BACKLIGHT_11BIT_MSB_SHIFT;
+ } else {
+ val = brightness;
+ }
+
+ reg = reginfo->brightness_msb[lmu_bank->bank_id];
+ return regmap_write(regmap, reg, val);
+}
+
+static int ti_lmu_bl_set_brightness(struct ti_lmu_bank *lmu_bank,
+ int brightness)
+{
+ bool enable = brightness > 0;
+ int ret;
+
+ ret = ti_lmu_bl_enable(lmu_bank, enable);
+ if (ret)
+ return ret;
+
+ lmu_bank->current_brightness = brightness;
+
+ return ti_lmu_bl_update_brightness_register(lmu_bank, brightness);
+}
+
+static int ti_lmu_bl_set_led_blocking(struct led_classdev *ledc,
+ enum led_brightness value)
+{
+ struct ti_lmu_bank *lmu_bank = dev_get_drvdata(ledc->dev->parent);
+ int brightness = value;
+
+ return ti_lmu_bl_set_brightness(lmu_bank, brightness);
+}
+
+static int ti_lmu_bl_check_channel(struct ti_lmu_bank *lmu_bank)
+{
+ const struct ti_lmu_bl_cfg *cfg = lmu_bank->cfg;
+ const struct ti_lmu_bl_reg *reginfo = cfg->reginfo;
+
+ if (!reginfo->brightness_msb)
+ return -EINVAL;
+
+ if (cfg->max_brightness > MAX_BRIGHTNESS_8BIT) {
+ if (!reginfo->brightness_lsb)
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int ti_lmu_bl_create_channel(struct ti_lmu_bank *lmu_bank)
+{
+ struct regmap *regmap = lmu_bank->lmu->regmap;
+ const struct lmu_bl_reg_data *regdata = lmu_bank->cfg->reginfo->channel;
+ int num_channels = lmu_bank->cfg->num_channels;
+ unsigned long led_sources = lmu_bank->leds;
+ int i, ret;
+ u8 shift;
+
+ /*
+ * How to create backlight output channels:
+ * Check 'led_sources' bit and update registers.
+ *
+ * 1) Dual channel configuration
+ * The 1st register data is used for single channel.
+ * The 2nd register data is used for dual channel.
+ *
+ * 2) Multiple channel configuration
+ * Each register data is mapped to bank ID.
+ * Bit shift operation is defined in channel registers.
+ *
+ * Channel register data consists of address, mask, value.
+ */
+
+ if (num_channels == NUM_DUAL_CHANNEL) {
+ if (led_sources == LMU_BACKLIGHT_DUAL_CHANNEL_USED)
+ regdata++;
+
+ return regmap_update_bits(regmap, regdata->reg, regdata->mask,
+ regdata->val);
+ }
+
+ for (i = 0; regdata && i < num_channels; i++) {
+ /*
+ * Note that the result of regdata->val is shift bit.
+ * The bank_id should be shifted for the channel configuration.
+ */
+ if (test_bit(i, &led_sources)) {
+ shift = regdata->val;
+ ret = regmap_update_bits(regmap, regdata->reg,
+ regdata->mask,
+ lmu_bank->bank_id << shift);
+ if (ret)
+ return ret;
+ }
+
+ regdata++;
+ }
+
+ return 0;
+}
+
+static int ti_lmu_bl_update_ctrl_mode(struct ti_lmu_bank *lmu_bank)
+{
+ struct regmap *regmap = lmu_bank->lmu->regmap;
+ const struct lmu_bl_reg_data *regdata =
+ lmu_bank->cfg->reginfo->mode + lmu_bank->bank_id;
+ u8 val = regdata->val;
+
+ if (!regdata)
+ return 0;
+
+ /*
+ * Update PWM configuration register.
+ * If the mode is register based, then clear the bit.
+ */
+ val = 0;
+
+ return regmap_update_bits(regmap, regdata->reg, regdata->mask, val);
+}
+
+static int ti_lmu_bl_convert_ramp_to_index(struct ti_lmu_bank *lmu_bank,
+ enum ti_lmu_bl_ramp_mode mode)
+{
+ const int *ramp_table = lmu_bank->cfg->ramp_table;
+ const int size = lmu_bank->cfg->size_ramp;
+ unsigned int msec;
+ int i;
+
+ if (!ramp_table)
+ return -EINVAL;
+
+ switch (mode) {
+ case BL_RAMP_UP:
+ msec = lmu_bank->ramp_up_msec;
+ break;
+ case BL_RAMP_DOWN:
+ msec = lmu_bank->ramp_down_msec;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ if (msec <= ramp_table[0])
+ return 0;
+
+ if (msec > ramp_table[size - 1])
+ return size - 1;
+
+ for (i = 1; i < size; i++) {
+ if (msec == ramp_table[i])
+ return i;
+
+ /* Find an approximate index by looking up the table */
+ if (msec > ramp_table[i - 1] && msec < ramp_table[i]) {
+ if (msec - ramp_table[i - 1] < ramp_table[i] - msec)
+ return i - 1;
+ else
+ return i;
+ }
+ }
+
+ return -EINVAL;
+}
+
+
+static int ti_lmu_bl_set_ramp(struct ti_lmu_bank *lmu_bank)
+{
+ struct regmap *regmap = lmu_bank->lmu->regmap;
+ const struct ti_lmu_bl_reg *reginfo = lmu_bank->cfg->reginfo;
+ int offset = reginfo->ramp_reg_offset;
+ int i, ret, index;
+ struct lmu_bl_reg_data regdata;
+
+ for (i = BL_RAMP_UP; i <= BL_RAMP_DOWN; i++) {
+ index = ti_lmu_bl_convert_ramp_to_index(lmu_bank, i);
+ if (index > 0) {
+ if (!reginfo->ramp)
+ break;
+
+ regdata = reginfo->ramp[i];
+ if (lmu_bank->bank_id != 0)
+ regdata.val += offset;
+
+ /* regdata.val is shift bit */
+ ret = regmap_update_bits(regmap, regdata.reg,
+ regdata.mask,
+ index << regdata.val);
+ if (ret)
+ return ret;
+ }
+ }
+
+ return 0;
+}
+
+static int ti_lmu_bl_configure(struct ti_lmu_bank *lmu_bank)
+{
+ int ret;
+
+ ret = ti_lmu_bl_check_channel(lmu_bank);
+ if (ret)
+ return ret;
+
+ ret = ti_lmu_bl_create_channel(lmu_bank);
+ if (ret)
+ return ret;
+
+ ret = ti_lmu_bl_update_ctrl_mode(lmu_bank);
+ if (ret)
+ return ret;
+
+ return ti_lmu_bl_set_ramp(lmu_bank);
+}
+
+static int ti_lmu_bl_register_led(struct ti_lmu_bank *lmu_bank)
+{
+ int err;
+
+ printk("lmu: register_led\n");
+
+ lmu_bank->led = devm_kzalloc(lmu_bank->dev, sizeof(*lmu_bank->led),
+ GFP_KERNEL);
+ if (!lmu_bank->led)
+ return -ENOMEM;
+
+ lmu_bank->led->name = lmu_bank->label;
+ lmu_bank->led->max_brightness = lmu_bank->cfg->max_brightness;
+ lmu_bank->led->brightness_set_blocking =
+ ti_lmu_bl_set_led_blocking;
+
+ printk("lmu: register_led\n");
+
+ err = devm_led_classdev_register(lmu_bank->dev, lmu_bank->led);
+ if (err)
+ return err;
+
+ return 0;
+}
+
+static int ti_lmu_bl_add_device(struct ti_lmu_bank *lmu_bank)
+{
+ return ti_lmu_bl_register_led(lmu_bank);
+}
+
+static int setup_of_node(struct platform_device *pdev)
+{
+ struct device_node *parent_node = pdev->dev.parent->of_node;
+ char *name;
+
+ if (!parent_node)
+ return 0;
+
+ name = kasprintf(GFP_KERNEL, "bank%d", pdev->id);
+// name = kasprintf(GFP_KERNEL, "lcd_backlight", pdev->id);
+ if (!name) {
+ printk("No memory?!\n");
+ return -ENOMEM;
+ }
+
+ printk("Searching for device in parent: %pOFn", parent_node);
+
+ pdev->dev.of_node = of_get_child_by_name(parent_node, name);
+ kfree(name);
+
+ if (!pdev->dev.of_node) {
+ printk("No such child: %s\n", name);
+ return -ENODEV;
+ }
+
+ return 0;
+}
+
+static int ti_lmu_parse_led_sources(struct device *dev)
+{
+ unsigned long mask = 0;
+ int ret;
+ int size, i;
+ u32 *leds;
+
+ size = device_property_read_u32_array(dev, "ti,led-sources", NULL, 0);
+ if (size <= 0) {
+ dev_err(dev, "Missing or malformed property led-sources: %d\n",
+ size);
+ return size < 0 ? size : -EINVAL;
+ }
+
+ leds = kmalloc_array(size, sizeof(u32), GFP_KERNEL);
+ if (!leds)
+ return -ENOMEM;
+
+ ret = device_property_read_u32_array(dev, "ti,led-sources", leds, size);
+ if (ret) {
+ dev_err(dev, "Failed to read led-sources property: %d\n", ret);
+ goto out;
+ }
+
+ for (i = 0; i < size; i++)
+ set_bit(leds[i], &mask);
+
+ ret = mask;
+
+out:
+ kfree(leds);
+ return ret;
+}
+
+static int ti_lmu_bl_init(struct ti_lmu_bank *lmu_bank)
+{
+ struct regmap *regmap = lmu_bank->lmu->regmap;
+ const struct lmu_bl_reg_data *regdata =
+ lmu_bank->cfg->reginfo->init;
+ int num_init = lmu_bank->cfg->reginfo->num_init;
+ int i, ret;
+
+ if (lmu_bank->lmu->backlight_initialized)
+ return 0;
+ lmu_bank->lmu->backlight_initialized = true;
+
+ for (i = 0; regdata && i < num_init; i++) {
+ ret = regmap_update_bits(regmap, regdata->reg, regdata->mask,
+ regdata->val);
+ if (ret)
+ return ret;
+
+ regdata++;
+ }
+
+ return 0;
+}
+
+static int ti_lmu_bl_reload(struct ti_lmu_bank *lmu_bank)
+{
+ int err;
+
+ ti_lmu_bl_init(lmu_bank);
+
+ err = ti_lmu_bl_configure(lmu_bank);
+ if (err)
+ return err;
+
+ printk("lmu: set_brightness %d\n", lmu_bank->default_brightness);
+ return ti_lmu_bl_set_brightness(lmu_bank, lmu_bank->current_brightness);
+}
+
+static int ti_lmu_bl_monitor_notifier(struct notifier_block *nb,
+ unsigned long action, void *unused)
+{
+ struct ti_lmu_bank *lmu_bank = container_of(nb, struct ti_lmu_bank, nb);
+
+ if (action == LMU_EVENT_MONITOR_DONE) {
+ if (ti_lmu_bl_reload(lmu_bank))
+ return NOTIFY_STOP;
+ }
+
+ return NOTIFY_OK;
+}
+
+static int ti_lmu_bl_probe(struct platform_device *pdev)
+{
+ struct ti_lmu_bank *lmu_bank;
+ int err;
+
+ printk("lmu: bl probe\n");
+ err = setup_of_node(pdev);
+ if (err)
+ return err;
+
+ printk("lmu: bank\n");
+ lmu_bank = devm_kzalloc(&pdev->dev, sizeof(*lmu_bank), GFP_KERNEL);
+ if (!lmu_bank)
+ return -ENOMEM;
+ lmu_bank->dev = &pdev->dev;
+ dev_set_drvdata(&pdev->dev, lmu_bank);
+
+ err = device_property_read_string(&pdev->dev, "label",
+ &lmu_bank->label);
+ if (err)
+ return err;
+
+ if (!strcmp(lmu_bank->label, "keyboard")) {
+ lmu_bank->label = "kbd_backlight";
+ } else
+ lmu_bank->default_brightness = 255;
+
+ lmu_bank->leds = ti_lmu_parse_led_sources(&pdev->dev);
+ if (lmu_bank->leds < 0)
+ return lmu_bank->leds;
+ else if (lmu_bank->leds == 0)
+ return -EINVAL;
+
+ device_property_read_u32(&pdev->dev, "default-brightness-level",
+ &lmu_bank->default_brightness);
+ device_property_read_u32(&pdev->dev, "ti,ramp-up-ms",
+ &lmu_bank->ramp_up_msec);
+ device_property_read_u32(&pdev->dev, "ti,ramp-down-ms",
+ &lmu_bank->ramp_down_msec);
+
+ lmu_bank->lmu = dev_get_drvdata(pdev->dev.parent);
+ lmu_bank->cfg = &lmu_bl_cfg[lmu_bank->lmu->id];
+ lmu_bank->bank_id = pdev->id;
+
+ ti_lmu_bl_init(lmu_bank);
+
+ err = ti_lmu_bl_configure(lmu_bank);
+ if (err)
+ return err;
+
+ err = ti_lmu_bl_add_device(lmu_bank);
+ if (err)
+ return err;
+
+ printk("lmu: brightness\n");
+ err = ti_lmu_bl_set_brightness(lmu_bank,
+ lmu_bank->default_brightness);
+ if (err)
+ return err;
+
+ /*
+ * Notifier callback is required because backlight device needs
+ * reconfiguration after fault detection procedure is done by
+ * ti-lmu-fault-monitor driver.
+ */
+ if (lmu_bank->cfg->fault_monitor_used) {
+ lmu_bank->nb.notifier_call = ti_lmu_bl_monitor_notifier;
+ err = blocking_notifier_chain_register(&lmu_bank->lmu->notifier,
+ &lmu_bank->nb);
+ if (err)
+ return err;
+ }
+
+ return 0;
+}
+
+static int ti_lmu_bl_remove(struct platform_device *pdev)
+{
+ struct ti_lmu_bank *lmu_bank = platform_get_drvdata(pdev);
+
+ if (lmu_bank->cfg->fault_monitor_used)
+ blocking_notifier_chain_unregister(&lmu_bank->lmu->notifier,
+ &lmu_bank->nb);
+
+ ti_lmu_bl_set_brightness(lmu_bank, 0);
+
+ return 0;
+}
+
+static struct platform_driver ti_lmu_bl_driver = {
+ .probe = ti_lmu_bl_probe,
+ .remove = ti_lmu_bl_remove,
+ .driver = {
+ .name = "ti-lmu-led-backlight",
+ },
+};
+module_platform_driver(ti_lmu_bl_driver)
+
+MODULE_DESCRIPTION("TI LMU Backlight LED Driver");
+MODULE_AUTHOR("Sebastian Reichel");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:ti-lmu-led-backlight");
diff --git a/drivers/leds/ti-lmu-backlight-data.c b/drivers/leds/ti-lmu-backlight-data.c
new file mode 100644
index 0000000..583136c
--- /dev/null
+++ b/drivers/leds/ti-lmu-backlight-data.c
@@ -0,0 +1,304 @@
+/*
+ * TI LMU (Lighting Management Unit) Backlight Device Data
+ *
+ * Copyright 2015 Texas Instruments
+ *
+ * Author: Milo Kim <milo.kim@...com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "ti-lmu-backlight-data.h"
+
+/* LM3532 */
+static const struct lmu_bl_reg_data lm3532_init_data[] = {
+ { LM3532_REG_ZONE_CFG_A, LM3532_ZONE_MASK, LM3532_ZONE_0 },
+ { LM3532_REG_ZONE_CFG_B, LM3532_ZONE_MASK, LM3532_ZONE_1 },
+ { LM3532_REG_ZONE_CFG_C, LM3532_ZONE_MASK, LM3532_ZONE_2 },
+};
+
+static const struct lmu_bl_reg_data lm3532_channel_data[] = {
+ { LM3532_REG_OUTPUT_CFG, LM3532_ILED1_CFG_MASK,
+ LM3532_ILED1_CFG_SHIFT },
+ { LM3532_REG_OUTPUT_CFG, LM3532_ILED2_CFG_MASK,
+ LM3532_ILED2_CFG_SHIFT },
+ { LM3532_REG_OUTPUT_CFG, LM3532_ILED3_CFG_MASK,
+ LM3532_ILED3_CFG_SHIFT },
+};
+
+static const struct lmu_bl_reg_data lm3532_mode_data[] = {
+ { LM3532_REG_PWM_A_CFG, LM3532_PWM_A_MASK, LM3532_PWM_ZONE_0 },
+ { LM3532_REG_PWM_B_CFG, LM3532_PWM_B_MASK, LM3532_PWM_ZONE_1 },
+ { LM3532_REG_PWM_C_CFG, LM3532_PWM_C_MASK, LM3532_PWM_ZONE_2 },
+};
+
+static const struct lmu_bl_reg_data lm3532_ramp_data[] = {
+ { LM3532_REG_RAMPUP, LM3532_RAMPUP_MASK, LM3532_RAMPUP_SHIFT },
+ { LM3532_REG_RAMPDN, LM3532_RAMPDN_MASK, LM3532_RAMPDN_SHIFT },
+};
+
+static u8 lm3532_enable_reg = LM3532_REG_ENABLE;
+
+static u8 lm3532_brightness_regs[] = {
+ LM3532_REG_BRT_A,
+ LM3532_REG_BRT_B,
+ LM3532_REG_BRT_C,
+};
+
+static const struct ti_lmu_bl_reg lm3532_reg_info = {
+ .init = lm3532_init_data,
+ .num_init = ARRAY_SIZE(lm3532_init_data),
+ .channel = lm3532_channel_data,
+ .mode = lm3532_mode_data,
+ .ramp = lm3532_ramp_data,
+ .enable = &lm3532_enable_reg,
+ .brightness_msb = lm3532_brightness_regs,
+};
+
+/* LM3631 */
+static const struct lmu_bl_reg_data lm3631_init_data[] = {
+ { LM3631_REG_BRT_MODE, LM3631_MODE_MASK, LM3631_DEFAULT_MODE },
+ { LM3631_REG_BL_CFG, LM3631_MAP_MASK, LM3631_EXPONENTIAL_MAP },
+};
+
+static const struct lmu_bl_reg_data lm3631_channel_data[] = {
+ { LM3631_REG_BL_CFG, LM3631_BL_CHANNEL_MASK, LM3631_BL_SINGLE_CHANNEL },
+ { LM3631_REG_BL_CFG, LM3631_BL_CHANNEL_MASK, LM3631_BL_DUAL_CHANNEL },
+};
+
+static const struct lmu_bl_reg_data lm3631_ramp_data[] = {
+ { LM3631_REG_SLOPE, LM3631_SLOPE_MASK, LM3631_SLOPE_SHIFT },
+};
+
+static u8 lm3631_enable_reg = LM3631_REG_DEVCTRL;
+static u8 lm3631_brightness_msb_reg = LM3631_REG_BRT_MSB;
+static u8 lm3631_brightness_lsb_reg = LM3631_REG_BRT_LSB;
+
+static const struct ti_lmu_bl_reg lm3631_reg_info = {
+ .init = lm3631_init_data,
+ .num_init = ARRAY_SIZE(lm3631_init_data),
+ .channel = lm3631_channel_data,
+ .ramp = lm3631_ramp_data,
+ .enable = &lm3631_enable_reg,
+ .brightness_msb = &lm3631_brightness_msb_reg,
+ .brightness_lsb = &lm3631_brightness_lsb_reg,
+};
+
+/* LM3632 */
+static const struct lmu_bl_reg_data lm3632_init_data[] = {
+ { LM3632_REG_CONFIG1, LM3632_OVP_MASK, LM3632_OVP_25V },
+ { LM3632_REG_CONFIG2, LM3632_SWFREQ_MASK, LM3632_SWFREQ_1MHZ },
+};
+
+static const struct lmu_bl_reg_data lm3632_channel_data[] = {
+ { LM3632_REG_ENABLE, LM3632_BL_CHANNEL_MASK, LM3632_BL_SINGLE_CHANNEL },
+ { LM3632_REG_ENABLE, LM3632_BL_CHANNEL_MASK, LM3632_BL_DUAL_CHANNEL },
+};
+
+static const struct lmu_bl_reg_data lm3632_mode_data[] = {
+ { LM3632_REG_IO_CTRL, LM3632_PWM_MASK, LM3632_PWM_MODE },
+};
+
+static u8 lm3632_enable_reg = LM3632_REG_ENABLE;
+static u8 lm3632_brightness_msb_reg = LM3632_REG_BRT_MSB;
+static u8 lm3632_brightness_lsb_reg = LM3632_REG_BRT_LSB;
+
+static const struct ti_lmu_bl_reg lm3632_reg_info = {
+ .init = lm3632_init_data,
+ .num_init = ARRAY_SIZE(lm3632_init_data),
+ .channel = lm3632_channel_data,
+ .mode = lm3632_mode_data,
+ .enable = &lm3632_enable_reg,
+ .brightness_msb = &lm3632_brightness_msb_reg,
+ .brightness_lsb = &lm3632_brightness_lsb_reg,
+};
+
+/* LM3633 */
+static const struct lmu_bl_reg_data lm3633_init_data[] = {
+ { LM3633_REG_BOOST_CFG, LM3633_OVP_MASK, LM3633_OVP_40V },
+ { LM3633_REG_BL_RAMP_CONF, LM3633_BL_RAMP_MASK, LM3633_BL_RAMP_EACH },
+};
+
+static const struct lmu_bl_reg_data lm3633_channel_data[] = {
+ { LM3633_REG_HVLED_OUTPUT_CFG, LM3633_HVLED1_CFG_MASK,
+ LM3633_HVLED1_CFG_SHIFT },
+ { LM3633_REG_HVLED_OUTPUT_CFG, LM3633_HVLED2_CFG_MASK,
+ LM3633_HVLED2_CFG_SHIFT },
+ { LM3633_REG_HVLED_OUTPUT_CFG, LM3633_HVLED3_CFG_MASK,
+ LM3633_HVLED3_CFG_SHIFT },
+};
+
+static const struct lmu_bl_reg_data lm3633_mode_data[] = {
+ { LM3633_REG_PWM_CFG, LM3633_PWM_A_MASK, LM3633_PWM_A_MASK },
+ { LM3633_REG_PWM_CFG, LM3633_PWM_B_MASK, LM3633_PWM_B_MASK },
+};
+
+static const struct lmu_bl_reg_data lm3633_ramp_data[] = {
+ { LM3633_REG_BL0_RAMP, LM3633_BL_RAMPUP_MASK, LM3633_BL_RAMPUP_SHIFT },
+ { LM3633_REG_BL0_RAMP, LM3633_BL_RAMPDN_MASK, LM3633_BL_RAMPDN_SHIFT },
+};
+
+static u8 lm3633_enable_reg = LM3633_REG_ENABLE;
+
+static u8 lm3633_brightness_msb_regs[] = {
+ LM3633_REG_BRT_HVLED_A_MSB,
+ LM3633_REG_BRT_HVLED_B_MSB,
+};
+
+static u8 lm3633_brightness_lsb_regs[] = {
+ LM3633_REG_BRT_HVLED_A_LSB,
+ LM3633_REG_BRT_HVLED_B_LSB,
+};
+
+static const struct ti_lmu_bl_reg lm3633_reg_info = {
+ .init = lm3633_init_data,
+ .num_init = ARRAY_SIZE(lm3633_init_data),
+ .channel = lm3633_channel_data,
+ .mode = lm3633_mode_data,
+ .ramp = lm3633_ramp_data,
+ .ramp_reg_offset = 1, /* For LM3633_REG_BL1_RAMPUP/DN */
+ .enable = &lm3633_enable_reg,
+ .brightness_msb = lm3633_brightness_msb_regs,
+ .brightness_lsb = lm3633_brightness_lsb_regs,
+};
+
+/* LM3695 */
+static const struct lmu_bl_reg_data lm3695_init_data[] = {
+ { LM3695_REG_GP, LM3695_BRT_RW_MASK, LM3695_BRT_RW_MASK },
+};
+
+static const struct lmu_bl_reg_data lm3695_channel_data[] = {
+ { LM3695_REG_GP, LM3695_BL_CHANNEL_MASK, LM3695_BL_SINGLE_CHANNEL },
+ { LM3695_REG_GP, LM3695_BL_CHANNEL_MASK, LM3695_BL_DUAL_CHANNEL },
+};
+
+static u8 lm3695_enable_reg = LM3695_REG_GP;
+static u8 lm3695_brightness_msb_reg = LM3695_REG_BRT_MSB;
+static u8 lm3695_brightness_lsb_reg = LM3695_REG_BRT_LSB;
+
+static const struct ti_lmu_bl_reg lm3695_reg_info = {
+ .init = lm3695_init_data,
+ .num_init = ARRAY_SIZE(lm3695_init_data),
+ .channel = lm3695_channel_data,
+ .enable = &lm3695_enable_reg,
+ .enable_usec = 600,
+ .brightness_msb = &lm3695_brightness_msb_reg,
+ .brightness_lsb = &lm3695_brightness_lsb_reg,
+};
+
+/* LM3697 */
+static const struct lmu_bl_reg_data lm3697_init_data[] = {
+ { LM3697_REG_RAMP_CONF, LM3697_RAMP_MASK, LM3697_RAMP_EACH },
+};
+
+static const struct lmu_bl_reg_data lm3697_channel_data[] = {
+ { LM3697_REG_HVLED_OUTPUT_CFG, LM3697_HVLED1_CFG_MASK,
+ LM3697_HVLED1_CFG_SHIFT },
+ { LM3697_REG_HVLED_OUTPUT_CFG, LM3697_HVLED2_CFG_MASK,
+ LM3697_HVLED2_CFG_SHIFT },
+ { LM3697_REG_HVLED_OUTPUT_CFG, LM3697_HVLED3_CFG_MASK,
+ LM3697_HVLED3_CFG_SHIFT },
+};
+
+static const struct lmu_bl_reg_data lm3697_mode_data[] = {
+ { LM3697_REG_PWM_CFG, LM3697_PWM_A_MASK, LM3697_PWM_A_MASK },
+ { LM3697_REG_PWM_CFG, LM3697_PWM_B_MASK, LM3697_PWM_B_MASK },
+};
+
+static const struct lmu_bl_reg_data lm3697_ramp_data[] = {
+ { LM3697_REG_BL0_RAMP, LM3697_RAMPUP_MASK, LM3697_RAMPUP_SHIFT },
+ { LM3697_REG_BL0_RAMP, LM3697_RAMPDN_MASK, LM3697_RAMPDN_SHIFT },
+};
+
+static u8 lm3697_enable_reg = LM3697_REG_ENABLE;
+
+static u8 lm3697_brightness_msb_regs[] = {
+ LM3697_REG_BRT_A_MSB,
+ LM3697_REG_BRT_B_MSB,
+};
+
+static u8 lm3697_brightness_lsb_regs[] = {
+ LM3697_REG_BRT_A_LSB,
+ LM3697_REG_BRT_B_LSB,
+};
+
+static const struct ti_lmu_bl_reg lm3697_reg_info = {
+ .init = lm3697_init_data,
+ .num_init = ARRAY_SIZE(lm3697_init_data),
+ .channel = lm3697_channel_data,
+ .mode = lm3697_mode_data,
+ .ramp = lm3697_ramp_data,
+ .ramp_reg_offset = 1, /* For LM3697_REG_BL1_RAMPUP/DN */
+ .enable = &lm3697_enable_reg,
+ .brightness_msb = lm3697_brightness_msb_regs,
+ .brightness_lsb = lm3697_brightness_lsb_regs,
+};
+
+static int lm3532_ramp_table[] = { 0, 1, 2, 4, 8, 16, 32, 65 };
+
+static int lm3631_ramp_table[] = {
+ 0, 1, 2, 5, 10, 20, 50, 100,
+ 250, 500, 750, 1000, 1500, 2000, 3000, 4000,
+};
+
+static int common_ramp_table[] = {
+ 2, 250, 500, 1000, 2000, 4000, 8000, 16000,
+};
+
+#define LM3532_MAX_CHANNELS 3
+#define LM3631_MAX_CHANNELS 2
+#define LM3632_MAX_CHANNELS 2
+#define LM3633_MAX_CHANNELS 3
+#define LM3695_MAX_CHANNELS 2
+#define LM3697_MAX_CHANNELS 3
+
+const struct ti_lmu_bl_cfg lmu_bl_cfg[LMU_MAX_ID] = {
+ {
+ .reginfo = &lm3532_reg_info,
+ .num_channels = LM3532_MAX_CHANNELS,
+ .max_brightness = MAX_BRIGHTNESS_8BIT,
+ .pwm_action = UPDATE_PWM_AND_BRT_REGISTER,
+ .ramp_table = lm3532_ramp_table,
+ .size_ramp = ARRAY_SIZE(lm3532_ramp_table),
+ },
+ {
+ .reginfo = &lm3631_reg_info,
+ .num_channels = LM3631_MAX_CHANNELS,
+ .max_brightness = MAX_BRIGHTNESS_11BIT,
+ .pwm_action = UPDATE_PWM_ONLY,
+ .ramp_table = lm3631_ramp_table,
+ .size_ramp = ARRAY_SIZE(lm3631_ramp_table),
+ },
+ {
+ .reginfo = &lm3632_reg_info,
+ .num_channels = LM3632_MAX_CHANNELS,
+ .max_brightness = MAX_BRIGHTNESS_11BIT,
+ .pwm_action = UPDATE_PWM_ONLY,
+ },
+ {
+ .reginfo = &lm3633_reg_info,
+ .num_channels = LM3633_MAX_CHANNELS,
+ .max_brightness = MAX_BRIGHTNESS_11BIT,
+ .pwm_action = UPDATE_MAX_BRT,
+ .ramp_table = common_ramp_table,
+ .size_ramp = ARRAY_SIZE(common_ramp_table),
+ .fault_monitor_used = true,
+ },
+ {
+ .reginfo = &lm3695_reg_info,
+ .num_channels = LM3695_MAX_CHANNELS,
+ .max_brightness = MAX_BRIGHTNESS_11BIT,
+ .pwm_action = UPDATE_PWM_AND_BRT_REGISTER,
+ },
+ {
+ .reginfo = &lm3697_reg_info,
+ .num_channels = LM3697_MAX_CHANNELS,
+ .max_brightness = MAX_BRIGHTNESS_11BIT,
+ .pwm_action = UPDATE_PWM_AND_BRT_REGISTER,
+ .ramp_table = common_ramp_table,
+ .size_ramp = ARRAY_SIZE(common_ramp_table),
+ .fault_monitor_used = true,
+ },
+};
diff --git a/drivers/leds/ti-lmu-backlight-data.h b/drivers/leds/ti-lmu-backlight-data.h
new file mode 100644
index 0000000..c64e8e6
--- /dev/null
+++ b/drivers/leds/ti-lmu-backlight-data.h
@@ -0,0 +1,95 @@
+/*
+ * TI LMU (Lighting Management Unit) Backlight Device Data Definitions
+ *
+ * Copyright 2015 Texas Instruments
+ *
+ * Author: Milo Kim <milo.kim@...com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __TI_LMU_BACKLIGHT_H__
+#define __TI_LMU_BACKLIGHT_H__
+
+#include <linux/mfd/ti-lmu.h>
+#include <linux/mfd/ti-lmu-register.h>
+
+#define MAX_BRIGHTNESS_8BIT 255
+#define MAX_BRIGHTNESS_11BIT 2047
+
+enum ti_lmu_bl_pwm_action {
+ /* Update PWM duty, no brightness register update is required */
+ UPDATE_PWM_ONLY,
+ /* Update not only duty but also brightness register */
+ UPDATE_PWM_AND_BRT_REGISTER,
+ /* Update max value in brightness registers */
+ UPDATE_MAX_BRT,
+};
+
+struct lmu_bl_reg_data {
+ u8 reg;
+ u8 mask;
+ u8 val;
+};
+
+/**
+ * struct ti_lmu_bl_reg
+ *
+ * @init: Device initialization registers
+ * @num_init: Numbers of initialization registers
+ * @channel: Backlight channel configuration registers
+ * @mode: Brightness control mode registers
+ * @ramp: Ramp registers for lighting effect
+ * @ramp_reg_offset: Ramp register offset.
+ * Only used for multiple ramp registers.
+ * @enable: Enable control register address
+ * @enable_usec: Delay time for updating enable register.
+ * Unit is microsecond.
+ * @brightness_msb: Brightness MSB(Upper 8 bits) registers.
+ * Concatenated with LSB in 11 bit dimming mode.
+ * In 8 bit dimming, only MSB is used.
+ * @brightness_lsb: Brightness LSB(Lower 3 bits) registers.
+ * Only valid in 11 bit dimming mode.
+ */
+struct ti_lmu_bl_reg {
+ const struct lmu_bl_reg_data *init;
+ int num_init;
+ const struct lmu_bl_reg_data *channel;
+ const struct lmu_bl_reg_data *mode;
+ const struct lmu_bl_reg_data *ramp;
+ int ramp_reg_offset;
+ u8 *enable;
+ unsigned long enable_usec;
+ u8 *brightness_msb;
+ u8 *brightness_lsb;
+};
+
+/**
+ * struct ti_lmu_bl_cfg
+ *
+ * @reginfo: Device register configuration
+ * @num_channels: Number of backlight channels
+ * @max_brightness: Max brightness value of backlight device
+ * @pwm_action: How to control brightness registers in PWM mode
+ * @ramp_table: [Optional] Ramp time table for lighting effect.
+ * It's used for searching approximate register index.
+ * @size_ramp: [Optional] Size of ramp table
+ * @fault_monitor_used: [Optional] Set true if the device needs to handle
+ * LMU fault monitor event.
+ *
+ * This structure is used for device specific data configuration.
+ */
+struct ti_lmu_bl_cfg {
+ const struct ti_lmu_bl_reg *reginfo;
+ int num_channels;
+ int max_brightness;
+ enum ti_lmu_bl_pwm_action pwm_action;
+ int *ramp_table;
+ int size_ramp;
+ bool fault_monitor_used;
+};
+
+extern const struct ti_lmu_bl_cfg lmu_bl_cfg[LMU_MAX_ID];
+#endif
--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
Download attachment "signature.asc" of type "application/pgp-signature" (182 bytes)
Powered by blists - more mailing lists